Как удалить временные файлы capture one
Facebook Если у вас не работает этот способ авторизации, сконвертируйте свой аккаунт по ссылке ВКонтакте Google RAMBLER&Co ID
Авторизуясь в LiveJournal с помощью стороннего сервиса вы принимаете условия Пользовательского соглашения LiveJournal
Куда деваются удаленные файлы?
Куда Capture One Pro 5.0 девает удаленные файлы, упорно не могу найти?
В хелпе написано, что удаляет в системную корзину, при этом там их нет. Весь диск уже перерыла. поможите, плиз
Comments
вообще он сам может показать свой trash folder (чтоб вытащить что-то случайно удалённое например), обычно это (в сессии по-умолчанию) папка в Мои документы>Мои рисунки>capture one и т.п.
ЗюЫю
лучше создавать сессию под конкретные нужды - тогда сразу будет ясно, где что лежит
ну и очистить корзину можно тоже из кэпчура самого
ЗюЗюЫю
5.1 уже вышел, там правда нет никааких изменений с корзиной;-]
Вот я иду в эту папку - а там один файл лежит, Capture One.col50 и все. Никаких удаленных картинок.
Я специально ничего из C1 не удаляю, это проще делать еще до конвертации, но пару раз случайно на del нажимала и привет, файл пропадает куда-то с концами, буквально доставала потом через рековер с флешки. но это ж не метод блин!
ок
во-первых посмотрите в самой С1, в закладке браузера будут и папки Capture, Output, Trash
во-вторых это точно единственная папка мои документы?
в-третьих никто не мешает поискать просто по истемному диску *.ваш_рав_файл_формат (cr2, arw, dng, nef и т.п.)
как-то так
не волнуйтесь
Смотрю во всех закладках, во всех юзерах и конечно же поиском тоже пробовала - иначе бы и не побеспокоила обитателей сообщества :) Реально файлы просто пропадают куда-то.
создайте новую сессию и положите куда сами укажите, тогда не должны пропадать (если вы не удаляете через Shift+Delete)
Значит нажали "Empty trash folder".
Хотя как вариант ещё то, что вы используете время от времени внешние жёсткие диски и фотка на одном из них.
Да, я эту папку нашла и там смотрела - нету.
Поиск по всему компу тоже ничего не дает ((
И если предположить, что я куда-то в настройках перенесла эту корзину случайно - то где найти этот пункт?
скорее всего у вас либо хреновый C1, либо, действительно, случайно сами перенесли папку, ибо она ОБЯЗАНА быть на Юзер - Pictures - Capture One Library - Trash (с поправокй на версию винды и локальный диск).
проще всего организовать обычный виндусовый поиск по всему компу конкретного файла. удалите какой-нибудь ненужный через C1, предварительно запомнив как он зовется и ищите. найдете вместе со всем остальным.
Profile
Latest Month
January 2014 | ||||||
S | M | T | W | T | F | S |
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | |||
5 | 6 | 7 | 8 | 9 | 10 | 11 |
12 | 13 | 14 | 15 | 16 | 17 | 18 |
19 | 20 | 21 | 22 | 23 | 24 | 25 |
26 | 27 | 28 | 29 | 30 | 31 |
Page Summary
Categories
Comments
> Михаил Жванецкий: вы даже культурнее нас - вы знаете ноты.
Вл. Маяковский: я русский бы выучил / только за то, что им / разговаривал Ленин. ну вы поняли о чем я.
Чтобы удалить кэш Capture One в 2022 году, откройте каталог файлов и удалите содержимое папок «Cash», «Каталог без названия», «Originals». Если вы не назначали отдельную папку для хранения кэша и каталогов, их можно найти в разделе по умолчанию. Например, в операционной системе Windows 10 каталог находится в папке «Изображения» на диске С и называется «Capture One Catalog».
В папках также могут содержаться RAW, сохранённые во время импорта файлов. Поскольку они являются копией исходников с других папок, их также стоит удалить при очистке каталога файлов Capture One.
Как найти каталог файлов Capture One?
Если каталог файлов Capture One отсутствует в папке «Изображения» на диске С, либо вы создали его на другом диске и забыли точное местонахождение, запустите программу, перейдите в раздел «Файл» и нажмите на пункт «Проверить каталог или сессию». После этого редактор RAW откроет папку с каталогом и кэшем исходников.
Как убрать удалённые файлы из каталога Capture One 2022?
Чтобы убрать удалённые файлы из каталога Capture One 2022, запустите программу, перейдите в раздел «Файл» и нажмите на пункт «Очистить корзину каталога» в меню редактора. После этого перед вами появится предупреждение: «Вы действительно хотите удалить файлы из корзины?». Нажмите «Ок» и немного подождите. Сначала произойдёт загрузка содержимого каталога, а затем очистка папки.
Также может появиться надпись «Вы хотите удалить Х изображений с вашего диска или просто убрать их из каталога?». Вы можете выбрать любой из вариантов, но для большей безопасности я рекомендую нажать на кнопку «Убрать из каталога», а затем вручную удалить «лишние» файлы.
Полное удаление файлов из каталога также уничтожит все оставшиеся «мусорные записи» из корзины, поэтому не обязательно заходить в редактор, чтобы от них избавиться!
Как удалить кэш Capture One с помощью скрипта?
Чтобы удалить кэш Capture One или удалить файлы из каталога в 2022 году с помощью скрипта, откройте поиск в Windows, введите cmd, затем запустите командную строку от имени администратора. После этого введите следующий код, заменив «Name» на используемое вами имя пользователя, либо полностью изменив путь к каталогу файлов (строку «C:\Users\Name\Pictures\Capture One Catalog\Cache»):
С помощью скрипта вы сможете удалить все файлы, которые не изменялись последние 30 дней. Перед удалением содержимого папок в командной строке будет появляться окно «Вы уверены? Y/N», в котором нужно будет подтвердить ваш выбор (нажать Y).
Если папок будет много, подтверждать удаление придётся довольно часто. Зато скрипт можно записать и использовать в любое время!
Почему нужно удалять кэш Capture One?
Кэш Capture One и содержимое каталога нужно удалять, чтобы очистить пространство на диске. Если этого не делать, общий размер файлов может достигать астрономических значений! Например, превысить 1,8 ТБ за 2 года использования:
P.S. Настолько сильно кэш будет забиваться только в том случае, если вы импортируете файлы в новую папку (например, в каталог снимков). Без копирования исходников в новый раздел размер кэша будет существенно меньше!
Tengyart
Фотограф, гик, ретушёр
Читать ещё:
Выход Canon RF 70-200mm f/4L переносится на 2021 год
Первый взгляд на Adobe Photoshop CC 21.0.0.37 от Tengyart
Что именно интересно? Пакетная обработка по дефолту, на автомате, или как конвертнуть 100 обработанных файлов? Сам давно в капче работаю, лучше для свадеб на мой взгляд нет, пока нет. Хотя еденичные файлы и портфолио делаю в другом конвертере. Кстати сейчас тестирую 4 версию бэтку, интересна, но есть глюки.
Конфигурация компа: | |
Pentium-4 2,8 гГц, RAM 2.25 Гб, АTI RADEON HD 4600 512 Mb ,HDD 320Гб ,160Гб, Aureon 5.1 Windows 7-32, Pinnacle Studio v.15,Avid Studio v.1 |
Фото/видео: | |
Фото: Nikon D 7100 Видео: Panasonic AG-HMC 84ER |
Так, выделяем галочкой те 50 кадров которые хотим выставить и потом в одном кадре выставляем баланс белого, далее жмем "apply this White Balance to the current selection of captures". Эта кнопка находится рядом с авто балансом белого! Правее нее. И таким образом делаем и с контрастом и с яркостью!
Кстати, для этой проги есть настроенные цветовые профиля для цифровых камер от другой фирмы. В принципе у меня есть на Кэнон 350, 20 если нужно могу выложить, попробывать можно!
Конфигурация компа: | |
Atlon64 Windows XP |
Здесь видеоурок на русском по Capture One Pro Основные принципы работы понятны,так же и по пакетной обработке
Конфигурация компа: | |
Pentium 2,8 Ghz 1.00 ГБ ОЗУ ASUS Extreme AX300SE/T HDD 2x 160 гб NEC DVD RW ND-4571A Видак Panasonic NV-SV121 Видео Panasonic GS400GC,Фото Canon350D Windows XP SP2, Pinnacle Studio v.10.7 все по Adobe |
Конфигурация компа: | |
Atlon64 Windows XP |
Конфигурация компа: | |
DualCore Intel Core 2 E8500, Asus P5K, GeForce 8800 GS (384 Мб), HDD 750mb Windows XP SP2 |
Фото/видео: | |
Фото: Canon Mark III |
Прошу помощи сразу по нескольким вопросам, касающимся работы с версией Capture One PRO 4.6.1:
1. Как к группе кадров применить не все, а только часть изменений, которые были внесены в кадр-образец. Например, кадр был поправлен по нескольким параметрам: экспозиция, резкость, контрастность, баланс белого. Но к группе соседних кадров я хочу применить только экспокорекцию и резкость, а остальные параметры к ним не хочу применять. По нажатию на кнопку "Copy Adjustmtnts" и далее на "Apply Adjustmtnts" в группу выделенных кадров СРАЗУ копируются ВСЕ настройки кадра-образца. А в старой версии выскакивало окошко, в котором можно было выбрать (выставить птички), какие изменения я хочу, а какие нет.
2, Удобно, когда часто используемые параметры можно сохранить в пресет, но как настройки записанные в него применить потом не к одному, а к группе кадров? У меня применяются пока только к одному кадру
Offline files in Capture One mean that Capture One no longer knows the physical location of the images that are in a catalog. There can be a couple of different reasons why this happens, but in most cases it’s fast and easy to fix.
Relocating individual images
- Right-click the offline image and choose ‘Locate…’
- Navigate to the correct location of the image and choose ‘Open’.
- The image will be relocated.
Relocating a folder of images
- Find the offline folder. This can be done in two ways:
1) Browse to the folder within the Folders area of the Library Tool. Offline folders are indicated by a warning triangle.
2) Right-click an offline image and choose ‘Show in Library’. The folder containing the image will be highlighted within the Library Tool.
- Right-click the offline folder and choose ‘Locate…’
- Navigate to the correct location of the folder and choose ‘Open’.
- All the images within the folder will be relocated.
Relocating offline drives
If an external hard drive has gone offline, it most often means that it’s simply ejected or sleeping. If reconnecting the drive does not make it come back online within your catalog, even after restarting Capture One, you need to relocate it.
- Right-click the offline drive and choose ‘Locate…’
- Navigate to the correct location of the drive and choose ‘Open’.
- The drive will be relocated.
Why does this happen and how can I avoid it?
When images are added to a Capture One catalog, it will track the location of these, while keeping adjustments and metadata inside the catalog. When images and folders are moved around from within Capture One, the links between the catalog and the images are kept intact, and no issues arise.
If images or folders are moved or renamed using the Finder, Explorer or other applications outside of Capture One, the link breaks!
This introduces images that show as ‘Offline’, because Capture One doesn’t know the physical location of these images anymore. As Capture One uses image previews when working in a Catalog, these offline files can still be edited, and the adjustments will be saved within the Catalog. Offline files cannot be exported until you relocate them, except when using the format ‘JPEG Quickproof’. This format will use the previews for exporting and cannot exceed the resolution of your previews.
The general rule is to try to keep all file operations within Capture One. But if you do unintentionally or otherwise move items outside of Capture One, it’s easy to fix, as shown above.
To get in-depth knowledge on how to master Asset Management in Capture One, we recommend these two webinars:
Share this:
David Grover
David Grover is part of the Capture One team, bringing you help, advice and education on a variety of subjects and platforms. David can be found on most weeks delivering live Capture One Webinars or anytime on our YouTube Channel.
Comments (27)
Very clear explanation, David. Great job!
Yeah, great. Now, what do I do when C1 failes to empty the trash folder because the files are offline for they don’t really exist anymore ?
Hi David,
I miss you a looooot on the you tube channel . I do hope you come back and bring new Capture One features with you
Cheers
Don’t worry! I will be back! 🙂
Great explanation about this subject. I remember jumping through many hoops sorting this out.
Any advice for locating files that have the following message:
‘The selected image is either unavailable, in an unsupported format or corrupted’
I tried to open a previous catalog – location has not been changed, but half of the images had that message!
@Nicu: I used to have that issue as well, but I think it was fixed in a later version of Capture One 10.
How about to mass-locate files in SESSION-mode, collected in an Album? [background: I shifted a session-collector directory 1 level higher, into to drive root]
Up to now I didn’t find any way beyond 1-by-1 path updates, it’s quite cumbersome job….
It shouldn’t really be an issue in the Session. Was the folder added as a favorite?
I traveled with my main C1 file on an ext drive and added photos to that file and drive. At home, I manually moved the new photos to my main drive. I moved my main C1 file back to main computer and disconnected the ext drive. The new photos show Offline. If I then use Locate and point to their new location on the main drive, the C1 DB gets confused. Some other links get moved around,
Seems this technique should work but does not. thanks.
Probably. Yet, the problem reappears in C1 11.2.1
Your explanation is very clear. Thank you for sharing
That does sound a little odd. Please report it to support so we can fix your catalog and look into it.
See support case 304690. Resolved. Not exactly sure what caused this issue but gone now. Thanks
Although relocating individual images or image folders should be part of CO1’s toolbox, I am afraid that there is still the odd (serious) bug making this procedure a risky one.
I store all my raw images on a very fast external SSD, because I use a Macbook pro as well as a Windows 10 pc. I also have the catalogue files on the SSD.
When switching platforms, obviously the SSD drive will be offline due to incompatible naming conventions on MacOS and Windows, but a simple re-locate command should solve this…. NOT!
When importing images into the catalogue on my Macbook pro (referenced), and moving to the Windows pc, the image folder that shoúld contain the newly imported images (and doés on MacOS), will show up empty before ánd after re-locating. So re-locating the folder is not the issue, but the database on Windows does not know that the images are in that particular folder when the images were imported on MacOS.
This effectively destroys the workflow, and I am not sue why this should be a problem, since Lightroom has no problem whatsoever re-locating time after time after time when moving Mac > Windows > Mac > Windows
A serch on your forums shows that this bug dates back several years. Why won’t Phase One fix it? I opened a support case on the matter and sent in several bug reports while testing beta v12. Still, the nasty bug remains!
With a few tweaks, Capture One is a fantastic Lightroom alternative.
…and shrink that enormous Capture One catalog file
One of the most pleasant surprises of going 100% Adobe-free has been the switch to Phase One’s Capture One. It has long been a favorite among pros, but I have to admit that I overlooked it at first after being seduced by the slicker marketing and shinier interfaces of some other self-described Lightroom alternatives. None of those proved to be — or show any real progress towards ever being — a complete replacement for Adobe Lightroom, at least not for many professional photographers.
Capture One Pro 11, on the other hand, is an excellent Adobe Lightroom alternative. Capture One is faster, has more powerful tools (including layers), and does not require a subscription! If only Phase One’s marketing reach matched that of Adobe’s (or Luminar’s for that matter), more photographers might learn that they’ve had a wonderful Lightroom alternative just waiting for them all along.
Update November 29, 2018
I do have one issue, however, with the configuration options of Capture One. Although it is simple enough to import images into Capture One while keeping those big RAW files on my external RAID, the preview and thumbnail images that Capture One creates can only be stored in the catalog file itself, which is actually a macOS package. This is not unlike Apple’s Photos app, and it makes sense for smaller catalogs.
However, the size of the preview files is not trivial. For a large library, the catalog file can reach many gigabytes, even while the database file itself is only a few hundred megabytes. I would much rather store those preview files on the external SSD that I reserve specifically for caches. That way I don’t waste precious space on my internal SSD, and I can exclude that drive from my various backup services. There’s not much point wasting bandwidth and storage space by constantly backing up new preview files that can always be recreated if lost, and, in my particular case, the catalog file size had surpassed the single file size limit for syncing with iCloud Drive, which is a critical part of my workflow.
I was unable to find an answer in the Capture One user forum, but I eventually, and accidentally, stumbled on a solution while testing the Backup Catalog… command. For whatever reason, Capture One creates a standalone database file when exporting a backup and separates out the preview image cache into its own directory.
It occurred to me that this database file was the same type as that found within the contents of the default catalog package, which led to the following 10-step procedure to move the cache to an external drive.
Step-by-step tutorial:
1 Find the location of the Capture One catalog file in the Finder. The default path is Pictures ▸ Capture One Catalog ▸ Capture One Catalog.cocatalog .
2 Right click on the catalog file (extension .cocatalog ), which is actually a package.
3 Select Show Package Contents . This will reveal a .cocatalogdb file, along with various directories, including Cache and possibly Adjustments . You may also see Originals if you have opted to store photos inside the catalog, although that would negate the space savings of storing the preview files in a separate location!
4 Copy the .cocatalogdb file (along with the Adjustments and Originals folders, if they exist) to the directory where you would like to keep your new database file. An easy way to do this is to select the files/directories and press Command-C. Click the back arrow in the top left corner of the Finder window to exit the package. If you want to keep your new catalog database file in the same directory as the original catalog package, just press Command-V to paste right there, or navigate to another location and paste the files there. Personally, I choose to store my Capture One Catalog in a directory that syncs with iCloud.
5 Copy just the Cache directory to the drive where you want to store all of your preview images. In my case, I keep the cache in a folder named Capture One on an external SSD.
6 Delete the Cache directory that you just copied (the one in the same folder as the .cocatalogdb file).
7 Here’s where the magic happens. Use the Terminal to create a symbolic link, also known as a symlink or soft link, in the location of the Cache folder you just deleted. This symlink will point to your external cache in a way that is transparent to Capture One. To do this, enter the following at the command line prompt, replacing the first path with the location of your external cache directory and the second path with the original location. Note the backslash escape characters before the spaces.
ln -s /Volumes/My\ External\ Drive/Capture One/Cache /Users/username/Pictures/Capture\ One\ Catalog/Cache
Hint: You can drag a directory from the Finder into the Terminal window to paste in the path.
8 Double-click your new, nice and slim .cocatalogdb file to launch Capture One. Et voila! Your catalog should load exactly as before.
9 If everything is cool (and all photos are backed up as always!), you can delete the original, bulky .cocatalog file.
10 I can’t end at step 9! So go take some pictures!
How to move your Capture One preview cache to an external drive in macOS posted by Dax Roggio on October 29, 2018
Читайте также: