Armoury crate asus не показывает температуру процессора
Let me know if there is any problem during the process and the result.
Thank you.
I decided to reinstall Armoury Crate.
Hello Olexander,
Please go to setting>apps and check if there is any Armoury Crate related app left.
You may further try program like Geek uninstall to make sure that the uninstallation went successfully and completely.
Then you may try to run the installer again.
Thank you.
My laptop ROG Strix G (G531GT) also has same problem, but I never update BIOS since year 2019 (No BIOS update released for these years). 307 is the latest BIOS version for G513GT. However, the SMART mode for AURA SYNC is not working too. So, I think this is the ARMOURY CRATE software issue.
Dear all,
Please update to the latest Armoury Crate V4.0.8.0.
If you have any issue, please let me know.
Thank you.
Solution/ Bug in Installer
I reinstalled Armoury Crate and finally am seeing the CPU temps in Armoury Crate
Steps:
1. Uninstall Armoury Crate using the uninstall tool
2. Restart to fully apply changes
3. Open the Install Utility, and instead of selecting 'Both Armoury Crate and AURA Creator', choose to install only AURA Creator.
4. Installation will complete quickly -> Restart to fully apply changes
5. Confirm that AURA Creator is working fine (you can update the aura creator related stuff from the three dots menu inside it)
6. Open the Install Utility and now choose to install only Armoury Crate.
7. This should work, will take some tie. It would look like it gets stuck at "Installing components for the Connected Devices" but it will not be stuck this time, will be completed.
8. Restart to apply changes
9. done
It doesn't work for me. Everything uninstalls perfectly. Rebooting. When installing (no matter which of the options I choose, I tried all the three) at the stage "Installing components for the connected devices" there is an error "Installation failed. Please restart the system and check the Internet connection status before retrying.100", and it is not possible to install either Armoury Crate or Aura. Exactly the same problem occurred six months ago. I wasn't able to solve it then and now. In any case, I am more than 100% sure that I have no problems with either network connection or firewall.
My Armoury Crate doesnt show me the temperature of my CPU after I let my local PC Shop Update the BIOS to the latent Firmware, due to startup problems. In the BIOS the temperatures Are read fine without any problems. I re-installed armoury crate , without any changes. My Setup is a AMD Ryzen 5 2600 with an ASUS Ryuo 120 watercooling AIO.
Thanks for the Help,
Hey, i have the same problem too, but with ryzen 4800h and gtx 1050ti. I think it is not hardwired problem. It is because i just check my bois, and it reads my cpu tem and mv. However, in armoury crate, it didn't read them. I'm also trying to fix that. ( It also happens when i Update bios )
I am having the same issue with Ryzen 4800h and 2060 you on an Adus Tuf A15. Just updated the bios to the release from July 3rd and now no temp or voltage for the CPU. If you happen to figure it out please let me know
try using a 3rd party app like Open Hardware Monitor or SpeedFan and see if they can display CPU temp.,
There is a new armoury crate service that fixes it. Can download it from the myasus app. Uninstall the armoury crate service (just the service) then install the new one and reboot. Temp and voltage back, although it seems like it is reading a lower temp then hwinfo64 so who knows. Seems shady since cpu temp is the thing that everyone is complaining out and now it just seems to read lower
This worked for me as of August 20, 2020.
You have to go to:
Settings > Apps > Apps & Features > ARMOURY CRATE Service > Uninstall.
When it's done it will ask you to restart but you can just click later as you will have to restart anyway once you reinstall the new service.
Now open MyASUS, it should be in the start menu if you never removed it.
MyASUS > Software update (fourth tab from the top, has a little graph inside two circular arrows) > Driver & Tools > Scroll down to where it says "Utilities" and download Armoury Crate Service V3.0.5 (It was the first one for me). Make sure the version number is 3.0.5 as there are several AC Service downloads listed.
Once you have the download it is as simple as extracting the zip file and running the ArmouryCrateSetup.exe file. Once it is done it will prompt you to restart your machine. Armoury Crate should now display your CPU temp and voltage as normal although AC is kinda bad at accurately displaying stats anyway.
Please let me know if this works and if so, feel free to post these instructions in any other thread about this issue as I've seen several threads on this so far
Вообщем появилась проблема, захожу в ARMOURY CRATE, и там где должны отображаться все параметры и режимы охлаждения, стоит просто ОС.
Может быть, тоже кто-то сталкивался с подобным, что в таком случае делать?
переключите кнопами Fn+f5 на режим Balanced и что нит изменился?
.
Olga Cat Знаток (279) Комбинация Fn+f5 тоже не работает
У ноутбуков серии ROG стоит своя система охлаждения никак не связанная с основной системой. Эта система охлаждения полностью автономна и не может быть "отрегулирована". Максимум можно узнать температуру. Сам сталкивался с такой проблемой, много кто с такой проблемой встречался. Если у тебя проблемы с охлаждением, то либо покупай охлаждающую подставку, либо через сторонние приложения снижай максимальную частоту процессора\видеокарты. А на счет остального не знаю.
Чувак, я тоже с ноутбуком РОГ не вчера познакомилась. Поясню, если что то не понятно.
Там где в видите строку, где написано Windows, там должны находиться 3 вида режимов охлаждения: Тихий, Стандартный, Турбо. Их можно регулировать в зависимости от нагрузки на процессор.
Вы так говорите просто, как будто я просто так из не откуда взяла проблему.
У меня проблема на подобие твоей, хочу сказать одно, давай долбить их поддержку, ибо это проблема исключительно с их софтом у меня после обновления программы перестали профиля отображаться, а до этого проблема с овнрдрайвом была
gl704gm такая же шляпа. Armoury Crate обновилась до 2.1.9.0 и остался только режим Windows. Balanced и все остальные пропали
Такая же фигня. Тех поддержка ответила, что нужно по ссылкам обновить утилиту. По ссылке скачалась какая-то папка с всякой дичью. Ещё не работает Овердрайв. И не работал. Сказали обновить драйвер Видеокарты. Обновил. Не работает. Думаю может через Биос нужно как-то её активировать. Подскажите что с Овердрайвом не так. Кстати Армори заработал сам собой, видимо опять подобновился
Ноутбук ASUS ROG G703GXR GRIFFIN - Я могу вам точно сказать, в чем тут проблема - но вариантов решения я её пока не нашел. Armoury Crate не работает и не показывает настройки именно потому, что не запускается некая служба, именуемая ARMOURY CRATE Service - найти ее можно в разделе "Службы" в диспетчере и т. д. Если эта служба не запущена - остановлена или сбоит - то и утилита Armoury Crate не работает. У меня вот сейчас она начала при запуске выдавать "Ошибка 1392:Файл или папка повреждены. Чтение невозможно." - и пока я эту службу не запущу - хоть застрелись, а утилта работать не будет. После переустановки утилиты - вообще пропало все, что было в этой утилите - что радует еще больше. Пытался найти ответ в интернете - но все без толку, буду пробовать писать в тех поддержку производителя, но и там шансов мало. Может тут кто докумекает, что можно сделать..
Через ССклинер в инструмента найти нужно армори криэйт сервайс и потом кнопочку восстановить. Мне помогло, сначала появились данный об температурах и оборотах, спустя 20 минут о чудо, сами собой появились профили охлаждения
Same thing here after update with the Bios to the latest 3.09. My memory is still listed at 3200 like the screen shot so it doesn't look like it got gimped, but no temp or voltage for the CPU. On a side note, how is the performance on yours? I feel like the CPU isn't boosting like it should during games or running cinebench r20 and other cpu intensive stuff. I have the 4800h and 2060, does anyone know a good test to make sure it is performing as it should?
Just letting you guys know, I have the same problem after updating the BIOS.
Email from ASUS support:
Thank you for your response. My name is David S. I appreciate the time out you have taken to notify us of your concern and I apologize for any inconvenience caused. I have received feedback on your case. The latest Armoury Crate version 3.0.4 or later will resolve the CPU data issue. This will be available the 2nd week of August to download. RAM speed behavior, make sure to have the ac adapter connected and change to manual mode in Armoury Crate.
If you have any other questions, comments or concerns please feel free to reach out to us again. Thanks for contacting ASUS support.
Hello, same problem here, I have AC 3.0.4 and CPU temp/voltage still not showing. Any fix? Thanks!
BIOS updated to 3.09? Mine did the same thing. I'm assuming this is an FA506IV. Mine also doesn't show temp or voltage. And my RAM downclocked on its own from 3200 to 2667. It didn't do this in the v3.04 that it shipped with.
You might want to try and go on the MyAsus app and download the armoury crate services for your model. Uninstall it then reinstall and reboot. Should show the values afterwards unless you're missing other services.
Just tried uninstalling armoury crate and services, reboot, reinstalled both, another reboot. still not showing cpu temp and voltage
my armory crate doesnt even have that page. why?
We need to get a fix for this ASAP.
Hi all not sure if this will work for everyone but I noticed this happened on my G14 after windows update installed an AMD driver. The update did not show in the update history but I immediately noticed my CPU temp was no longer reported. Took me awhile but I figured out the driver was AMDRyzenMaster Device. Rolling that driver back resolved and I now have CPU Temp in Armory Crate again.
Hello, I 've found that driver under the Device manager but how did you roll the driver back? this option in my case is grayed out. Thank you!
Hi guys first of all english is not my first language i apologize if my grammar is wrong. My armoury crate too doesn't show the CPU temperature and voltage. I have my windows update on and it automatically updated the BIOS. I have read past comments on this thread. Asking if you guys have resolved the issue yet. Thanks.
This worked for me as of August 20, 2020.
You have to go to:
Settings > Apps > Apps & Features > ARMOURY CRATE Service > Uninstall.
When it's done it will ask you to restart but you can just click later as you will have to restart anyway once you reinstall the new service.
Now open MyASUS, it should be in the start menu if you never removed it.
MyASUS > Software update (fourth tab from the top, has a little graph inside two circular arrows) > Driver & Tools > Scroll down to where it says "Utilities" and download Armoury Crate Service V3.0.5 (It was the first one for me). Make sure the version number is 3.0.5 as there are several AC Service downloads listed.
Once you have the download it is as simple as extracting the zip file and running the ArmouryCrateSetup.exe file. Once it is done it will prompt you to restart your machine. Armoury Crate should now display your CPU temp and voltage as normal although AC is kinda bad at accurately displaying stats anyway.
Please let me know if this works and if so, feel free to post these instructions in any other thread about this issue as I've seen several threads on this so far
Ноутбук TUF Gaming A15, работающий на базе операционной системы Windows 10 Pro, представляет собой особо надежную геймерскую платформу, которая поможет вам добиться победы в любой игре. В его аппаратную конфигурацию входят новейший процессор AMD Ryzen 9 и видеокарта GeForce RTX 2060, которые гарантируют высокую скорость и плавное изображение на IPS-дисплее с частотой обновления до 144 Гц. Несмотря на более компактный корпус по сравнению с предыдущими моделями серии, TUF Gaming A15 наделен аккумулятором увеличенной емкости (90 Вт·ч), что означает длительное время автономной работы. Эффективная система охлаждения с функцией самоочистки гарантирует стабильность под высокими нагрузками, что, в сочетании с особой прочностью, характеризующей всю серию TUF, делает данный ноутбук прекрасным выбором для геймеров, которые постоянно находятся в движении.
Описание индексов моделей
FX506IV
Вторая буква в обозначении это видеокарта: IH - 1650, II - 1650ti, IU - 1660ti, IV - 2060
506 - 15" 6-я серия
706 - 17" 6 серия
HN177T
H - Регион RU
N - 15 дюймов, 7 - 17 дюймов, E - 14 дюймов
0 - 1650, 1 - 1660, 2 - 2080
?
?
T - windows
FX506IV-HN187T - 4800H/16GB/1TB SSD/RTX2060/144Hz/Win10
FX506IV-HN192T - 4900H/16GB/1TB SSD/RTX2060/144Hz/Win10
FX506IU - 4800H 1660TI
HN326 (FX506IV) - 512 гб ssd, 16 RAM, + слот ssd серый цвет
HN292 - 512 гб ssd + слот ssd чёрный цвет
HN291T (FX506IU) - 512 ssd, 16 RAM, серый windows
HN187 - 1 тб ssd + слот ssd серый цвет
HN172T (X506II) - 512 ssd, 16 RAM, серый windows
Комплектации
Процессор AMD 4600h, 4800h, 4900h
Видео карта Nvidia Geforce: RTX 2060 - 6 ГБ, GTX 1660TI - 6 ГБ, GTX 1650Ti - 4 ГБ, GTX 1650 - 4 ГБ
Батарея 48 Ватт и 2.5 HDD
Батарея 90 Ватт без HDD
В комплектации с 4600h и 1650ti идёт только один слот M2
установка второго m2 диска
оба слота поддерживают только M.2 2280 nvme PCI-E x4 диски. M.2 2280 с интерфейсом SATA III не поддерживаются.
Not working on 4.1.6.0
Originally Posted by Blake@ROG
Dear all,
Please update to the latest Armoury Crate V4.0.8.0.
If you have any issue, please let me know.
Thank you.
I have a ROG Strix G17 (G712LU), AC version 4.1.6.0
Still no cpu temp
Читайте также: