Sublime text 3 системе не удается найти указанный путь
Когда я запускаю mklink /D "C:\Users\bwilliams\AppData\Roaming\Sublime Text 2" "C:\Users\bwilliams\Dropbox\Sublime Text" , я получаю эту ошибку:`У вас недостаточно прав для выполнения этого операция.
Почему бы и нет? Я администратор, и я просто хочу создать ссылку в моей собственной папке Users\bwilliams на другую папку в моей папке Users\bwilliams? Что я здесь не так делаю?
15 Answers 15
seems it's because Windows or another program is blocking the file. Sublime text uses a temporal file instead of editing the file directly, and when you save the file uses a API command to move this edited file to the original, so this command has restrictions when one file is locked and Sublime shows this alert.
Maybe this setting will work for you.
it sounds logic. in my case, i exit an app called Prepros, nothing change, but maybe the problem* is with a file sync app named 4sync (( by the way, really good ))
I am also using prepros. The best thing to do is not to "save as", but instead just create a new file and copy&paste the code into it.
This fixed it for me. I'm using FTPUse to make an ftp folder look like a regular drive to all programs. Notepad++, MS Word, Visual Studio, Brackets, everything worked fine except Sublime (3). It would open the files fine, but not save them. the atomic fix worked. Needs to be investigated.
Same thing here. Using SFTP Net Drive to map a remote server as a local Windows drive. When atomic_save is true, it gives me Unable to save Q:\django_files\django_jquery_blog_post\public_files_for_aliteralmind\post_backup\post_3of3.txt: Error: MoveFileEx(Q:\django_files\django_jquery_blog_post\public_files_for_aliteralmind\post_backup\.subl649.tmp, Q:\django_files\django_jquery_blog_post\public_files_for_aliteralmind\post_backup\post_3of3.txt) failed, A device attached to the system is not functioning.
Go to the path where you installed sublime text 2 and.
- Right click on the sublime_text 2.exe file.
- Go to its properties.
- Go to compatibility section under this.
- Set its privilege level to "Run this program as an administrator".
- Now change settings for all users and there also check the field "Run this program as an administrator".
- Apply the changes.
Even though I had set sublime_text.exe in ProgramFiles to do this, I still had to go to the link in C:\ProgramData\Microsoft\Windows\Start Menu\Programs and change the shortcut to also be run as an Administrator. This solved the problem for me.
As @Nathan Tuggy pointed out further down the comment chain, simply giving the program administrator privileges like that is not the wisest move. Any bugs or vulnerabilities in the program will then also have administrator level access to the machine it is running on.
I just solved the same issue on Sublime Text 3 beta, Stable Channel Build 3065 by doing the following under Windows 7:
- Navigate to the Sublime Text 3 executable file, wherever you have it installed.
- Right-click it and select properties.
- Click on the tab marked "Security"
- About half way down the tab, on the right hand side, under the list of group and user names is this little button:
- If your machine is setup the way I suspect it is (otherwise you probably would not be having this issue), you should be prompted for your administrator account credentials. Enter them.
- Now, select the Users group in the list, then take a look in the box at the bottom labeled 'Permissions for Users'. Put a check mark in the 'Allow' column for the 'Write' item.
- Click 'Apply'
- Click 'OK'
You should be set. What this does is it essentially gives Sublime the ability to write files while running with regular user privileges, no administrator level access required. Upon taking a better look at your error, what is happening is Sublime Text is creating a temp file for editing, rather than editing to file itself, then attempting to overwrite the original file with the temp on save. The problem is that the program is not being run by a user with sufficient privileges to perform the overwrite, hence the failure with an 'Access denied' message.
It seems the PATH in sublime doesn't match the system variable.
My System Variable PATH is
C:\ProgramData\Oracle\Java\javapath;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Users\lwj.dnx\bin;C:\Program Files\Microsoft DNX\Dnvm\;C:\Program Files\Microsoft SQL Server\130\Tools\Binn\;C:\Program Files\nodejs\;C:\Program Files (x86)\Skype\Phone\;C:\Ruby23-x64\bin;C:\Program Files (x86)\Microsoft VS Code\bin;C:\Program Files\nodejs;C:\Users\lwj\AppData\Roaming\npm;C:\Program Files\MongoDB\Server\3.2\bin;C:\Program Files\Git\bin;C:\wamp_2.5\bin\mysql\mysql5.6.17\bin;C:\Program Files\Java\jdk1.8.0_92\bin
However, in Sublime it is:
C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Users\lwj.dnx\bin;C:\Program Files\Microsoft DNX\Dnvm\;C:\Program Files\Microsoft SQL Server\130\Tools\Binn\;C:\Program Files\nodejs\;C:\Ruby23-x64\bin;C:\Program Files (x86)\Microsoft VS Code\bin;C:\Program Files\nodejs;C:\Users\lwj\AppData\Roaming\npm;C:\Program Files\MongoDB\Server\3.2\bin;C:\Program Files\Git\bin
Where I can modify the PATH for sublime text 3?
Sprogrammer007 commented Feb 13, 2014
hey Rushd can you give us more detail as to what do to? I added to custom settings and nothing
1 Answer 1
You modify the PATH in each build system by altering the "path" key. So, on Windows, you could have something like the following:
You'll notice that I used forward slashes / for the path delimiter (you can also use double backslashes \\ if you wish, just don't use single backslashes, as bad things™ could happen), a semi-colon ; to separate the path components, and the Unix-style $PATH environment variable to represent the rest of your path, if needed. In this case it isn't, but in some cases it may be. If you ever end up working on OS X or Linux systems, you'll of course always use forward slashes for path delimiters as well as colons : to separate paths.
In the above example I altered the "path" so the system could find the python executable. Alternatively, I could simply do:
and put the path to python.exe right in the "shell_cmd" field. Please read the complete build system docs (linked above) to find out about all the fun things you can do with them, and all the options and variations that are available.
The system cannot find the path specified.
[Finished in 0.0s with exit code 1]
[cmd: ['rspec spec\requests\static_pages_spec.rb']]
[dir:rspec H:\Sites\wedding_app]
[path: C:\ImageMagick-6.8.7-Q16;C:\RailsInstaller\Ruby2.0.0\bin;C:\Program Files (x86)\AMD APP\bin\x86_64;C:\Program Files (x86)\AMD APP\bin\x86;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\RailsInstaller\Ruby2.0.0\bin]
yes I know this has been asked before in a closed issue, but the answer says read "readme" I did and I don't get what I'm looking for. if I need to add environment path what am I add?
P.S I also got sublime 2 running with ruby test and it works fine on the same test. so what's the problem?
The text was updated successfully, but these errors were encountered:
janklimo commented Jul 5, 2014
The problem is resolved for me if you edit the file run_ruby_test.py in the RubyTest folder.
Line 202: change this:
Устранение проблемы
Если же найти указанный путь не получается при запуске торрент-клиента, то ошибка устраняется следующим образом:
- в самой программе кликнуть правой кнопкой мыши на загрузке с ошибкой;
- выбрать «Дополнительно», далее – «Загрузить в»;
- из открывшегося проводника открыть папку, в которую ранее загружался torrent.
После этого приложение самостоятельно проверит загруженные данные на актуальность и продолжит загрузку с того места, с которого она была прервана. Это актуально для uTorrent. В qBittorrent достаточно на загрузке кликнуть правой кнопкой мыши и выбрать «Переместить», указав актуальное месторасположение папки для закачки. Далее тоже выполняются проверка и возобновление закачки.
Если же данные были не перемещены, а удалены (безвозвратно, в том числе и из корзины), то загрузку придётся выполнить с самого начала. При указании новой папки закачка запустится автоматически с 0%.
Бывают случаи, когда папка физически существует, но торрент-клиент упорно не скачивает в неё файлы. Тогда следует проверить атрибуты папки для загрузок:
Далее следует перезапустить закачку в торрент-клиенте, загрузка должна возобновиться. Если же изменить атрибуты папки не удаётся (например, юзер пользуется учётной записью «Гость»), то данные сначала следует скопировать в другую папку и далее указать путь к ней в программе (через «Загрузить в»).
И последний вариант – это возникновение ошибки при обращении к сетевому хранилищу. Если компьютер подключён к сети и все требуемые права доступа администратором предоставлены, то следует:
- проверить актуальность адреса сетевого хранилища (в свойствах сетевого диска, адрес указывается в виде FTP://192.168.0.1, при необходимости – указать новый, который предоставит системный администратор);
- проверить, подключён ли кабель к сетевой карте и активно ли подключение в «Центре управления сетями».
Итак, если Виндовсу не удавалось найти месторасположение файла, то проблема устраняется вручную, указанием актуального его месторасположения. Это относится и к работе с «Проводником», и при запуске приложения с ярлыка на рабочем столе, и при использовании торрент-клиента.
rushd commented Feb 13, 2014
Hi
I had the same issue, with Win7 and ST3, which I have just resolved. The problem appears to be that in later versions of ST, the cmd has changed to an array format (whereas previously it was just a string?)
so you should look to reconstruct your cmd as something like this:
I hope this helps somebody
jkillian commented Jan 3, 2014
I think it may be related to the above commit - I'm getting the double backslash problem as well (using ST3 and Windows 8.1). Just a guess though, could be something different causing the problem
[cmd: ['rspec spec\\models\\settings_spec.rb -l4']]
3 ответа 3
Вам необходимо запустить mklink из командной строки с повышенными правами (щелкните правой кнопкой мыши ярлык командной строки, Запуск от имени администратора).
Если вы работаете в mklink от повышенной оболочки, проверьте права доступа к каталогу и убедитесь , что нет никаких явных разрешений Deny , установленных для группы администраторов.
Примечание. Убедитесь, что вы не пытаетесь создать ссылку, где каталог, содержащий файлы, уже существует, и случайно не создаете рекурсивный набор ссылок.
Я столкнулся с теми же проблемами:
Сначала я получил эту ошибку: You do not have sufficient privilege to perform this operation
И после повторной попытки с использованием повышенного cmd я запустил mklink /D linkToDir C:\temp\otherLink и получил эту ошибку: Cannot create a file when that file already exists.
Оказывается, был (сломан?) символическая ссылка там помечена как System:
Итак, к вашему сведению, убедитесь, что нет скрытого (фактически системного) файла, использующего это имя из ранее прерванного создания символической ссылки.
Это то, что я хотел бы подчеркнуть здесь.
Я столкнулся с той же проблемой и просто смог заставить ее работать. Я пытался заставить itunes выполнять резервное копирование на другой (больший) диск (C - это SSD).
Скажем, вы хотите перейти от c:\dir1\dirToRedirect к d:\dirToRedirectTo , а затем:
Убедитесь, что dirToRedirect не существует, потому что Windows собирается создать ссылку с тем же именем, что создает конфликт имен. Итак, удалите dirToRedirect , создайте dirToRedirectTo и запустите mklink /j "c:\dir1\dirToRedirect" "d:\dirToRedirectTo"
I didnt change any file paths and everything was working fine. I made one quick change saved it ok, did another change and I went to save it and got the following error. How can I solve this. It will save other files ok
Have you tried disabling your plugins to see if it's the editor causing the issue or a plugin you installed? I'm thinking it might be a plugin issue since I don't think ST, by default does any file moves.
I have this often using Sublime v3 beta. Works sometimes and then this error pops up again and again. Need to wait then can save a file again. Happens at random files.
EugZol commented Oct 22, 2014
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Ошибка типа «Системе не удаётся найти указанный путь» возникает при обращении к файлу или к папке, которые на момент запроса уже не существуют или были перемещены. Данные об этом пути имеются в программе или в ссылке (если это ярлык), с которой и производится запрос файла, но в «Проводнике» запрашиваемые данные уже отсутствуют. Windows в этом случае ещё предлагает вручную указать новый путь к необходимым данным.
Что делать, если системе не удаётся найти указанный путь
rushd commented Feb 14, 2014
custom settings? this is something you are trying to execute rather than configure ?
my suggestion was applied to a sublime-build script in ST3
but I think the issue is with the way cmd has been changed in the later version (a guess).
looking at your cmd instruction, I would look for something like this.
"cmd": ["rspec","spec\requests\static_pages_spec.rb"]
Lava9050 commented Jan 21, 2014
I have the exact same issue.
Tried starting SublimeText 3 as adminstrator
Output:
The system cannot find the path specified.
[Finished in 0.0s with exit code 1]
[cmd: ['rspec spec\configurator_spec.rb -l18']]
However when I copy this command to the command line, it works fine:
E:\temp\RubyProjects>rspec spec\configurator_spec.rb -l18
Run options: include [18]>
.
Finished in 0.04 seconds
1 example, 0 failures
Any news on this issue?
Причины ошибки
Самые распространённые причины, почему системе не удаётся найти указанный файл или путь, следующие:
- Попытка запуска приложения с ярлыка на рабочем столе. Но программа на этот момент уже деинсталлирована.
- Выполняется открытие сетевого хранилища, которое на текущий момент отключено (или выдан запрет на доступ).
- Используется программа для загрузки torrent-файлов. Если ранее торрент был добавлен в загрузки, но после закрытия приложения загруженные данные были удалены или перемещены, то при повторном открытии торрент-клиента он выдаёт ошибку о том, что процесс загрузки не может быть продолжен (именно так происходит в uTorrent).
- Повреждение MFT-данных. MFT – это зарезервированная область на жёстком диске, где содержится информация о текущей файловой системе. Именно там находятся имена всех файлов, точный путь их местоположения на винчестере. И эта область может быть повреждена, чаще из-за появления «битых» секторов на жёстком диске.
ВНИМАНИЕ. В редких случаях ошибка указывает на физическое повреждение данных жёсткого диска (часть информации становится недоступной для считывания). Проверить состояние винчестера можно с помощью таких программ, как Victoria HDD+. Если она обнаружит «битые» секторы, то такой носитель рекомендуется максимально скоро заменить, чтобы предотвратить утерю конфиденциальных данных. Проверку состояния HDD следует проводить регулярно, хотя бы 1 раз в 6 месяцев.
Читайте также: