Oracle guid тип данных
похоже, что в Oracle нет понятия AUTO_INCREMENT, вплоть до версии 11g.
Как я могу создать столбец, который ведет себя как автоматическое увеличение в Oracle 11g?
в Oracle нет таких столбцов, как" auto_increment "или" identity"по состоянию на Oracle 11g. Однако вы можете легко смоделировать его с помощью последовательности и триггера:
таблицы определения:
триггер определение:
обновление:
IDENTITY столбец теперь доступен на Oracle 12c:
или укажите начальные и инкрементные значения, также предотвращая любую вставку в идентификатор колонка ( GENERATED ALWAYS ) (опять же, Oracle 12c + только)
в Oracle 12c вперед вы могли бы сделать что-то вроде,
и в Oracle (до 12c).
- цифровой. Простое увеличение числового значения, например 1,2,3.
- GUID. глобальный универсальный идентификатор, как RAW тип данных.
- GUID (строка). То же, что и выше, но в виде строки, которая может быть проще обрабатывать на некоторых языках.
Oracle Database 12c представила идентификатор, автоматически инкрементный (системный) столбец. В предыдущих версиях базы данных (до 11g) вы обычно реализуете идентификатор, создавая последовательность и триггер. Начиная с 12c, вы можете создать свою собственную таблицу и определить столбец, который должен быть сгенерирован как идентификатор.
в следующей статье объясняется, как его использовать:
столбцы идентификаторов-новая запись в базе данных Oracle 12c
Trigger и Sequence может использоваться, когда вы хотите сериализованный номер, который любой может легко прочитать/запомнить/понять. Но если вы не хотите управлять столбцом ID (например, emp_id) таким образом, и значение этого столбца не очень значительное, вы можете использовать SYS_GUID() при создании таблицы, чтобы получить автоматическое увеличение, как это.
теперь ваш emp_id столбец будет принимать "значение глобального уникального идентификатора". вы можете вставить значение в таблицу, игнорируя столбец emp_id, как этот.
таким образом, он будет вставлять уникальное значение для вашего
Последовательность + Стол - в этом решении вы все еще создаете последовательность, как обычно, а затем используете следующий DDL:
создать таблицу MyTable (ИДЕНТИФИКАЦИОННЫЙ НОМЕР по умолчанию MyTable_Seq.NEXTVAL, . )
Таблица Только - в этом решении явно не указана последовательность. Вы бы использовали следующий DDL:
создать таблицу MyTable (ID NUMBER ГЕНЕРИРУЕТСЯ КАК IDENTITY, . )
это называется Identity Columns и он доступен только от oracle Oracle 12c
пример вставить в Identity Columns ниже
1 ряд создан.
вы не можете сделать вставку, как показано ниже
ошибка в строке 1: ORA-32795: не удается вставить в сгенерированный всегда столбец идентификаторов
ошибка в строке 1: ORA-32795: не удается вставить в всегда генерируется столбец идентификаторов
вот полное решение W.R. T исключение/обработка ошибок для автоматического увеличения, это решение обратно совместимо и будет работать на 11g & 12c, особенно если приложение находится в производстве.
пожалуйста, замените 'TABLE_NAME' на соответствующее имя таблицы
I wonder if Oracle's SYS_GUID() function returns a RFC 4122 compliant UUID. For example:
I know, that SYS_GUID() returns a 16 byte RAW datatype. Oracle uses RAWTOHEX() and probably TO_CHAR() to print out the above ID. Is it correct to interpret this as a UUID compliant string format like:
I think it's not compliant to the RFC 4122 standard, because the definition says, that a valid UUID must name the UUID-Version within the UUID itself.
Syntax for a RFC 4122 compliant UUID (Version 3):
The SYS_GUID returns a RAW datatype. The client (eg sqlplus) is rendering that into a readable format.
обновление:
IDENTITY столбец теперь доступен на Oracle 12c:
или укажите начальные и инкрементные значения, также предотвращая любую вставку в идентификатор колонка ( GENERATED ALWAYS ) (опять же, Oracle 12c + только)
в Oracle 12c вперед вы могли бы сделать что-то вроде,
и в Oracle (до 12c).
- цифровой. Простое увеличение числового значения, например 1,2,3.
- GUID. глобальный универсальный идентификатор, как RAW тип данных.
- GUID (строка). То же, что и выше, но в виде строки, которая может быть проще обрабатывать на некоторых языках.
Oracle Database 12c представила идентификатор, автоматически инкрементный (системный) столбец. В предыдущих версиях базы данных (до 11g) вы обычно реализуете идентификатор, создавая последовательность и триггер. Начиная с 12c, вы можете создать свою собственную таблицу и определить столбец, который должен быть сгенерирован как идентификатор.
в следующей статье объясняется, как его использовать:
столбцы идентификаторов-новая запись в базе данных Oracle 12c
Trigger и Sequence может использоваться, когда вы хотите сериализованный номер, который любой может легко прочитать/запомнить/понять. Но если вы не хотите управлять столбцом ID (например, emp_id) таким образом, и значение этого столбца не очень значительное, вы можете использовать SYS_GUID() при создании таблицы, чтобы получить автоматическое увеличение, как это.
теперь ваш emp_id столбец будет принимать "значение глобального уникального идентификатора". вы можете вставить значение в таблицу, игнорируя столбец emp_id, как этот.
таким образом, он будет вставлять уникальное значение для вашего
Последовательность + Стол - в этом решении вы все еще создаете последовательность, как обычно, а затем используете следующий DDL:
создать таблицу MyTable (ИДЕНТИФИКАЦИОННЫЙ НОМЕР по умолчанию MyTable_Seq.NEXTVAL, . )
Таблица Только - в этом решении явно не указана последовательность. Вы бы использовали следующий DDL:
создать таблицу MyTable (ID NUMBER ГЕНЕРИРУЕТСЯ КАК IDENTITY, . )
это называется Identity Columns и он доступен только от oracle Oracle 12c
пример вставить в Identity Columns ниже
1 ряд создан.
вы не можете сделать вставку, как показано ниже
ошибка в строке 1: ORA-32795: не удается вставить в сгенерированный всегда столбец идентификаторов
ошибка в строке 1: ORA-32795: не удается вставить в всегда генерируется столбец идентификаторов
вот полное решение W.R. T исключение/обработка ошибок для автоматического увеличения, это решение обратно совместимо и будет работать на 11g & 12c, особенно если приложение находится в производстве.
пожалуйста, замените 'TABLE_NAME' на соответствующее имя таблицы
I wonder if Oracle's SYS_GUID() function returns a RFC 4122 compliant UUID. For example:
I know, that SYS_GUID() returns a 16 byte RAW datatype. Oracle uses RAWTOHEX() and probably TO_CHAR() to print out the above ID. Is it correct to interpret this as a UUID compliant string format like:
I think it's not compliant to the RFC 4122 standard, because the definition says, that a valid UUID must name the UUID-Version within the UUID itself.
Syntax for a RFC 4122 compliant UUID (Version 3):
The SYS_GUID returns a RAW datatype. The client (eg sqlplus) is rendering that into a readable format.
обновление:
IDENTITY столбец теперь доступен на Oracle 12c:
или укажите начальные и инкрементные значения, также предотвращая любую вставку в идентификатор колонка ( GENERATED ALWAYS ) (опять же, Oracle 12c + only)
SYS_GUID возвращает идентификатор GUID-уникальный идентификатор. А SYS_GUID это RAW(16) . Он не генерирует увеличивающееся числовое значение.
если вы хотите создать увеличивающийся цифровой ключ, вы захотите создать последовательность.
или вы можете определить триггер, который автоматически заполняет значение первичного ключа, используя последовательность
если вы используете Oracle 11.1 или более поздней версии, вы можете упростить триггер немного
если вы действительно хотите использовать SYS_GUID
в Oracle 12c вперед вы можете сделать что-то вроде,
и в Oracle (Pre 12c).
- цифровой. Простое увеличение числового значения, например 1,2,3.
- GUID. глобальный универсальный идентификатор, как RAW тип данных.
- GUID (строка). То же, что и выше, но как строка, с которой может быть проще работать на некоторых языках.
x является столбцом идентификаторов. Заменить FOO С вашим именем таблицы в каждой из образцы.
Oracle 12c представляет эти два варианта, которые не зависят от триггеров:
первый использует последовательность традиционным способом; второй управляет значением внутренне.
предполагая, что вы имеете в виду столбец, подобный столбцу идентификатора SQL Server?
в Oracle вы используете последовательность для достижения той же функциональности. Я посмотрю, смогу ли найти хорошую ссылку и опубликовать ее здесь.
Oracle Database 12c представила идентификатор, автоматически инкрементный (системный) столбец. В предыдущих версиях базы данных (до 11g) вы обычно реализуете идентификатор, создавая последовательность и триггер. Начиная с 12c, вы можете создать свою собственную таблицу и определить столбец, который должен быть сгенерирован как идентификатор.
в следующей статье объясняется, как его использовать:
Trigger и Sequence может использоваться, когда вы хотите сериализованный номер, который любой может легко прочитать/запомнить/понять. Но если вы не хотите управлять столбцом ID (например, emp_id) таким образом, и значение этого столбца не очень значительное, вы можете использовать SYS_GUID() при создании таблицы, чтобы получить автоматическое приращение, как это.
теперь ваш emp_id столбец будет принимать "глобально уникальное значение идентификатора". вы можете вставить значение в таблицу, игнорируя столбец emp_id, как этот.
Итак, он вставит уникальное значение в ваш
начиная с Oracle 12c существует поддержка столбцов идентификаторов одним из двух способов:
Последовательность + Стол - в этом решении вы по-прежнему создаете последовательность, как обычно, а затем используете следующий DDL:
создать таблицу MyTable (ИДЕНТИФИКАЦИОННЫЙ НОМЕР по умолчанию MyTable_Seq.NEXTVAL, . )
Таблица Только - в этом решении последовательность явно не указана. Вы бы использовали следующий DDL:
создать таблицу MyTable (ID NUMBER ГЕНЕРИРУЕТСЯ КАК IDENTITY, . )
Если вы используете первый способ, он обратно совместим с существующим способом делать вещи. Второй немного более прост и более встроен в остальные системы RDMS.
это называется Identity Columns и он доступен только от oracle Oracle 12c
пример вставить в Identity Columns ниже
вы не можете вставить, как показано ниже
ошибка в строке 1: ORA-32795: не удается вставить в сгенерированный всегда столбец идентификаторов
ошибка в строке 1: ORA-32795: не удается вставить в всегда генерируется столбец идентификаторов
вот полное решение w.r.t обработка исключений / ошибок для автоматического увеличения, это решение обратно совместимо и будет работать на 11g & 12c, в частности, если приложение находится в производстве.
Oracle sequences are frequently used to provide unique numbers for primary keys where an appropriate unique key is not available. The use of sequences can cause a problem during data migrations and replication processes where duplication of the sequences occur. The use of a Universal Unique Identifier (UUID) solves this problem as each number is unique, rather than the next value in a sequential list of numbers. In addition, the UUID can be generated within the application server layer rather than the database, negating the need for extra round-trips to query the value of sequences or automatically assigned primary key values.
In this article I'll present three methods for generating UUIDs.
Using SYS_GUID()
An alternatively to a UUID is the SYS_GUID() function provided by Oracle to produce a Globally Unique Identifier, their equivalent of a UUID.
4 Answers 4
If you want that format try this:
Example Results:
Thats not returning an valid version 3 UUID because it should have the format xxxxxxxx-xxxx-3xxx-xxxx-xxxxxxxxxxxx (version 3) or xxxxxxxx-xxxx-4xxx-xxxx-xxxxxxxxxxxx (version 4)
SYS_GUID is Oracle's equivalent of UUID. It is globally unique. However, it is not compliant to RFC 4122; I'm inferring lack of compliance from the absence of references to UUID in the documentation (outside the Java XML documentation).
I suspect Oracle haven't natively implemented RFC 4122 because they don't think it scales. I can't imagine why else they would invent their own thing instead of complying to a standard.
With sufficient privileges, it is possible to have Oracle generate compliant UUIDs.
1. By defining a SQL function
The function requires dbms_crypto and utl_raw . Both require an execute grant.
2. Using a Java procedure
Validation mechanism:
Apart from determining whether the timestamp portion of the UUID
is in the future and therefore not yet assignable, there is no
mechanism for determining whether a UUID is 'valid'.
It is the generation process that determines "compliance" with RFC 4122, the UUID itself is just a 128 bit IDentifier.
Therefore the answer is yes, why would it not be compliant? A UUID is just an 128 bit Universaly Unique IDentifier, the rest of the spec is just recommended ways to help you/Oracle generate identifiers that do not collide with other systems that generate U.U. IDentifiers. If you or Oracle do not want to follow their recommendations, they are free to do so. Regardless, the uuid you gave is "in compliance" with RFC 4122 as the variant field starts with the bit sequence 111 which is "Reserved for future definition.". The spec was written in the past and does not restrict who can specify a "future definition", it certainly does not prevent Oracle from defining their own variants. therefore it is "in compliance". lol.
p.s. I love how the original authors anticipated your question and added sarcasm quotes around 'valid'.
When you want to generate a unique number, for a primary key, the most common idea (and the right one) is to get a number from an always increasing generator. Oracle provides SEQUENCE for this purpose, which is optimized, easy to use and scalable.
But some application developer has the idea to use a UUID (Universally Unique Identifier) also known as GUID (Globally Unique Identifier). The main advantage is that you do not need a shared object like a sequence because there is no need for a central authority. UUID is generated with a hash function on some local identifiers (host, process, thread) and the hash value is large enough to reduce the probability of collisions without the need for a shared central authority.
However, in the context of Oracle Database:
- having a shared object is not a problem, as we have a database
- large values are less efficient (more space in disk, memory and more CPU to process)
In order to put some numbers about this argument, I create a 10 million rows table with an ID generated from a SEQUENCE:
The data type returned by the sequence is a NUMBER:
A NUMBER stores two digits per bytes. Here, my 10 million values take on average less than 5 bytes:
This is very efficient. It is even smaller than a ROWID which is the internal identification of a row.
Here is a similar table with the ID generated as a GUID:
You can already see that it takes longer to generate. This generates a RAW datatype in 16 bytes.
This is very large. Each row where it is a primary key, and each foreign key, and indexes on them, will take 16 bytes where a large part is always the same (hashed from the host, and process). Note that a RAW is displayed with its hexadecimal character translation which is 32 characters here, but does not store it as a VARCHAR2(32) as this will be 2 times larger, and has some additional processing for characterset.
No surprise here, each value is 16 bytes:
I see only one advantage in GUID primary keys: they are RAW datatypes. I like it because we don’t want arithmetic operations on it. And in addition to that nobody will complain about gaps in numbering. Then, can we store our NUMBER from the sequence as a ROW?
Here, I’m converting to a varchar2 hexadecimal and then to a raw. There’s probably a more efficient method to convert a number to a binary row. UTL_RAW has a CAST_FROM_NUMBER but that is the NUMBER representation. There’s also a CAST_FROM_BINARY_INTEGER. Here, I did a simple conversion through a varchar2, not very nice but the execution time is correct.
This storage is even smaller than the NUMBER. 3 bytes instead of 5 bytes on average for those 10 million values:
This is totally expected as a byte can store 255 different values, but NUMBER uses only 99 ones with the two digits representation. In my opinion, it would make sense to have a SEQUENCE returning an integer as a RAW binary representation. But as I don’t think people will actually use it, I will not fill an Enhancement Request for that.
Here is the size for the tables and the index on this ID column:
Of course, this confirms what we have seen with the average size. The GUID is definitely not a good solution.
12cR2 introduced a compression algorithm for indexes which is interesting even when there are no repeated column values: ADVANCED HIGH (which is available in Enterprise Edition with Advanced Compression Option):
This reduced all 3 indexes. But the GUID one is still the largest one even if a large part of the values are repeated.
It is interesting to see that the benefit of RAW number vs. NUMBER datatype is smaller once compressed.
Here is where a NUMBER starts to be larger than a 16 bytes GUID:
1E30+1 is the first number that reaches 17 bytes. You will never reach this number with a sequence. Just calculate the size of a database storing these numbers — even with huge gaps in the sequences. That’s impossible. And anyway, GUID is not a solution there given the high probability of collisions.
In summary: do not use GUID or UUID for your primary keys.
A NUMBER generated from a SEQUENCE is the right/efficient/scalable way to get a unique identifier. And if you want to be sure to have no collision when merging or replicating from another system, then just add another ‘system identifier’ as an additional column in the primary key. This can be a node number in a distributed system, or a 3-letter identifier of the company. When column values have a repeated subset, there’s no efficient deduplication or compression techniques. But when it is a different column that is fully repeated, table and index compression can be used. So, if you really need to add a hashed hostname, put it in an additional column rather than the UUID idea of mixing all in one value.
похоже, что в Oracle нет концепции AUTO_INCREMENT, вплоть до версии 11g.
Как я могу создать столбец, который ведет себя как автоматическое приращение в Oracle 11g?
нет такой вещи, как столбцы "auto_increment" или "identity" в Oracle по состоянию на Oracle 11g. Однако вы можете легко смоделировать его с помощью последовательности и триггера:
Using Java
Using the Sun Microsystems implementation of the UUID and UUIDFactory classes that are available for download from OASIS ebXML Registry Reference Implementation Project (ebxmlrr). Once these are compiled and deployed in the application server layer new UUIDs can be generated using the following.
The UUIDDemo.java file provides an example of it's usage.
These classes, along with the UUIDGenerate class, should also be loaded into the database to allow UUIDs to be generated by DML and stored procedures. The classes can be compiled and loaded into the database using the loadjava executable.
Alternatively, the source can be loaded into that database using SQL*Plus or Oracle Enterprise Manager (OEM).
Once the classes are loaded a call specification should be created to allow access to the Java from PL/SQL.
The NEW_UUID function can then be tested.
The text represenation of the UUID stored in the database is 36 characters. If space is an issue this can be reduced by 4 characters by stripping the '-' from the toString() method in the UUID class.
Читайте также: