Как прошить hp designjet 500 plus
КОНФЕРЕНЦИЯ СТАРТКОПИ
Принтеры, копировальные аппараты, МФУ, факсы и другая офисная техника:
вопросы ремонта, обслуживания, заправки, выбора
0. Mai_kl 15.02.19 13:35
Всем здравствуйте. Проблема с новой прошивкой A05.01 для HP DesignJet 500. Скачиваю прошивку с официального сайта производителя, разархивирую, запускаю "HP DesignJet 500-800 Firmware Upgrade Tool", прошивка запускается, аппарат она видит, говорит что прошивка отправлена на устройство, следуйте указаниям на экране принтера, но с аппаратом при этом ни чего не происходит, просто стоит в готовности, установки прошивки не происходит, при этом аппарат легко принимает предыдущую версию прошивки A4.02. Как с этим бороться, что не так? Такое происходило на двух аппаратах, менял USB кабели, пробовал прошить с другого компа - результат один, не прошивается. Перепрошить необходимо, т.к. аппарат не работает с новыми головками.
1. Scuzzy 15.02.19 13:46
Что ответил вам саппорт НР по вашему обращению?
2. Mai_kl 15.02.19 13:55
В саппорт не писал
3. Scuzzy 15.02.19 14:02
Неверный алгоритм действий.
4. CBuH 15.02.19 14:04
Плоттер по сети раздайте.
5. Mai_kl 15.02.19 14:08
Делал так как написано в руководстве
6. Mai_kl 15.02.19 14:09
Плоттер в общем доступе, если не открыт общий доступ, прошивка об этом напишет
7. Scuzzy 15.02.19 14:11
Mai_kl (5): Делал так как написано в руководстве
Это в каком же руководстве и на какой странице написано ". если ни то-то, ни то-то не получается - ни в коем случае не обращайтесь в саппорт НР! Срочно создавайте тему в конференции Старткопи!"?)))
8. Mai_kl 15.02.19 14:14
Вы сказали про неверный алгоритм действий, я ответил.
9. Scuzzy 15.02.19 14:16
(8) Потому я и задал вопрос (7). Ответ будет или все свободны?
10. Mai_kl 15.02.19 14:26
Если вы знаете решение проблемы и хотите помочь - помогите, если нет - то что вы делаете в данной теме, вон из неё, незачем тут флудить.
11. Scuzzy 15.02.19 14:32
Mai_kl (10): Если вы знаете решение проблемы и хотите помочь - помогите
Уже, наверное, не хочу: два раза попробовал, но вы так и не поняли даже примерно. Сорри, больше времени и желания не имею. (ака "бисер кончился").
Mai_kl (10): вон из неё
Вас забыл спросить. Хамов тут не любят, к вашему сведению.
12. Виталий 15.02.19 22:31
Попробуйте подключить принтер через LPT.
13. Mai_kl 18.02.19 08:33
Да, но в руководстве написано что он шьётся только по USB
14. Mai_kl 18.02.19 16:38
Если кому интересно, проблема решена. Решение такое (пример для Windows XP): Заходим в Диспетчер устройств, находим "Контроллер универсальной последовательной шины USB", щёлкаем по нему два раза, находим "Поддержка USB принтера", жмём по нему правой клавишей, находим "Обновить драйвер", появляется "Мастер обновления оборудования", выбираем "Установка из указанного места" и жмём "Далее", выбираем "Не выполнять поиск. Я сам выберу нужный драйвер", опять жмём "Далее", в появившемся окне выбираем
"Поддержка USB принтера" и нажимаем "Далее", после этого идёт обновление и появляется новое окно, в нём жмём "готово". Теперь можно прошивать аппарат, прошивка залилась без проблем. Зашёл в меню аппарата, проверил, прошивка изменилась на A05.01
15. SoftFelix 23.04.19 14:17
Та же самая проблема - не хочет принимать ошибку. Плоттер - C7770F (42). Сейчас А.03.06. Пробовал из Windows 7 Ultimate x64 и Windows XP SP3 x86. Прошивальщик видит плоттер, но вылезает "In order to continue with upgrade the printer <> must be shared". Нажимаю ОК в этом окне, оно исчезает и на этом всё. Пробовал вариант с перестановкой драйвера Поддержка USB принтера, и, естественно, это не помогло. Такое впечатление, что в аппарате стоит lock на прошивку. В общем, подскажите, как его победить. Чёрная голова требует замены, а новые купленные головы требуют новую FW.
16. Scuzzy 23.04.19 16:17
(15) Прекратите плодить клонов и сделайте уже то, что указывает вам аппарат.
Принтеры, копировальные аппараты, МФУ, факсы и другая офисная техника:
вопросы ремонта, обслуживания, заправки, выбора
Переход в графическую версию
The System Maintenance utility keeps HP Designjet 500 and 800 series printers up to date with the latest system software (firmware).
Updating an HP Designjet 500 or 800 series printer
If this utility is running on Windows or Mac OS, follow the instructions under the "System Maintenance utility" section to update the printer's system software.
If the System Maintenance utility fails to update the printer's system software, or to upgrade the printer from any other operating system (such a UNIX or DOS), see the "Other Operating Systems" section below.
Downloading the System Maintenance utility
Ensure that all of the printer(s) requiring the update are turned on. Also, ensure that the computer running the System Maintenance utility has the appropraite driver installed and the proper connection selected.
If the driver or connection is not available, the tool will not find the printer to perform the update.
When the download is complete, click Open when prompted. Ensure the language selection is correct and click OK . All necessary files will be installed. The application will then analyze each of the printers that are configured for the computer and report on its current state.
If any of the printers are out of date, the application will prompt an update. The update process sends a special file to the printer.
Once the update is complete, a descriptive drawing showing the printer being unplugged will be displayed on the front panel. When this picture is displayed, unplug the printer. Wait 30 seconds, and plug it back in. This will delete all pending print jobs; therefore, do not print during the upgrade process.
The update process may take several minutes. Do not turn the printer off before the drawing showing the printer being unplugged appears on the front panel display. If there are any problems during the upgrade, or if the upgrade does not work, it may be necessary to upgrade using the "Other Operating Systems" section below.
Once the printer is upgraded, the new firmware revisions should report on the front panel. To view and confirm the firmware revisions, do the following:
Using the Arrow keys, scroll down to view the printer's current firmware revisions. The current firmware revisions may include the following:
Formatter F/W: A.02.xx (only in the HP Designjet 800 series and HP Designjet 500 with HP-GL/2 accessory card)
Troubleshooting
Cannot find the printer
The printer must be configured to print from the computer that is running the System Maintenance Utility. If the printer receives prints but does not appear in the list, select All Printers in the View menu. If it still fails to appear, perhaps the printer is not turned on or cannot be contacted. Try printing a simple page to see if the computer can connect to the printer.
If the printer is not found, select File , then New from the menu bar and enter the IP address. Continue the upgrade as above.
If the printer is connected via an external HP Jetdirect box it will be necessary to connect directly via parallel cable and choose System Emergency from the menu bar. Continue the upgrade as listed above.
Restoring the old revision of firmware
If the behavior of the printer is less preferred than before it was upgraded, it is possible to downgrade the printer by selecting Downgrade in the Version menu. A prompt will allow a choice from a list of previous firmware versions.
Other operating systems
If the System Maintenance Utility has been downloaded correctly from www.hp.com, but problems arise while upgrading printer firmware via the System Maintenance utility, another download is not necessary. The files can be found in the default directory located in C:\Program Files\Hewlett-Packard\HP Designjet system maintenance. Proceed to the "Upgrade Process" section.
If the operating system is any other operating system (such as UNIX or DOS), perform the next two steps, then proceed with the "Upgrade Process" section.
Open the folder when prompted, once the download is complete. Ensure the language is set to English and click OK . All necessary files will be installed.
Upgrade process
If the System Maintenance Utility is unable to successfully upgrade firmware to a printer, send the files by connecting the printer to a PC through the parallel port.
Type cd HP Designjet System Maintenance , then press Enter . The location should now be C:\Program Files\Hewlett-Packard\HP Designjet system maintenance.
HP Designjet 500 series
From the above location, type copy DJ500HPGL_Axxxx.FMW LPT1 , then press Enter to send the formatter code image (the "xxxx" refers to the most current firmware revision). The formatter code image should be sent only if the printer has the HPGL/2 accessory card installed. The printer's front panel will display FMTUPGRADE (or similar) in the Job Management menu. Once the upgrade is done, the printer will return to a Ready state.
If experiencing problems copying the file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ500HPGL_Axxxx.FMW LPT1).
Type copy DJ500_Axxxx.FMW LPT1 , then press Enter to send the engine code image. An image of the printer, with an arrow pointing to the control panel, along with a column of scrolling zeros and ones, will be displayed on the front panel display for a short period of time. Then, an image of an hourglass, followed by an image of the printer showing a power cord, and an arrow pointing away from the wall, will be displayed.
If experiencing problems copying the engine code image file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ500_Axxxx.FMW LPT1).
Remove the power cord from the back of the printer. Do not turn the power off with the power switch. Wait 30 seconds.
HP Designjet 800 series
From C:\Program Files\Hewlett-Packard\HP Designjet system Maintenance, type copy DJ800DISK_Axxxx.FMW LPT1 , then press Enter to send the hard disk image (the "xxxx" refers to the most current firmware revision). The printer front panel will display Upgrading to… (or similar). Once the upgrade of the hard disk image is complete the printer will display a message other than Upgrading to… (message will vary due to the printer's current state).
If experiencing problems copying the file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ800DISK_Axxxx.FMW LPT1).
Type copy DJ800PS_Axxxx.FMW LPT1 , and then press Enter to send the formatter code image. The printer's front panel will display FMTUPGRADE (or similar) in the Job Management menu. Once the upgrade is done, the printer will display a message other than FMTUPGRADE (message will vary due to the printer's current state).
If experiencing problems copying the file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ800PS_Axxxx.FMW LPT1).
Type copy DJ500_Axxxx.FMW LPT1 , then press Enter to send the engine code image. An image of the printer, with an arrow pointing to the control panel, along with a column of scrolling zeros and ones will be displayed on the front panel display for a short period of time. Then, an image of an hourglass, followed by an image of the printer showing a power cord, and an arrow pointing away from the wall, will be displayed.
If experiencing problems copying the engine code image file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ500_Axxxx.FMW LPT1).
Remove the power cord from the back of the printer. Do not turn the power off with the power switch. Wait 30 seconds.
The System Maintenance utility keeps HP Designjet 500 and 800 series printers up to date with the latest system software (firmware).
Updating an HP Designjet 500 or 800 series printer
If this utility is running on Windows or Mac OS, follow the instructions under the "System Maintenance utility" section to update the printer's system software.
If the System Maintenance utility fails to update the printer's system software, or to upgrade the printer from any other operating system (such a UNIX or DOS), see the "Other Operating Systems" section below.
Downloading the System Maintenance utility
Ensure that all of the printer(s) requiring the update are turned on. Also, ensure that the computer running the System Maintenance utility has the appropraite driver installed and the proper connection selected.
If the driver or connection is not available, the tool will not find the printer to perform the update.
When the download is complete, click Open when prompted. Ensure the language selection is correct and click OK . All necessary files will be installed. The application will then analyze each of the printers that are configured for the computer and report on its current state.
If any of the printers are out of date, the application will prompt an update. The update process sends a special file to the printer.
Once the update is complete, a descriptive drawing showing the printer being unplugged will be displayed on the front panel. When this picture is displayed, unplug the printer. Wait 30 seconds, and plug it back in. This will delete all pending print jobs; therefore, do not print during the upgrade process.
The update process may take several minutes. Do not turn the printer off before the drawing showing the printer being unplugged appears on the front panel display. If there are any problems during the upgrade, or if the upgrade does not work, it may be necessary to upgrade using the "Other Operating Systems" section below.
Once the printer is upgraded, the new firmware revisions should report on the front panel. To view and confirm the firmware revisions, do the following:
Using the Arrow keys, scroll down to view the printer's current firmware revisions. The current firmware revisions may include the following:
Formatter F/W: A.02.xx (only in the HP Designjet 800 series and HP Designjet 500 with HP-GL/2 accessory card)
Troubleshooting
Cannot find the printer
The printer must be configured to print from the computer that is running the System Maintenance Utility. If the printer receives prints but does not appear in the list, select All Printers in the View menu. If it still fails to appear, perhaps the printer is not turned on or cannot be contacted. Try printing a simple page to see if the computer can connect to the printer.
If the printer is not found, select File , then New from the menu bar and enter the IP address. Continue the upgrade as above.
If the printer is connected via an external HP Jetdirect box it will be necessary to connect directly via parallel cable and choose System Emergency from the menu bar. Continue the upgrade as listed above.
Restoring the old revision of firmware
If the behavior of the printer is less preferred than before it was upgraded, it is possible to downgrade the printer by selecting Downgrade in the Version menu. A prompt will allow a choice from a list of previous firmware versions.
Other operating systems
If the System Maintenance Utility has been downloaded correctly from www.hp.com, but problems arise while upgrading printer firmware via the System Maintenance utility, another download is not necessary. The files can be found in the default directory located in C:\Program Files\Hewlett-Packard\HP Designjet system maintenance. Proceed to the "Upgrade Process" section.
If the operating system is any other operating system (such as UNIX or DOS), perform the next two steps, then proceed with the "Upgrade Process" section.
Open the folder when prompted, once the download is complete. Ensure the language is set to English and click OK . All necessary files will be installed.
Upgrade process
If the System Maintenance Utility is unable to successfully upgrade firmware to a printer, send the files by connecting the printer to a PC through the parallel port.
Type cd HP Designjet System Maintenance , then press Enter . The location should now be C:\Program Files\Hewlett-Packard\HP Designjet system maintenance.
HP Designjet 500 series
From the above location, type copy DJ500HPGL_Axxxx.FMW LPT1 , then press Enter to send the formatter code image (the "xxxx" refers to the most current firmware revision). The formatter code image should be sent only if the printer has the HPGL/2 accessory card installed. The printer's front panel will display FMTUPGRADE (or similar) in the Job Management menu. Once the upgrade is done, the printer will return to a Ready state.
If experiencing problems copying the file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ500HPGL_Axxxx.FMW LPT1).
Type copy DJ500_Axxxx.FMW LPT1 , then press Enter to send the engine code image. An image of the printer, with an arrow pointing to the control panel, along with a column of scrolling zeros and ones, will be displayed on the front panel display for a short period of time. Then, an image of an hourglass, followed by an image of the printer showing a power cord, and an arrow pointing away from the wall, will be displayed.
If experiencing problems copying the engine code image file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ500_Axxxx.FMW LPT1).
Remove the power cord from the back of the printer. Do not turn the power off with the power switch. Wait 30 seconds.
HP Designjet 800 series
From C:\Program Files\Hewlett-Packard\HP Designjet system Maintenance, type copy DJ800DISK_Axxxx.FMW LPT1 , then press Enter to send the hard disk image (the "xxxx" refers to the most current firmware revision). The printer front panel will display Upgrading to… (or similar). Once the upgrade of the hard disk image is complete the printer will display a message other than Upgrading to… (message will vary due to the printer's current state).
If experiencing problems copying the file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ800DISK_Axxxx.FMW LPT1).
Type copy DJ800PS_Axxxx.FMW LPT1 , and then press Enter to send the formatter code image. The printer's front panel will display FMTUPGRADE (or similar) in the Job Management menu. Once the upgrade is done, the printer will display a message other than FMTUPGRADE (message will vary due to the printer's current state).
If experiencing problems copying the file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ800PS_Axxxx.FMW LPT1).
Type copy DJ500_Axxxx.FMW LPT1 , then press Enter to send the engine code image. An image of the printer, with an arrow pointing to the control panel, along with a column of scrolling zeros and ones will be displayed on the front panel display for a short period of time. Then, an image of an hourglass, followed by an image of the printer showing a power cord, and an arrow pointing away from the wall, will be displayed.
If experiencing problems copying the engine code image file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ500_Axxxx.FMW LPT1).
Remove the power cord from the back of the printer. Do not turn the power off with the power switch. Wait 30 seconds.
КОНФЕРЕНЦИЯ СТАРТКОПИ
Принтеры, копировальные аппараты, МФУ, факсы и другая офисная техника:
вопросы ремонта, обслуживания, заправки, выбора
0. SoftFelix 23.04.19 14:25
Проблема с новой прошивкой A05.01 для HP DesignJet 500. Скачиваю прошивку с официального сайта производителя, разархивирую, запускаю "HP DesignJet 500-800 Firmware Upgrade Tool", прошивка запускается, аппарат она видит, говорит что прошивка отправлена на устройство, следуйте указаниям на экране принтера, но с аппаратом при этом ни чего не происходит, просто стоит в готовности, установки прошивки не происходит, при этом аппарат легко принимает предыдущую версию прошивки A4.02. Как с этим бороться, что не так? Такое происходило на двух аппаратах, менял USB кабели, пробовал прошить с другого компа - результат один, не прошивается. Перепрошить необходимо, т.к. аппарат не работает с новыми головками.
Если кому интересно, проблема решена. Решение такое (пример для Windows XP): Заходим в Диспетчер устройств, находим "Контроллер универсальной последовательной шины USB", щёлкаем по нему два раза, находим "Поддержка USB принтера", жмём по нему правой клавишей, находим "Обновить драйвер", появляется "Мастер обновления оборудования", выбираем "Установка из указанного места" и жмём "Далее", выбираем "Не выполнять поиск. Я сам выберу нужный драйвер", опять жмём "Далее", в появившемся окне выбираем
"Поддержка USB принтера" и нажимаем "Далее", после этого идёт обновление и появляется новое окно, в нём жмём "готово". Теперь можно прошивать аппарат, прошивка залилась без проблем. Зашёл в меню аппарата, проверил, прошивка изменилась на A05.01
Та же самая проблема - не хочет принимать прошивку. Плоттер - C7770F (42'). Сейчас А.03.06. Пробовал из Windows 7 Ultimate x64 и Windows XP SP3 x86. Прошивальщик видит плоттер, но вылезает "In order to continue with upgrade the printer <> must be shared". Нажимаю ОК в этом окне, оно исчезает и на этом всё. Пробовал вариант с перестановкой драйвера Поддержка USB принтера, и, естественно, это не помогло. Такое впечатление, что в аппарате стоит lock на прошивку. В общем, подскажите, как его победить. Чёрная голова требует замены, а новые купленные головы требуют новую FW.
1. Nemetz 23.04.19 15:06
SoftFelix (0): must be shared. Общий доступ к принтеру откройте.
2. Кайра 25.04.19 11:13
Таже проблема, доступ открыт, но ничего не происходит.
Принтер продолжает стоять в состоянии готовности к печати и все
3. SoftFelix 06.05.19 23:30
Расшарил плоттер и всё прошилось с первого раза. После прошивки изображение на дисплее плоттера подсказывает, что нужно вытащить шнур питания из аппарата и вставить его потом обратно. Нужно сделать именно так, а не пытаться выключить плоттер кнопкой питания. После прошивки плоттер заработал со старой чёрной печатающей головкой, с которой на предыдущей прошивке (3.06) был заблокирован. Т.е. даже не потребовалась установка нового комплекта головок.
Принтеры, копировальные аппараты, МФУ, факсы и другая офисная техника:
вопросы ремонта, обслуживания, заправки, выбора
Переход в графическую версию
The System Maintenance utility keeps HP Designjet 500 and 800 series printers up to date with the latest system software (firmware).
Updating an HP Designjet 500 or 800 series printer
If this utility is running on Windows or Mac OS, follow the instructions under the "System Maintenance utility" section to update the printer's system software.
If the System Maintenance utility fails to update the printer's system software, or to upgrade the printer from any other operating system (such a UNIX or DOS), see the "Other Operating Systems" section below.
Downloading the System Maintenance utility
Ensure that all of the printer(s) requiring the update are turned on. Also, ensure that the computer running the System Maintenance utility has the appropraite driver installed and the proper connection selected.
If the driver or connection is not available, the tool will not find the printer to perform the update.
When the download is complete, click Open when prompted. Ensure the language selection is correct and click OK . All necessary files will be installed. The application will then analyze each of the printers that are configured for the computer and report on its current state.
If any of the printers are out of date, the application will prompt an update. The update process sends a special file to the printer.
Once the update is complete, a descriptive drawing showing the printer being unplugged will be displayed on the front panel. When this picture is displayed, unplug the printer. Wait 30 seconds, and plug it back in. This will delete all pending print jobs; therefore, do not print during the upgrade process.
The update process may take several minutes. Do not turn the printer off before the drawing showing the printer being unplugged appears on the front panel display. If there are any problems during the upgrade, or if the upgrade does not work, it may be necessary to upgrade using the "Other Operating Systems" section below.
Once the printer is upgraded, the new firmware revisions should report on the front panel. To view and confirm the firmware revisions, do the following:
Using the Arrow keys, scroll down to view the printer's current firmware revisions. The current firmware revisions may include the following:
Formatter F/W: A.02.xx (only in the HP Designjet 800 series and HP Designjet 500 with HP-GL/2 accessory card)
Troubleshooting
Cannot find the printer
The printer must be configured to print from the computer that is running the System Maintenance Utility. If the printer receives prints but does not appear in the list, select All Printers in the View menu. If it still fails to appear, perhaps the printer is not turned on or cannot be contacted. Try printing a simple page to see if the computer can connect to the printer.
If the printer is not found, select File , then New from the menu bar and enter the IP address. Continue the upgrade as above.
If the printer is connected via an external HP Jetdirect box it will be necessary to connect directly via parallel cable and choose System Emergency from the menu bar. Continue the upgrade as listed above.
Restoring the old revision of firmware
If the behavior of the printer is less preferred than before it was upgraded, it is possible to downgrade the printer by selecting Downgrade in the Version menu. A prompt will allow a choice from a list of previous firmware versions.
Other operating systems
If the System Maintenance Utility has been downloaded correctly from www.hp.com, but problems arise while upgrading printer firmware via the System Maintenance utility, another download is not necessary. The files can be found in the default directory located in C:\Program Files\Hewlett-Packard\HP Designjet system maintenance. Proceed to the "Upgrade Process" section.
If the operating system is any other operating system (such as UNIX or DOS), perform the next two steps, then proceed with the "Upgrade Process" section.
Open the folder when prompted, once the download is complete. Ensure the language is set to English and click OK . All necessary files will be installed.
Upgrade process
If the System Maintenance Utility is unable to successfully upgrade firmware to a printer, send the files by connecting the printer to a PC through the parallel port.
Type cd HP Designjet System Maintenance , then press Enter . The location should now be C:\Program Files\Hewlett-Packard\HP Designjet system maintenance.
HP Designjet 500 series
From the above location, type copy DJ500HPGL_Axxxx.FMW LPT1 , then press Enter to send the formatter code image (the "xxxx" refers to the most current firmware revision). The formatter code image should be sent only if the printer has the HPGL/2 accessory card installed. The printer's front panel will display FMTUPGRADE (or similar) in the Job Management menu. Once the upgrade is done, the printer will return to a Ready state.
If experiencing problems copying the file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ500HPGL_Axxxx.FMW LPT1).
Type copy DJ500_Axxxx.FMW LPT1 , then press Enter to send the engine code image. An image of the printer, with an arrow pointing to the control panel, along with a column of scrolling zeros and ones, will be displayed on the front panel display for a short period of time. Then, an image of an hourglass, followed by an image of the printer showing a power cord, and an arrow pointing away from the wall, will be displayed.
If experiencing problems copying the engine code image file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ500_Axxxx.FMW LPT1).
Remove the power cord from the back of the printer. Do not turn the power off with the power switch. Wait 30 seconds.
HP Designjet 800 series
From C:\Program Files\Hewlett-Packard\HP Designjet system Maintenance, type copy DJ800DISK_Axxxx.FMW LPT1 , then press Enter to send the hard disk image (the "xxxx" refers to the most current firmware revision). The printer front panel will display Upgrading to… (or similar). Once the upgrade of the hard disk image is complete the printer will display a message other than Upgrading to… (message will vary due to the printer's current state).
If experiencing problems copying the file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ800DISK_Axxxx.FMW LPT1).
Type copy DJ800PS_Axxxx.FMW LPT1 , and then press Enter to send the formatter code image. The printer's front panel will display FMTUPGRADE (or similar) in the Job Management menu. Once the upgrade is done, the printer will display a message other than FMTUPGRADE (message will vary due to the printer's current state).
If experiencing problems copying the file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ800PS_Axxxx.FMW LPT1).
Type copy DJ500_Axxxx.FMW LPT1 , then press Enter to send the engine code image. An image of the printer, with an arrow pointing to the control panel, along with a column of scrolling zeros and ones will be displayed on the front panel display for a short period of time. Then, an image of an hourglass, followed by an image of the printer showing a power cord, and an arrow pointing away from the wall, will be displayed.
If experiencing problems copying the engine code image file to the printer, try using the binary switch (/b) in the filename and resend (for example, copy /b DJ500_Axxxx.FMW LPT1).
Remove the power cord from the back of the printer. Do not turn the power off with the power switch. Wait 30 seconds.
Читайте также: