Обнаружен непредвиденный символ eof в файле данных bcp
This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.
Answered by:
Answered by:
10 Answers 10
If the file is tab-delimited then the command line flag for the column separator should be -t\t -t,
Actualy tab separated values is the default value for bcp so you don't have to specify any -t and -r at all. That's what I experienced by myself
Just an FYI that I encountered this same exact error and it turned out that my destination table contained one extra column than the DAT file!
"Unexpected EOF" normally means means the column or row terminator is not what you expect That is, your command line arguments for these do match the file
- Unix vs Windows line endings
- Text data containing your column delimiter (comma in actual data)
- Or a mix of the two.
SSMS should have nothing to do with it: it's the format (expected vs actual) that matters
Well I opened it in Notepad++ and the row terminator is CRLF. No embedded commas that I could find, but was getting the same error when I tab delimited it.
I every case that I have encountered this error, it ends up being an issue where the number of columns in the table do not the match the number of columns delimited in the text file. The easy way to confirm this is to load the text file into excel and compare the column count to that of the table.
I found that I needed to add a placeholder for my ID column value in the import file, even though it's an autogenerated index column. Seems to need that placeholder.
I think most of us prefer real-world examples than syntax hints, so here's what I did:
bcp LoadDB.dbo.test in C:\temp\test.txt -S 123.66.108.207 -U testuser -P testpass -c -r /r
My data was an extract from a Unix-based Oracle DB which was tab delimited and had an LF end of line character.
Because my data was tab delimited I did not specify a -t parameter, the bcp default is tab.
Because my row terminator was a LineFeed (LF) character, then I used -r /r
Because my data was all being loaded into char fields I used the -c parameter
Using bcp I'm trying to import a csv file to an Azure SQL Db table. But the following command gives the error shown below:
Unexpected EOF encountered in BCP data-file
Remarks:
- There are plenty of online posts on this error but none of those solutions (using -F 2 switch, changing -c to -n , adding -r \n or \r etc.) worked for me. I downloaded the csv file from here on Data.gov. Maybe, the error has something to do with the file - and if someone can make it work for that file, I would like to hear about the solution.
- I can successfully import the same csv to the same Db by using Import/Export wizard of SQL Server. But it needs to be done via bcp
- I'm using the latest version of bcp and the Azure, and Windows-10 Pro.
Question: What could be a cause of the error and how can we fix it?
UPDATE: In Notepad++ I have following options for Encoding:
What's the text encoding of the .csv file? What version of bcp.exe are you attempting to use (check with bcp.exe -v )? Only version 13 and later support UTF-8 encoded files, for example, which you'd specify with the -C 65001 parameter. If you're trying to deal with RFC 4180-compliant CSV files, where the fields may themselves contain commas , , quotes " and linebreak sequences, then you'll need to use BULK INSERT from within SQL Server 2017 or later.
@AlwaysLearning I'm using latest version Version: 15.0.2000.5 of bcp. When opened in Notepad++ the csv shows UTF-8 . If I specify -C 65001 it starts asking to enter input for each column (ref:). The csv (linked in my post above) is a large file with about 100 columns and I can't tell whether it has , quotes " or linebreak sequences. bcp needs to be used and BULK INSERT is not an option.
why does this need to be done via BCP? I can answer your question, but it will be an ugly solution to use BCP. the problem is the file. there's nothign 'wrong' with it, it's just not not a type of file that will load via BCP gracefully. Always, before going down the ugly path, I would ask why it MUST be BCP. Why cant this be done via SSIS package?
Answers
The source and destinations are exactly the same I have a script that creates the destination table so I can be sure that is the case.
No, they are not exactly the same, because if they were you would not get that error.
And even if they are - you are not bulk-loading into the table, you are bulk-loading to the view.
The tables are in different databases and may be in different instances as > well.
In the script you posted, the server instance and the database were the same. Whence my comment.
You could try adding a third step that generates a format file:
BCP srcdb.dbo.srctable format nul -n -f leveltbl.fmt -T -S srcinstance
And then replace -n in the other two commands with -f leveltbl.fmt.
No guarantees that it will work though, since I don't see the table and view definitions.
Question
I am using the following BCP commands in a PowerShell Script:
&BCP "SELECT [Level], [LevelName] FROM [database].[dbo].[table] WHERE [Level] &bcp '[database].[dbo].[View3Levels]' IN 'C:\datafile.dat' -n -T -S.\SQLEXPRESS
But I get the following error:
Starting copy.
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC Driver 11 for SQL Server]Unexpected EOF encountered in BCP data-file
1 rows copied.
Network packet size (bytes): 4096
Clock Time (ms.) Total : 16 Average : (62.50 rows per sec.)
The content of the data file looks like this:
Operation MaintenanceȀ Supervisor
Here is a screenshot from notepad++ if that helps.
Here is a screenshot of the data in the source database The 1 and 2 are just row numbers not part of the data.
[Level] [int] NOT NULL,
[LevelName] [nvarchar](20) NOT NULL,
I would be grateful for any help you can offer. I cannot figure out why this would fail. I am inserting into a view. The destination table has a lot more columns i was trying to use the view so I do not need to generate a format file. I have some code that is generating the PowerShell script and I am trying to keep this as simple as possible so it will be easy for my team to use.
1 Answer 1
If you have to import a csv file to an Azure SQL Db table, your data needs to use the ASCII or UTF-16 encoding since bcp does not support UTF-8.
If you're using Windows,
Using NotePad++ and under "Encoding" you can easily check and change the file encoding, change it to: UCS-2 LE BOM
This Document can give you a better understanding about changing encoding.
All replies
Can you try the -c instead of the -n? Also, you are copying from a table to a file and then from the file back to a table? Are you getting the error on the first or second bcp command? Also, something I found out the hard way, bcp must be on a single line. do not add any new lines or carriege returns to the command.
I ran into some complications with using the -c command so I would really like to use the -n if possible. Yes, I am going from table to file to table through a view. The error is on the import the export seems to work. I have also tried some variations like specifying the delimiters and line breaks using -t"|" and -r"\n".
This is my PS to download a SQL view/table to a flat file. You can use the BCP in tsql but then you have to use exec xp_commandshell which many shops do not like. That is why i used PS instead of xp_commandshell and tsql.
You can download from a SQL view into a flat file, but you cannot "INSERT into a view". You can only insert into a table.
What is the definition of View3Levels? As Brenda says, bulk-loading into a view is a spooky, but I guess it works if the view is insertable. However, the data types much match the source types exactly, as long as you don't use a format file.
But since this is the same instance, why using BCP in the first place? Why not just do:
INSERT View3Levels(Level, LevelName)
SELECT [Level], [LevelName] FROM [dbo].[table] WHERE [Level]
Erland Sommarskog, SQL Server MVP, esquel@sommarskog.se
The source and destinations are exactly the same I have a script that creates the destination table so I can be sure that is the case. The tables are in different databases and may be in different instances as well. I cannot count on being able to link the servers so this seemed like the best solution if I can get it to work. The View3Levels view points to two columns in another table they are the same as the source just different column names:
[temp_Level] [int] NOT NULL,
[temp_LevelName] [nvarchar](20) NOT NULL,
If you run into an issue where you see an Unexpected EOF encountered in BCP data-file, it will be one of two things.
1) When you export out with Subset, and import back into a target database, we use the internal tools from Microsoft to generate the export (bulk copy). If you are importing into a different version of Microsoft SQL server, you will get incompatibility errors, including the Unexpected EOF error.
2) Along with the same version of SQL Server, make sure the database you are subsetting from has the exact same database structure as the database you are importing to. In this example, there was a new foreign key constraint on the target database that did not exist in the source database, which made the generated subset incompatible with the target database.
To confirm your database structures are the same, you can export the DDL for both the source and target database, and perform a diff on the DDL's to confirm if the structure is the same. If you are not able to do this, you should refer to your DBA on the structure of your source and target databases are the same.
According to your posting, you would like to export the data from table ' [database].[dbo].[table] ' into data file ' C:\datafile.dat ' and them import it into the target table ' [database].[dbo].[View3Levels] '. Right?
Also if you only would like to insert the data from table '[database].[dbo].[table]' into the target table '[database].[dbo].[View3Levels]', why not insert the data directly? Please try to use INSERT INTO SELECT to realize your requirement .
Hope it can help you.
The source and destinations are exactly the same I have a script that creates the destination table so I can be sure that is the case.
No, they are not exactly the same, because if they were you would not get that error.
And even if they are - you are not bulk-loading into the table, you are bulk-loading to the view.
The tables are in different databases and may be in different instances as > well.
In the script you posted, the server instance and the database were the same. Whence my comment.
You could try adding a third step that generates a format file:
BCP srcdb.dbo.srctable format nul -n -f leveltbl.fmt -T -S srcinstance
And then replace -n in the other two commands with -f leveltbl.fmt.
No guarantees that it will work though, since I don't see the table and view definitions.
This works for me. I just insert back into a table on the same server and database. xp_cmdshell needs to be turned on.
Thanks for the clarification, sorry poor choice of words on my part. I only meant that the data types were the same in the source and destination tables. There are some constraints on the source table that do not exist on the destination table. I did not realize that would cause this error.
So it sounds like my only option now is to use a format file that should work well I was just trying to keep things simple. Thanks for your help!
Here is the definition of the View:
USE [iOPS_TempDB]
GO
/****** Object: View [database2].[dbo].[View3Levels] Script Date: 1/3/2019 4:44:52 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- SQL Script to Creaate Temp Views into iOPS_ChangeLogTemp. This allows for bulk data insert.
CREATE VIEW [database2].[dbo].[View3Levels] AS
SELECT [UserLevels_Level],
[UserLevels_LevelName]
FROM [database2].[dbo].[View3Levels_tbl] ;
GO
Here is the definition of the source table:
USE [database]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[table](
[Level] [int] NOT NULL,
[LevelName] [nvarchar](20) NOT NULL,
CONSTRAINT Обнаружен непредвиденный символ eof в файле данных bcp PRIMARY KEY CLUSTERED
(
[Level] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
Here is the definition of the destination table I changed the database to database2 to reflect what I will be doing in production. I have removed some additional columns for brevity but this gives the idea.
USE [database2]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[View3Levels_tbl](
[ID] [int] IDENTITY(1,1) NOT NULL,
[type] [varchar](1) NULL,
[UserLevels_Level] [int] NULL,
[UserLevels_LevelName] [nvarchar](20) NULL,
PRIMARY KEY CLUSTERED
(
[ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
попытка импорта данных в Azure. Создал текстовый файл в среде Management Studio 2005. Я пробовал текстовый файл с разделителями-запятыми и вкладками.
вот скрипт, который я использовал для создания файла:
Вот таблица, в которую он вставлен в
есть на самом деле несколько сотен тысяч фактических records и я сделали это с другого сервера, единственное различие заключается в версии management studio.
Если файл разделен табуляцией, то флаг командной строки для разделителя столбцов должен быть -t\t -t,
"неожиданный EOF" обычно означает, что столбец или строка Терминатор не то, что вы ожидаете То есть ваши аргументы командной строки для них совпадают с файлом
- Unix против Windows окончания строки
- текстовые данные, содержащие разделитель столбцов (запятая в фактических данных)
- или смесь двух.
SSMS не должны иметь ничего общего с этим: это формат (ожидаемый vs фактический), который имеет значение
просто FYI, что я столкнулся с этой же точной ошибкой, и оказалось, что моя таблица назначения содержит один дополнительный столбец, чем файл DAT!
Я думаю, что большинство из нас предпочитают реальные примеры, чем синтаксические подсказки, поэтому вот что я сделал:
ППГ LoadDB.dbo.тест в C:\temp\test - . txt-S 123.66.108.207 - U testuser-P testpass-c-r /r
мои данные были извлечением из БД Oracle на базе Unix, которая была разделена табуляцией и имела символ конца строки LF.
поскольку мои данные были разделены табуляцией, я не указал параметр a-t, значение по умолчанию BCP-tab.
потому что моя строка Терминатор был символом LineFeed (LF), затем я использовал-r /r
поскольку все мои данные загружались в поля char, я использовал параметр-c
I в каждом случае, когда я столкнулся с этой ошибкой, это заканчивается проблемой, когда количество столбцов в таблице не соответствует количеству столбцов, разделенных в текстовом файле. Простой способ подтвердить это-загрузить текстовый файл в excel и сравнить количество столбцов с количеством столбцов в таблице.
Я поделюсь своим опытом в этом вопросе. Мои пользователи отправляли мне кодировку UTF-8, и все работало нормально. Моя загрузка начала терпеть неудачу, когда они обновили кодировку для кодирования в UCS-2 LE BOM. Используйте notepad++ для проверки этих параметров.
есть ли способ узнать, в какой строке произошла эта ошибка?
Я могу импортировать 10,000,000 строк без проблем, и после этого возникает ошибка
чтобы найти проблемную строку, используйте спецификатор errorfile.
myRubbishData.журнал будет иметь оскорбительные строки и сопутствующий файл myRubbishData.бревно.txt даст вам номера строк и смещения в файл.
пример файла компаньона:
Весело, весело, весело. Я не нашел хорошего способа отладить эти проблемы, поэтому я использую грубую силу. То есть, варианты FirstRow и LastRow очень полезны.
начните с LastRow = 2 и продолжайте пытаться. Загрузите результаты в выбрасываемую таблицу, которую вы можете легко усечь.
и вы также должны иметь в виду, что первая строка может вызвать у вас проблемы.
Если char (10) является Терминатором строк, я не думаю, что вы можете поместить его в кавычки, как вы пытаетесь в BULK INSERT. Однако существует недокументированный способ указать на это:
у меня есть файл csv, который я импортирую с помощью Bulk
обычно я использовал этот скрипт, и у него нет проблем, но в редких случаях.
я сталкиваюсь с этой ошибкой..
"поставщик OLE DB "BULK" для связанного сервера" (null) " сообщил об ошибке. Провайдер не предоставил никакой информации об ошибке."
обычно это происходит, когда последняя строка имеет пустые значения(null).
вам нужно связать ваш csv-файл в MS access db с проверьте данные.. (Если ваш csv не более 1,4 миллиона строк, вы можете открыть его в excel)
поскольку мои данные составляют около 3 миллионов строк, мне нужно использовать Access db.
затем проверьте номер последней строки с пробелами и вычитайте количество нулевых строк в общие строки для csv.
Если у вас есть 2 пустые строки в конце и общее количество строк составляет 30000005 Сценарий станет таким..
Итак, вам нужно сделать следующее:
- проверяем, что в конце файла есть терминатор строк. Если нет, положите один и попробуйте еще раз. Также убедитесь, что последняя строка содержит все необходимые поля. Это говорит "ЭОФ", тогда это ваша проблема.
- вы уверены, что в конце каждой строки есть LF? Попробуйте CR (\n, 0x0D) и посмотрите, работает ли это.
- все еще не работает? Попробуйте установить LASTROW=2 и повторите попытку. Затем попробуйте LASTROW=3. Если в файле больше трех строк и этот шаг завершается ошибкой, то Терминатор строк не является рабочий.
Я столкнулся с такой же проблемой. Я написал сценарий оболочки для создания .csv в Linux. Я взял это .csv в Windows и попытался массово загрузить данные. Это не "вроде" запятыми. Не спрашивайте меня, почему, но я перешел на * как разделитель в массовом импорте и выполнил поиск и замену запятой на * в моем .csv .. это сработало.. Я перешел на A ~ как разделитель, это сработало. tab также работал - ему не нравилась запятая. Надеюсь, это кому-то поможет.
по моему опыту это почти всегда вызвано чем-то в последних двух строках. tail файл импорта, и он все равно должен дать вам сбой. Затем откройте его в полнотекстовом редакторе, который позволяет видеть непечатаемые символы, такие как CR, LF и EOF. Это должно позволить вам заставить его работать, даже если вы не знаете почему. Е. Г., массовая вставка завершается с Терминатором строки в последней строке
Я обошел проблему, преобразовав все поля в строки, а затем используя общий FIELDTERMINATOR. Это сработало:
мой файл данных выглядит так:
второе поле было десятичным типом без разделителя с двойной кавычкой (например , 1470.00) . Форматирование обоих строк устранило ошибку.
Я обошел проблему, если я преобразовал все поля в строку, а затем использовал общий fielddelimiter.
строки генерации этой ошибки нет CHAR(10) Терминатор или есть лишние пробелы
Trying to import data into Azure. Created a text file in Management Studio 2005. I have tried both a comma and tab delimited text file.
Here is the script I used to create the file:
Here is the table it is inserted into
There are actually several hundred thousand actual records and I have done this from a different server, the only difference being the version of management studio.
Читайте также: