Ipibl l8 прошивка bios
Система
сам ксеон
мать асус p5k pro сокет 775 биос прошит
оперативка кингстон 4 гига 800Мгц
видео 770 нвидиа
В общем так гнал я его тремя показателями вольтаж цпу север мост и оперативки, но работает не стабильно на 3.6 Ггц 1.215 цпу 2 V оперативка и 1.35 север мост игры вылетают комп зависает , еще кое что биос прошит но сменил винду конечно врятли но все же может нужно опять биос перешить кто игрался с ксеонами подскажите
Аналогичная ситуация
ксеон е5450
мать гигабайт ep43-s3l сокет 775, биос 9с
оперативка трансценд 8 гб 667 мгц
гнал по частоте FSB и памяти, соотношение DRAM:FSB 1:1,
единственное, чего удалось достичь - 3,6 ГГц, напряжения ЦПУ и памяти номинальные. Любые попытки повысить частоту процессора и памяти напряжениями приводят к сбою загрузки. Получается, что при макс. множителе процессора х9 и реальной частоте FSB (QDR) 400 это единственный работоспособный вариант, т.к. соотношение DRAM:FSB 1:1 может быть достигнуто только путем выставления множителя частоты памяти 2.0, (т.е. RAM strapping =D, DDR2=800), при этом эффективная частота шины FSB выходит 1600, и это предел возможностей мамки. так что биос наверно не при делах.
На частоте 3,6 ГГц винда загружается нормально, игры требовательные к частоте ЦПУ(напр. Ил-2 БзС) тянет нормально, однако стресс-тест в АИДА64 не проходит, на 100% нагрузке температура ЦПУ достигает 72С, и начинается троттлинг с резким падением производительности.
Если кто в курсе, подскажите пжлст, можно ли снизить температуру на частоте 3,6 ГГц понижением напряжения на ЦПУ, или только новый кулер поможет?
omfg74, Советую Deepcool GAMMAXX S40, ибо он охлаждает примерно также, как и GAMMAXX 400, но при это заметно тише.
nobrain,
может и так, а только у гаммы 400 расход воздуха почти на 20 кубиков в минуту выше, а у меня вдобавок gtx 580 в корпусе:D, тоже не слишком тихое удовольствие. Так что решил променять тишину на немного холода:D
В любом случае, спасибо Вам за совет!
omfg74,
Отпишитесь по результатам :) Насколько эффективнее GAMMAXX 400 в сравнении со штатным кулером ксеона.
grotesque, для Intel у него клипсы не применяются, они идут в комплекте только на AMDшные процессоры.
nobrain, это не так. Клипсы всегда были и есть только для платформ Intel!
Тоже самое и для Gammax 400
Добавлено через 6 минут 43 секунды
С точки зрения надежности, при одинаковой стоимости с кулерами у которых полноценный бэкплейт, лучше бы не покупать такие одноразовые защелки.
grotesque,
Под клипсами, я имел ввиду другое, как для крепления у AMDшных сокетов - скоба с защёлками ..
Но увы - я не видел кулеров такой же эффективности, и такой же цены, с полноценным винтовым креплением ..
Поставил себе на 775 сокет, мать GA-EP35DS3P,спокойно разогнался до 4Ггц (444 по шине) напруга 1,315. Не больше 65 градусов в AIDA Stress FPU.
omfg74,
Отпишитесь по результатам :) Насколько эффективнее GAMMAXX 400 в сравнении со штатным кулером ксеона.
Всем доброго времени суток. Отпишусь пока о промежуточных результатах.
Итак, поскольку мой gammaxx 400 ещё в пути, я взял погонять у сына младшую модель, gammax 300. Штатного кулера на ксеон у меня никогда не было (проц достался мне в пластике, "как есть"), я пользовал штатный интеловский кулер, который до этого охлаждал Core 2 Duo E8500 без разгона.
На ксеоне, разогнанном до 3,6 ГГц (условия разгона описывал в одном из предыдущих постов), штатный кулер выдавал 49 градусов в простое, далее по стресс-тесту AIDA64 extreme (CPU, FPU, system memory, system cache) температура достигала 75 - 76 градусов за первые 3-4 минуты, после чего начинался троттлинг. Как вариант, раньше могли возникнуть ошибки памяти и кэша, в любом случае скорый и неминуемый фейл.
Теперь по gammax 300. Вряд ли мне следует описывать этот кулер в подробностях здесь (имеющий гугл да загуглит), скажу лишь, что эта модель с 12 см вентилятором, тремя трубками и кольцевым креплением к материнке (тоже без бэкплейта). При монтаже проблем не испытывал.
Результаты: CPU в простое: 31 градус; по стресс-тесту AIDA64 extreme (CPU, FPU, system memory, system cache) температура находится в пределах от 49 до 53 градусов (если параллельно с тестом в аиде делать чего-нибудь ещё, температура скачет вверх-вниз в указанном диапазоне, рисуя зубчатый график). На штатных таймингах 5-5-5-15 фейлит стресс-тест памяти в первые 10 минут, при увеличении таймингов до 6-6-6-18 стресс-тест проходит стабильно в течение 1 часа, дольше не проверял, и думаю нет смысла.
Такие вот дела. Если кого интересует, могу выложить скриншоты из аиды, только скажите, какие именно параметры/графики представляют интерес.
Добавлено через 7 минут 53 секунды
Поставил себе на 775 сокет, мать GA-EP35DS3P,спокойно разогнался до 4Ггц (444 по шине) напруга 1,315. Не больше 65 градусов в AIDA Stress FPU.
А как Вам удалось получить 444 по шине, если не секрет? У Вас DRAM:FSB 1:1?
Тоже хочу 4 ГГц, но не знаю как :@
Поднял до 445, напругу опустил в биосе до 1,3v. AIDA определила как 1,28. Память DDR2 Kingston 2*2G, на 1068 Мгц завелась нормально. В тестах стабилен, быстр, холоден))) Кулер Noctua NH-D14.В тесте CINEBENCH быстрее i5 .
Работает на vBulletin® версия 3.6.10.
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Перевод: zCarot
HP Recommended
- Mark as New
- Bookmark
- Subscribe
- Email to a Friend
Hello, I've noticed a lack of useful setting in my BIOS and was wondering if there was an update to give me settings like constant power out on an USB port and turn over a network. Can anyone help?
Jeet_singh
05-06-2017 03:27 PM
HP Recommended
- Mark as New
- Bookmark
- Subscribe
- Email to a Friend
Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for the First Time Here? Learn How to Post and More.
As I understand the computer doesn't boot back into the windows since the last attempt at updating/Flashing the BIOS, Don't worry I'll help you out, however, I need a few more details to provide an accurate solution:
Do you know if this was a BIOS or a windows update?
When was the last time it worked (Date)?
Have you attempted any steps on your own before posting on HP Forums?
In the meantime, please attempt the below steps:
Start with a hard reset to release any excessive static on the PC:
* If Windows is open, click Start and then Shutdown.
* If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off.
* With the power off, disconnect the power cord from the back of the computer.
* With the power off and the power cord disconnected, press the power button on the computer for 5 seconds. The power light indicator on or near the power button might turn on briefly but then go out.
* Reconnect the power cord and turn on the power.
Attempt to reset or recover the existing BIOS (if the recent update was interrupted): Click here
Step 1: Verify the current BIOS version installed and the correct ROM Family SSID for your PC
Step 2: Find the BIOS updates
Step 3: Download and install the BIOS update
If you wish to help others looking for the same solution as you've found, mark the post as Accepted Solution.
If you wish to show appreciation for my effort, please click the Thumbs up icon at the bottom of my comment.
HP Recommended
- Mark as New
- Bookmark
- Subscribe
- Email to a Friend
I wanted to update my BIOS to version 5.43 but on the installation program it says that you must have Windows 7 or Windows Vista.
Since I updated my system to Windows 10 do I have to downgrade it to do that?
12-13-2017 02:15 AM
HP Recommended
- Mark as New
- Bookmark
- Subscribe
- Email to a Friend
> Since I updated my system to Windows 10 do I have to downgrade it to do that?
Probably not. They probably mean that trying to update requires a "supported" operating system.
Windows Vista was supported until April 2017. Windows 7 will be supported until January 2020.
> I wanted to update my BIOS to version 5.43 .
What problem are you trying to solve that you think that a BIOS update is the solution?
I am a long-term resident in the "camp" that almost never does a BIOS update, unless the documentation that accompanies the update suggests that the update will fix a problem that I am having.
This forum has many posts, where a BIOS update has "bricked" the motherboard.
Sometimes, there is no remedy.
Sometimes, there is a remedy that does not require replacing the motherboard.
Sometimes, the only remedy is to purchase a [expensive!] replacement motherboard.
Either way, it will be a lot of effort to remediate to "revive" a bad BIOS update experience.
So, what is the "real" problem with your computer?
Welcome to this forum.
Please click the purple/white "Thumbs Up" icon for every response that is helpful.
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Jorona
I have Force Flashed an IPIBL-LA mobo with a IPIBL-LB Bios. It works swimmingly with a Core 2 Quad Q8200 (45nm, 2.33ghz, 1333fsb) and a Pentium Dual Core E5300 (45nm, 2.6ghz, 800fsb) both of which didn't work before the flash.
I am including a guide on how to do it.
You need a CPU that lets the standard bios boot (65nm), a USB Flash Drive, and all the files I'm going to link too.
This is the file that contains the IPIBL-LB Bios. Use WinRAR to pull "BEN5.43" out of this archive
This is a utility That will allow you to make a bootable USB flashdrive that is good for flashing.
These are the files required to make a bootable USB drive with the utility above.
This is an ES Version of AMI Flash. this will alow us to force flash the other bios.
5.) Use the HP utility to create a bootable flash drive. The "bootme.zip" has all the files required to make a bootable flash drive.
6.) Unzip file afudos.exe from the archive AFUDOS229ES.zip onto the Flash drive.
7.) Move the "BEN5.43" file to the flash drive.
8.) Take the flash drive and insert it into your IPIBL-LA Motherboard.
9.) Boot the system with the compatible CPU and hit "ESC" to get to the boot list. Select your Flash drive.
10.) Once you get to a command prompt in DOS type "afudos /i"BEN5.43" /pbnc /n" The system will begin flashing the new BIOS. Once complete it should tell you to reboot.
TADA! You now have a 45nm compatible IPIBL-LA MoBo! The Network chipset on the two boards is different. So you'll need a PCI network card. 5 dollar NIC, or 100+ dollar replacement mobo. You be the judge.
javamocha2000
Subzii
Hi I am having trouble doing this flash to my motherboard.
any possible chance you can help me out as I cant download all the files from the links above.
Subzii
. You now have a 45nm compatable IPIBL-LA MoBo! The Network chipset on the two boards is different. So you'll need a PCI network card. 5 dollar NIC, or 100+ dollar replacement mobo. You be the judge.
Hi guys I have flashed my bios with the IPIBL-LB bios but I am having issues with the network card has anyone found a fix for it? could someone please reply.
Rasurarch
Hello guys i will added codes but locked bios g33 chipset have on mobo really i dont understand please help me
DeathBringer
Post screenshots of first ( CPU ) & third ( Mainboard ) tabs of CPU-Z with native CPU.
What's happened when you try to boot your motherboard with your Xeon E5430 ? Describe in details.
Tell sSpec of your Xeon E5430 .
Rasurarch
(05-09-2018, 06:45 AM) DeathBringer Wrote: [ -> ] Post screenshots of first ( CPU ) & third ( Mainboard ) tabs of CPU-Z with native CPU.
What's happened when you try to boot your motherboard with your Xeon E5430 ? Describe in details.
Tell sSpec of your Xeon E5430 .
antidot
Junior Member
(12-29-2018, 02:39 PM) Lost_N_BIOS Wrote: Must be someone set all these to user and then left them even not working, and then all that same BIOS gets passed around like it's default.
I assume already modified since so many changes, and expected you guys could see all that.
enyel
Junior Member
Just tried CrystalCPUID where you can set the "Intel Enhanced SpeedStep" and the multiplier can be set lower than 10x no problem, but NOT any higher. I did a little bit of research on this subject, there's tons of info on this.
The only other alternative is to speed up the FSB from 333MHz to something higher. The Intel G33 chipset doesn't like it, the screen freezes when I up it a little bit.
IPIBL-LB is a cheap board, you get what you pay for. It can be unlocked to support RAID 0, 1 and 5. Do a 771 to 775 mod, plug in a decent speed Xeon and voila. Case closed !
I have heard about using software to modify the fsb clock, but i donwloaded a couple different, that i had read did it with this mobo, but none of them had the proper clock generator, do you any guys have the right one for this board although u don't use it.
i've bought a second hand Radeon HD7850 which i want to overclock in results HD7870 (about +25% which is sure working), and for some games the cpu will bottleneck the GPU, so higher frequency of the CPU would be better.
Lost_N_BIOS
Posting Freak
Look up this chipset and SetFSB clockgen and you should find some people saying the clockgen they use.
If not, trial and error will get you there But be ready for crashes while you try to find it, don't keep open files not saved.
enyel
Junior Member
(01-21-2019, 10:42 PM) Lost_N_BIOS Wrote: Look up this chipset and SetFSB clockgen and you should find some people saying the clockgen they use.
If not, trial and error will get you there But be ready for crashes while you try to find it, don't keep open files not saved.
I saw this comment on the net, but on none version of softfsb or clockgen that i'm able to find it's PLL IDT CV174C, that's why i asked here as i already tried all versions, maybe some mate will have the right one, is like anybody has deleted the version i need from internet hehehe
Lost_N_BIOS
Posting Freak
I grabbed random version in my folder (setfsb_2_2_134_98), and see CV174CPAG, that's probably the correct one to use
I see this in the info file too CV174CPAG (Intel DG965LV/DQ965GF/DG965RY/DG965WH/DP965LT)
I downloaded the latest 2.3.178.134 and I see same, but it's weird version talking about paying 800 Yen for the setFSB button to work! WTH!
Читайте также: