Fat32format ошибка процесс не может получить доступ к файлу
ABOUT THE AUTHOR
Position: Columnist
Vicky is a website editor who has been writing tech articles since she was graduated from university. Most of her articles talk about Windows PC and hard disk issues. Some of her articles also touch on YouTube usage and issues.
During her spare time, she likes to spend time reading, watching videos, and sitting on her Yoga mat to relax.
FAT32 Format failed to open device? Go ahead and find solutions here. Also this article will introduce you a perfect alternative to FAT32 Formatter.
By Michael / Last Updated March 16, 2022
Социальные сети
Final Thoughts on Failed to Open Device GetLastError()=32
FAT32 Format is a handy FAT32 format tool. With it, you can format a drive that is larger than 32GB to the FAT32 file system easily. But before formatting a drive using it, make sure that you have closed the files or programs on this drive and then open the tool with admin rights; otherwise, you might receive the error message saying failed to open device GetLastError()=32.
If you still receive the error message, you can try formatting the drive using MiniTool Partition Wizard. It is also a free and handy FAT32 format tool. If you have any questions about this tool, you can contact us via [email protected] , and we will reply to you as soon as possible.
Well, that’s all about the topic of “failed to open device GetLastError()=32”. If you still have doubts about this topic, please leave a comment in the following zone.
↑ Как решить проблему?
1. Unlocker — программа, которая помогает как раз в таких случаях. Она сама находит процессы, которые заняты этим файлом и завершает их. Это можно сделать и без утилиты, только придётся искать в ручную и завершать, а утилита это делает автоматически. Скачав и установив программу, нужно всего лишь нажать ПКМ на файл и выбрать «Unlock»
2. Завершить вручную. Открываем диспетчер задач и разворачиваем список "Подробнее". Из всего большого списка, нужно выбрать только те, которые были запущены Вами. Например, для удаления файла с кэшем браузера, нужно закрыть все задачи браузера. Для этого кликаем правой кнопкой мыши и нажимаем "Завершить задачу".
3. Схитрить с установкой атрибутов. Нажать ПКМ на файл и зайти в свойства. Тут же на вкладке "Общие" поставить галочку напротив поля "Только чтение". Далее перезагрузить компьютер и возможность удаления может появиться.
4. Удалить в безопасном режиме. В безопасном режиме Windows загружает только основные программы нужны для работы системы. Все посторонние остаются отключены, что освобождает файлы от процессов. Для входа в безопасный режим нужно перезагрузить компьютер и во время перезагрузки нажать на клавишу F8 для того, чтобы выбрать вариант запуска системы. На некоторых ПК это может быть другая клавиша. Данный способ довольно часто срабатывает и удалить здесь можно почти любой файл, который не затрагивает работу Windows.
5. Снять защиту на запись. Защита может быть включена как программно, так и механически. Чаще всего это касается SD-карт. На них есть специальный тумблер, который блокирует запись. Программно это выключается через редактор реестра. Для этого нажимаем на Пуск правой кнопкой мыши, выбираем "Выполнить", вводим команду regedit и нажимаем "Ok". Далее нужно найти параметр WriteProtect и установить ему значение 0.
Reasons and solutions to Fat32format failed to open device
There are mainly two reasons that will cause the error. The first one is some file is being used by another process. And the second one is that you do not have the Admin rights when using fat32format. Therefore, to solve this issue, you should close any files before formatting and make sure you have Admin rights when using this tool.
After closing files and programs and run fat32format as administrator, if the issue persists, you can use another tool to format your disk.
Why Does “Format Failed to Open Device GetLastError()=32” Appear?
The error message appears when the tool detects that the files or programs on the drive are being used by other programs.
There is another case. When people do not have admin rights to run the FAT32 Format tool, the tool will also prompt this error message.
Conclusion
If fat32format failed to open device, you can follow the above-mentioned solutions to solve this issue. If the issue exists, do not worry, you can still use AOMEI Partition Assistant to easily solve it.
AOMEI Partition Assistant is not just a disk format tool, it also has many other powerful features like allocate free space from one partition to an another, migrate OS from MBR disk to GPT SSD or HDD, convert primary partition to logical drive and vice versa, etc.
Облако тегов
FAT32 Format Still Not Working, Try Its Alternative
If the error message appears again, you can choose another FAT32 format tool, and MiniTool Partition Wizard could be the best alternative to FAT32 Format. It is a free FAT32 format tool. With it, you can convert a drive larger than 32GB to the FAT32 file system easily.
And compared to the FTA32 Format tool, MiniTool Partition Wizard is more functional. You can use it to format a drive to other file systems like NTFS and exFAT.
How to format a drive to the FAT32 file system using MiniTool Partition Wizard? Several steps are required, and here is the tutorial.
Step 1: Launch MiniTool Partition Wizard to access its main interface.
Step 2: Locate the drive you want to format to FAT32 in the disk map. Then, select it and choose the Format Partition feature from the left panel. Alternatively, right-click the drive and choose the Format option from the context menu.
Step 3: On the Format Partition window, choose the FAT32 option from the File System menu and click the OK button.
Note: Here you can also set the cluster size and even rename the drive by typing a new one into the Partition Label box.
Step 4: Preview the change and then click the Apply button to start formatting the drive to FAT32.
After that, wait for MiniTool Partition Wizard to complete the task. Once it finishes, you get a new FAT32 drive, and it can be used normally.
That’s is how to format a drive to FAT32 using MiniTool Partition Wizard. Actually, with this program, there is another way to convert the file system of the drive to FAT32 if this drive was formatted to NTFS.
MiniTool Partition Wizard allows you to finish the conversion between NTFS and FAT32 without data loss.
- Open MiniTool Partition Wizard.
- Locate and select the NTFS drive that you want to convert to a FAT32 one.
- Choose the Convert NTFS to FAT feature from the left panel.
- Click the Apply button to start the conversion.
Several seconds later, you will get a FAT32 drive and no data disappears from it.
Архив статей
Навигация
Solve Fat32format failed to open device with AOMEI Partition Assistant
As you know, Windows built-in tools cannot support to format partition larger than 32GB to FAT32. To format disk well, it is recommended to use AOMEI Partition Assistant.
AOMEI Partition Assistant Professional is a reliable format tool which can be used to format USB drive, external hard drive, SD card, internal hard drive, etc. This tool is specially designed for Windows 10/8/7/XP/Visa. It supports almost all File Systems including FAT32, NTFS, exFAT, ext3, ext4. With AOMEI Partition Assistant, you can either format disk with command prompt or with GUI.
You can download the demo version to have a try firstly.
Secure Download
Take USB drive as an example. Let’s see how to format USB drive to FAT32 with command prompt.
Step 1. Download AOMEI Partition Assistant, install and run the software.
Step 2. Press Win key + R to bring out the Run dialogue. Type CMD in the Run dialogue and it will open command prompt.
Step 3. In the command window type "cd + installation directory of AOMEI Partition Assistant" to get started (e.g. cd C:\Program Files\AOMEI Partition Assistant Pro Edition 7.0). Then type partassist.exe /list and press Enter.
Step 4. It will skip to the AOMEI Partition Assistant command prompt and list all disks on your computer.
Step 5. Type partassist.exe /list:0 and press Enter. 0 is the disk number you want to list partition on it.
Step 6. To format SD card to FAT32, type the command: partassist.exe /fmt:F /fs:fat32 /label:test and press Enter. It will complete the format in a while.
Format SD card in AOMEI Partition Assistant GUI
You can also format SD card easily with the help of AOMEI Partition Assistant GUI. At the main interface of AOMEI Partition Assistant, right click the disk you want to format and select Format Partition and follow the instruction to complete the format.
Step 1. Open AOMEI Partition Assistant, right-click on the drive you want to format, and click "Format Partition".
Step 2. Select the FAT32 from the listed file system, and click "OK".
Step 3. Click "Apply" on the main interface to commit the change.
Подпишитесь на рассылку
↑ Процесс не может получить доступ к файлу
Все из-за того, что с файлом может одновременно работать лишь одно приложение. В первую очередь это касается элементов системы предназначенных для перезаписи. Когда мы, например, играем в игру и файл с кэшем постоянно подвергнут обработке, система Windows накладывает ограничение. После этого редактировать, заменять, удалять и т.д. его уже не получается ровно до тех пор, пока процесс, который с ним работает, не будет завершён.
Why Use Guiformat?
The guiformat tool (also known as FAT32 Format) is a small FAT32 formal tool with a graphic interface. It is easy to use without installation. Once downloading it, people will get a compressed package and unzip it to get the guiformat.exe file.
Double-clicking the guiformat.exe file directly calls out the FAT32 Format tool. Then to format a drive to the FAT32 file system, people just need to select the drive letter of the drive, then click the Start button, and click the OK button to start formatting. The tool will start formatting the drive, and several seconds later, people will get a formatted FAT32 drive. So, how convenient it is.
Note: People can also customize the allocation unit size and format option (quick format or full format) when using the FAT32 Format tool.
Apart from the convenience the FAT32 Format tool brings, there is another reason for people to choose it.
Windows utilities like Disk Management, Diskpart, and the Format feature in File Explorer only allow users to format a drive that is smaller than 32GB to the FAT32 file system. For example, open File Explorer, right-click the drive that is large than 32GB, and choose the Format option. On the Format window, you will find that the FAT32 file system is unavailable.
However, the FAT32 Format tool breaks the limit — it can format the drive up to 2TB to the FAT32 file system. That’s the second reason why people choose the FAT32 Format tool.
Почему “Процесс не может получить доступ к файлу”?
Одновременно работать с конкретным файлом может только одна программа. Речь идет не о библиотеках общего использования, которые используются только для извлечения данных, а об элементах, предназначенных для перезаписи. Если это кэш-файл игры, здесь содержится пользовательская информация или происходит постоянная обработка данных, и Windows накладывает ограничение. Данные файлы становятся недоступными для удаления или ручного изменения до тех пор, пока мы не завершим процесс, использующий их.
Рекламный блок
Bonus: How to Recover a Formatted FAT32 Drive?
Formatting a drive deletes all files on it. So, it is necessary to transfer your important files from the drive to be formatted to another drive. But, if you forget to do that, do not panic! It is still possible to rescue your important files — as long as these files are not overwritten, you can use a professional data recovery tool to recover them.
MiniTool Partition Wizard is not only a FAT32 format tool but also a powerful FAT32 data recovery tool. With it, you can recover the lost files due to accidental deletion/formatting or virus attacks.
Here are the steps to recover files for a formatted FAT32 drive using MiniTool Partition Wizard:
Step 1: Launch MiniTool Partition Wizard to access its interface.
Step 2: Click the Data Recovery feature in the tool bar at the top of the interface.
Step 3: On the Data Recovery interface, choose the FAT32 drive where you lost your files and double-click it or click the Scan button below.
Note: During the scanning, MiniTool Partition Wizard will list the files it finds. So, you can check whether they are the desired ones using the Preview function.
Step 4: When the scanning finishes, click the checkboxes for your needed files and click the Save button.
Step 5: Choose a different drive to store them, which is to avoid unsaved but important files being overwritten, and click the OK button.
Step 6: Click the View Recovered button on the small window to check the recovered files.
So, if data loss happens, you can try to recover it using MiniTool Partition Wizard.
Quick Navigation :
Apart from the netizen, many people have been stuck in the issue “guiformat failed to open device GetLastEror()=32”. Well, what does the issue mean? And how to fix the issue? Let’s explore it.
Как удалить файл, если процесс не может получить доступ к файлу?
Следуя по логической цепочке, для удаления любого файла, нужно сначала выгрузить его с оперативной памяти и со всех программ. Как только он перестанет использоваться системой в каких-то процессах, элемент сразу станет доступным для удаления.
Главная сложность данного вопроса в том, чтобы найти процесс, использующий конкретный файл. Это не всегда очевидно. Часто бывает, что изображение использует какая-то игра, браузер, торрент, медиапроигрыватель. Если в первую очередь подумать на программу просмотра картинок, вы ошибетесь. Нужно смотреть куда глубже.
Как можно решить проблему «процесс не может получить доступ к файлу»:
- Unlocker – специальная программа, созданная как раз для подобных ситуаций. Она автоматически обнаруживает связанные с файлом процессы и завершает их. По сути она делает то же самое, что нужно выполнять вручную, но только в автоматическом режиме. Она имеет минимальный размер и проверена во многих системах, поэтому точно не заражена вирусами. После скачивания и установки, нужно нажать правой кнопкой мыши по файлу и выбрать «Unlock».
- Завершить связанные процессы. Обычно вполне реально догадаться, какая именно задача использует файл. Для этого нужно открыть Ctrl + Shift + Esc и развернуть список «Подробнее». Здесь будет довольно много процессов, но большинство из них системные, нужно найти те, которые были запущены пользователем. Чтобы удалить файл кэша Google Chrome, нужно закрыть все задачи Google. Для их завершения нужно нажать правой кнопкой мыши и выбрать «Снять задачу».
- Установить правильные атрибуты. К каждому файлу можно установить подходящие привилегии. Нужно нажать правой кнопкой мыши по файлу и на вкладке «Общие» установить пункт «Только чтение». После перезагрузки компьютера возможность удаления может появиться.
- Удаление в безопасном режиме. Очень часто это срабатывает, так как при данном способе запуска система не загружает все посторонние программы. Нужно кликнуть на перезапуск ПК и в момент пуска нажать клавишу F8 (может быть другая) для выбора варианта запуска. В безопасном режиме удалить можно практически любой файл.
- Снять защиту диска на запись. Она может быть установлена на программном и физическом уровне. Первым делом нужно посмотреть на накопителе (обычно это флешка), нет ли здесь специального тумблера. Рядом должна быть соответствующая пометка. В системе в редакторе реестра также следует найти параметр WriteProtect и установить ему значение 0.
Точно такая же самая ошибка «процесс не может получить доступ к файлу» может появиться при запуске команды netsh или при выполнении настройки сайта IIS. В таком случае проблема может быть вызвана недостатком прав для выполнения действия, попытке подключения к занятым портам 80 и 443 или некорректной настройкой реестра.
Lots of people choose to format their SD cards using guiformat.exe. It is helpful, but sometimes it prompts the error message saying failed to open device GetLastError()=32; the process cannot access the file because it is being used by another process. What to do when receiving the error message? Follow the tutorial from MiniTool to learn more about the issue.
Разделы сайта
Комментарии (166)
↑ Как же всё-таки удалить файл в ситуации, когда у процесса не получается обрести доступ?
Файл, который занят другим процессом будет загружен в оперативную память или открыт приложением. Зачастую хватает убрать его из оперативки и всех приложений. Файл перестанет использоваться каким-то процессом и его сразу можно будет отредактировать или удалить.
Чаще всего, проблема заключается в том, чтобы найти этот самый процесс, который использует определённый файл. Использовать ваш файл может какое угодно приложение. Если это, допустим, картинка, вы закрыли программу просмотра картинок и у вас получается удалить это изображение, то считайте вам повезло. Если же нет, то, возможно, придется лезть куда глубже.
Scenario
“I use FAT32 Format to format my USB drive, everything goes well first until I receive an error message which says: “failed to open device”. I don’t know what wrong it is. Can someone tell me how could this happen and how to format USB larger than 32GB? Any advice or idea would be appreciated”.
FAT32 Format (stylized as fat32format as written on the command line) is a disk formatting utility designed to format discs larger than 32 GB with the venerable FAT32 file system. According to some users, formatting disk with the command line fat32format but receive “failed to open device’ only.
How Fix “Format Failed to Open Device GetLastError()=32”?
So, to get rid of the error message, you just need to close the files or programs on the drive to be formatted and then open the tool with admin rights to make it functional again. For that, here is how to do:
Firstly, close files and programs:
Here are many ways to close the files and programs in use.
Obviously, you can click the X icon at the top right corner of the program.
Or disable the related startup programs and then reboot your computer. For that, you need to:
- Go to Windows Settings.
- Click the Apps setting.
- Switch to the Startup tab on the left side of the window.
- Scroll down the list under Startup to check whether a program on the drive to be formatted is set to start when you log in.
- Toggle off its bar to disable its startup.
- Close the Settings window and other programs or documents.
- Click the Windows icon on the taskbar, then click the power icon, and choose the Restart option.
You can also use Task Manager. Right-click the taskbar on your desktop and choose the Task Manager option, then locate and select the related program under the Processes tab, and click the End task button.
Then, run the guiformat.exe file with admin rights:
Locate the guiformat.exe file on your computer or the guiformat icon on your desktop, then right-click it, and choose the Run as administrator option.
Now the FAT32 Format tool opens, and you can try using it to format the drive to FAT32 again. Does the error message pop up again?
Note: Before formatting the drive, please make sure that there is no important data on this drive. Otherwise, you will lose it during the formatting process.
Guiformat Failed to Open Device: Why & How to Fix?
Everything seems to go well when using the FAT32 Format tool. But sometimes an error message appears, saying failed to open device GetLastError()=32 when people use the tool to format their SD cards or other drives. And here is the screenshot of the error message.
Why does the error message appear? How to get rid of the error message? Keep reading!
↑ Что делать, когда такая же проблема настигла в консоли или IIS?
Часто такая же проблема, когда процесс не может получить доступ, может выскочить при выполнении команды netsh в командной строке или при настройке сайта IIS. Тут может быть несколько причин:
1. Неправильная настройка реестра.
2. Попытка подключения к портам 80 и 443, когда они заняты.
3. Не хватает прав для выполнения действия.
А решить проблему можно так:
1. Запустить cmd от имени администратора. Сделать это можно в меню Пуск с помощью правой кнопки мыши.
2. Поменять пул IP-адресов. Выполнить команду netsh int ipv4 set dynamicport tcp start=10000 num=1000. Затем такую netsh int ipv4 set dynamicport udp start=10000 num=1000.
3. Удалить конфликт портов. От имени администратора запустить командную строку, прописать netstat -ano и посмотреть не заняты ли порты 80 и 443. Если порты свободны, то идём в реестр по пути:
Здравствуйте админ, проблема такая, пошёл к приятелю чинить операционную систему, она у него жутко зависала, взял с собой флешку с антивирусной программой, придя, подсоединил "флеху" к USB-порту его ноутбука, но ничего не произошло, накопитель не появился в окне "Компьютер" и в управлении дисками тоже?!
Windows не может отформатировать F. Проверьте правильность подключения дисковода и диска, убедитесь, что диск не только для чтения, а затем повторите попытку".
Худо бедно приятелю вопрос решил, откатил его ноут к заводским настройкам, затем пришёл домой и стал думать, что делать со своей флешкой. Полез в интернеты за советами, а их много, да ни один не помогает.
Короче, хоть бери флешку и выкидывай! Может на вашем сайте подскажут как форматировать флешку в командной строке правильно, чтобы был результат в моём случае?
Как форматировать флешку в командной строке
Привет друзья! Расскажу про все известные мне команды форматирования флешки в командной строке, но сразу оговорюсь, нашему читателю, в его относительно сложном случае, поможет самая последняя команда описанная в этой статье.
format /fs:NTFS F: /q обозначает, что мы хотим форматировать накопитель имеющий букву ( F: ) в файловую систему NTFS и метка диска /q нам не нужна (что такое метка, объяснено дальше в статье) . Если Вам нужна файловая система FAT32, значит команда будет выглядеть так format /FS:FAT32 F: /q .
Всё, флешка отформатирована.
Вторая команда:
format F: /fs: NTFS /v:Remontcompa обозначает , что мы хотим форматировать накопитель имеющий букву ( F: ) в файловую систему NTFS и метка диска будет такая /v:Remontcompa (метку конечно можете выбрать другую) . Если Вам нужна файловая система FAT32, значит команда будет выглядеть так format F: /fs: FAT32 /v:Remontcompa .
И наконец, третья команда отформатирует вашу флешку при любых ошибках (конечно, если флешка исправна).
format fs=ntfs (или format fs=fat32 , если нужна файловая система fat32. Также можете применить быстрое форматирование командой format fs=NTFS QUICK)
Друзья, если у вас не получится форматировать флешку вышеуказанными способами, то попробуйте программы для низкоуровнего форматирования флешек.
Сейчас обсуждаем
Гость Алекс
Очень жду эту фитчу! Честно из-за ее отсутствия я откатился на 10ку, хотя в 11 много чего нравится,
Grey3
Цитата: Гость Виталий России нужен отечественный VPN. Пользуйтесь Kaspersky VPN - ежемесячно
Гость Алексей
При попытке открыть получившийся ISO в пустой виртуалке, пишет "Fatal: Could not read from the boot
rediffusion
rediffusion
Как будут выглядеть параметры, если ссылаться на уже извлечённый install.wim из .ISO?
RemontCompa — сайт с огромнейшей базой материалов по работе с компьютером и операционной системой Windows. Наш проект создан в 2010 году, мы стояли у истоков современной истории Windows. У нас на сайте вы найдёте материалы по работе с Windows начиная с XP. Мы держим руку на пульсе событий в эволюции Windows, рассказываем о всех важных моментах в жизни операционной системы. Мы стабильно выпускаем мануалы по работе с Windows, делимся советами и секретами. Также у нас содержится множество материалов по аппаратной части работы с компьютером. И мы регулярно публикуем материалы о комплектации ПК, чтобы каждый смог сам собрать свой идеальный компьютер.
Наш сайт – прекрасная находка для тех, кто хочет основательно разобраться в компьютере и Windows, повысить свой уровень пользователя до опытного или профи.
Читайте также: