Total commander файл wcmzip32 dll не найден
If you are installing Total Commander over an existing installation you usually do not need to backup anything (for exceptions, see "Additionally" below). If you, however, want to install Total Commander on another computer or are planning to reformat your hard drive, these are the files you need to backup:
Ошибки библиотеки динамической компоновки WCMZIP64.DLL
Файл WCMZIP64.DLL считается разновидностью DLL-файла. DLL-файлы, такие как WCMZIP64.DLL, по сути являются справочником, хранящим информацию и инструкции для исполняемых файлов (EXE-файлов), например MpSigStub.exe. Данные файлы были созданы для того, чтобы различные программы (например, Total Commander) имели общий доступ к файлу WCMZIP64.DLL для более эффективного распределения памяти, что в свою очередь способствует повышению быстродействия компьютера.
- Нарушение прав доступа по адресу — WCMZIP64.DLL.
- Не удается найти WCMZIP64.DLL.
- Не удается найти C:\totalcmd\WCMZIP64.DLL.
- Не удается зарегистрировать WCMZIP64.DLL.
- Не удается запустить Total Commander. Отсутствует требуемый компонент: WCMZIP64.DLL. Повторите установку Total Commander.
- Не удалось загрузить WCMZIP64.DLL.
- Не удалось запустить приложение, потому что не найден WCMZIP64.DLL.
- Файл WCMZIP64.DLL отсутствует или поврежден.
- Не удалось запустить это приложение, потому что не найден WCMZIP64.DLL. Попробуйте переустановить программу, чтобы устранить эту проблему.
Файл WCMZIP64.DLL может отсутствовать из-за случайного удаления, быть удаленным другой программой как общий файл (общий с Total Commander) или быть удаленным в результате заражения вредоносным программным обеспечением. Кроме того, повреждение файла WCMZIP64.DLL может быть вызвано отключением питания при загрузке Total Commander, сбоем системы при загрузке WCMZIP64.DLL, наличием плохих секторов на запоминающем устройстве (обычно это основной жесткий диск) или, как нередко бывает, заражением вредоносным программным обеспечением. Таким образом, крайне важно, чтобы антивирус постоянно поддерживался в актуальном состоянии и регулярно проводил сканирование системы.
Шаг 2. Если вы недавно установили приложение Total Commander (или схожее программное обеспечение), удалите его, затем попробуйте переустановить Total Commander.
Чтобы удалить программное обеспечение Total Commander, выполните следующие инструкции (Windows XP, Vista, 7, 8 и 10):
После полного удаления приложения следует перезагрузить ПК и заново установить Total Commander.
Если на этапе 2 также не удается устранить ошибку WCMZIP64.DLL, перейдите к шагу 3 ниже.
Total Commander 9.2
Ghisler Software GmbH
What to backup
- wincmd.ini This file stores all of your Total Commander related settings except those concerning FTP connections
- wcx_ftp.ini Here are all FTP related settings, most importantly your FTP connections (which you see when you press Ctrl-F)
- wincmd.key
tcmdkey.zip Either of these is your keyfile if you are using a registered version of Total Commander.
tcmdkey.zip contains wincmd.key and the compression level of the zip file must be set to 0 (zero).
- *.bar files These files store your button bar(s). No.bar is an exception, as this is an automatically generated empty button bar.
- usercmd.ini This file store user defined commands (em_commands).
- tcignore.txt This file store by default the ignore list. The file name is user configurable though.
- Language\wcmd_*.ini Files of this type stores user defined commands that are available when using the corresponding wcmd_*.mnu file.
Step 1: Restore your PC back to the latest restore point, "snapshot", or backup image before error occurred.
To begin System Restore (Windows XP, Vista, 7, 8, and 10):
- Hit the Windows Start button
- When you see the search box, type "System Restore" and press "ENTER".
- In the search results, find and click System Restore.
- Please enter the administrator password (if applicable / prompted).
- Follow the steps in the System Restore Wizard to choose a relevant restore point.
- Restore your computer to that backup image.
If the Step 1 fails to resolve the WCMZIP32.DLL error, please proceed to the Step 2 below.
Where to find those files?
The location of the files wincmd.ini, and wcx_ftp.ini and pkplugin.ini, lsplugin.ini, fsplugin.ini, and contplug.ini you can ascertain by opening from menu: Help -> About Total Commander.
The files totalcmd.inc, wcmzip32.dll, and Sfxhead.sfx, are located in the program folder of Total Commanders.
The menu and language files you can find in the folder LANGUAGE\ within the program dir of TC.
DLL files such as WCMZIP32.DLL are categorized as Win32 DLL (Dynamic Link Library) files. As a Dynamic Link Library file, it was created for use in Total Commander 9.2 by Ghisler Software GmbH.
The first release in the Windows 10 Operating System for WCMZIP32.DLL was on 07/04/2018 inside Total Commander 9.2. This file marks the latest update from Ghisler Software GmbH, according to our records.
Please see below for more detailed information, DLL file troubleshooting instructions, and free downloads of different versions of WCMZIP32.DLL.
File Analysis Provided by Jason Geater (Author)
Recommended Download: Fix WCMZIP32.DLL / Total Commander-related registry issues with WinThruster.
Compatible with Windows 10, 8, 7, Vista, XP and 2000
Average User Rating
Optional Offer for WinThruster by Solvusoft
| EULA | Privacy Policy | Terms | Uninstall
File Details | |
---|---|
Entry Point: | 0xb0bc |
Code Size: | 65536 |
File Info | Description |
---|---|
File Size: | 129 kB |
File Modification Date/Time: | 2020:02:06 15:15:16+00:00 |
File Type: | Win32 DLL |
MIME Type: | application/octet-stream |
Machine Type: | Intel 386 or later, and compatibles |
Time Stamp: | 2017:11:13 10:51:56+00:00 |
PE Type: | PE32 |
Linker Version: | 6.0 |
Code Size: | 65536 |
Initialized Data Size: | 61440 |
Uninitialized Data Size: | 0 |
Entry Point: | 0xb0bc |
OS Version: | 4.0 |
Image Version: | 0.0 |
Subsystem Version: | 4.0 |
Subsystem: | Windows GUI |
✻ Portions of file data provided by Exiftool (Phil Harvey) distributed under the Perl Artistic License.
Optional Offer for WinThruster by Solvusoft | EULA | Privacy Policy | Terms | Uninstall
Ошибки библиотеки динамической компоновки WCMZIP32.DLL
Файл WCMZIP32.DLL считается разновидностью DLL-файла. DLL-файлы, такие как WCMZIP32.DLL, по сути являются справочником, хранящим информацию и инструкции для исполняемых файлов (EXE-файлов), например MpSigStub.exe. Данные файлы были созданы для того, чтобы различные программы (например, Total Commander) имели общий доступ к файлу WCMZIP32.DLL для более эффективного распределения памяти, что в свою очередь способствует повышению быстродействия компьютера.
- Нарушение прав доступа по адресу — WCMZIP32.DLL.
- Не удается найти WCMZIP32.DLL.
- Не удается найти C:\totalcmd\WCMZIP32.DLL.
- Не удается зарегистрировать WCMZIP32.DLL.
- Не удается запустить Total Commander. Отсутствует требуемый компонент: WCMZIP32.DLL. Повторите установку Total Commander.
- Не удалось загрузить WCMZIP32.DLL.
- Не удалось запустить приложение, потому что не найден WCMZIP32.DLL.
- Файл WCMZIP32.DLL отсутствует или поврежден.
- Не удалось запустить это приложение, потому что не найден WCMZIP32.DLL. Попробуйте переустановить программу, чтобы устранить эту проблему.
Файл WCMZIP32.DLL может отсутствовать из-за случайного удаления, быть удаленным другой программой как общий файл (общий с Total Commander) или быть удаленным в результате заражения вредоносным программным обеспечением. Кроме того, повреждение файла WCMZIP32.DLL может быть вызвано отключением питания при загрузке Total Commander, сбоем системы при загрузке WCMZIP32.DLL, наличием плохих секторов на запоминающем устройстве (обычно это основной жесткий диск) или, как нередко бывает, заражением вредоносным программным обеспечением. Таким образом, крайне важно, чтобы антивирус постоянно поддерживался в актуальном состоянии и регулярно проводил сканирование системы.
Шаг 3. Выполните обновление Windows.
Если ни один из предыдущих трех шагов по устранению неполадок не разрешил проблему, можно попробовать более агрессивный подход (примечание: не рекомендуется пользователям ПК начального уровня), загрузив и заменив соответствующую версию файла WCMZIP64.DLL. Мы храним полную базу данных файлов WCMZIP64.DLL со 100%-ной гарантией отсутствия вредоносного программного обеспечения для любой применимой версии Total Commander . Чтобы загрузить и правильно заменить файл, выполните следующие действия:
Если этот последний шаг оказался безрезультативным и ошибка по-прежнему не устранена, единственно возможным вариантом остается выполнение чистой установки Windows 10.
СОВЕТ ОТ СПЕЦИАЛИСТА: Мы должны подчеркнуть, что переустановка Windows является достаточно длительной и сложной задачей для решения проблем, связанных с WCMZIP64.DLL. Во избежание потери данных следует убедиться, что перед началом процесса вы создали резервные копии всех важных документов, изображений, установщиков программного обеспечения и других персональных данных. Если вы в настоящее время не создаете резервных копий своих данных, вам необходимо сделать это немедленно.
MaxX Power Member
Posts: 715 Joined: 2012-03-23, 18:15 UTC Location: Earth
Plugins
Do not forget to backup plugin configurations. Usually, each plugin uses its own settings file, however, some use the proposed common ini files:
- pkplugin.ini
lsplugin.ini
fsplugin.ini
contplug.ini usually located in the same directory as wincmd.ini. See each plugin's documentation for details about where it stores its settings.
Additionally
Some files get overwritten when you install Total Commander on top of itself. You either need to back them up or change their attributes to read-only.
[TC 8.01 final x32] WCMZIP32.DLL AES error
I get error-messages when trying to encrypt my ftp's with master-password.
I use TC 8.01 final x32 on Win 7 x64, 'WCMZIP32.DLL' file is default from the official installer.
p.s.
x64 works fine.
ghisler(Author) Site Admin
Posts: 42423 Joined: 2003-02-04, 09:46 UTC Location: Switzerland Contact:
Please go to the Total Commander directory and press Alt+Enter on the wcmzip32.dll. It should have a valid digital signature with signature date
Thursday, 19. February 2009 00:40:52
If you get a bad signature warning, your certificates in Internet Explorer are out of date.
MaxX Power Member
Posts: 715 Joined: 2012-03-23, 18:15 UTC Location: Earth
2ghisler(Author)
I've already compared and checked the file with original installer's one - both of them are identical. Sirnature is right.
my md5:
78ab27b9290e9cd1bc2d403f9981aa5b *WCMZIP32.DLL
ghisler(Author) Site Admin
Posts: 42423 Joined: 2003-02-04, 09:46 UTC Location: Switzerland Contact:
It may also be a wrong system clock. This can happen when the 3V backup battery on the mainboard dies. Please check whether system date&time are correct or not.
MaxX Power Member
Posts: 715 Joined: 2012-03-23, 18:15 UTC Location: Earth
ghisler(Author) Site Admin
Posts: 42423 Joined: 2003-02-04, 09:46 UTC Location: Switzerland Contact:
Шаг 1. Восстановите компьютер до последней точки восстановления, «моментального снимка» или образа резервной копии, которые предшествуют появлению ошибки.
Чтобы начать восстановление системы (Windows XP, Vista, 7, 8 и 10):
Если на этапе 1 не удается устранить ошибку WCMZIP64.DLL, перейдите к шагу 2 ниже.
Шаг 2. Если вы недавно установили приложение Total Commander (или схожее программное обеспечение), удалите его, затем попробуйте переустановить Total Commander.
Чтобы удалить программное обеспечение Total Commander, выполните следующие инструкции (Windows XP, Vista, 7, 8 и 10):
После полного удаления приложения следует перезагрузить ПК и заново установить Total Commander.
Если на этапе 2 также не удается устранить ошибку WCMZIP32.DLL, перейдите к шагу 3 ниже.
Total Commander 9.2
Ghisler Software GmbH
Dynamic Link Library WCMZIP32.DLL Errors
WCMZIP32.DLL is considered a type of Dynamic Link Library (DLL) file. Dynamic Link Library files, like WCMZIP32.DLL, are essentially a "guide book" that stores information and instructions for executable (EXE) files - like MpSigStub.exe - to follow. These files were created so that multiple programs (eg. Total Commander) could share the same WCMZIP32.DLL file, saving valuable memory allocation, therefore making your computer run more efficiently.
Unfortunately, what makes DLL files so convenient and efficient, also makes them extremely vulnerable to problems. If something happens to a shared DLL file, either it goes missing or gets corrupted in some way, it can generate a "runtime" error message. Runtime is pretty self-explanatory; it means that these errors are triggered when WCMZIP32.DLL is attempted to be loaded either when Total Commander is starting up, or in some cases already running. Some of the most common WCMZIP32.DLL errors include:
- Access Violation at address - WCMZIP32.DLL.
- WCMZIP32.DLL could not be found.
- Cannot find C:\totalcmd\WCMZIP32.DLL.
- Cannot register WCMZIP32.DLL.
- Cannot start Total Commander. A required component is missing: WCMZIP32.DLL. Please install Total Commander again.
- Failed to load WCMZIP32.DLL.
- The application has failed to start because WCMZIP32.DLL was not found.
- The file WCMZIP32.DLL is missing or corrupt.
- This application failed to start because WCMZIP32.DLL was not found. Re-installing the application may fix this problem.
Your WCMZIP32.DLL file could be missing due to accidental deletion, uninstalled as a shared file of another program (shared with Total Commander), or deleted by a malware infection. Furthermore, WCMZIP32.DLL file corruption could be caused from a power outage when loading Total Commander, system crash while loading WCMZIP32.DLL, bad sectors on your storage media (usually your primary hard drive), or quite commonly, a malware infection. Thus, it's critical to make sure your anti-virus is kept up-to-date and scanning regularly.
Optional Offer for WinThruster by Solvusoft | EULA | Privacy Policy | Terms | Uninstall
If you're encountering one of the error messages above, follow these troubleshooting steps to resolve your WCMZIP32.DLL issue. These troubleshooting steps are listed in the recommended order of execution.
Шаг 3. Выполните обновление Windows.
Если ни один из предыдущих трех шагов по устранению неполадок не разрешил проблему, можно попробовать более агрессивный подход (примечание: не рекомендуется пользователям ПК начального уровня), загрузив и заменив соответствующую версию файла WCMZIP32.DLL. Мы храним полную базу данных файлов WCMZIP32.DLL со 100%-ной гарантией отсутствия вредоносного программного обеспечения для любой применимой версии Total Commander . Чтобы загрузить и правильно заменить файл, выполните следующие действия:
Если этот последний шаг оказался безрезультативным и ошибка по-прежнему не устранена, единственно возможным вариантом остается выполнение чистой установки Windows 10.
СОВЕТ ОТ СПЕЦИАЛИСТА: Мы должны подчеркнуть, что переустановка Windows является достаточно длительной и сложной задачей для решения проблем, связанных с WCMZIP32.DLL. Во избежание потери данных следует убедиться, что перед началом процесса вы создали резервные копии всех важных документов, изображений, установщиков программного обеспечения и других персональных данных. Если вы в настоящее время не создаете резервных копий своих данных, вам необходимо сделать это немедленно.
Файлы Dynamic Link Library, такие как WCMZIP64.DLL, используют расширение DLL. Файл считается файлом Win64 DLL (Библиотека динамической компоновки) и впервые был создан компанией Ghisler Software GmbH для пакета ПО Total Commander 9.2.
Файл WCMZIP64.DLL впервые был выпущен в ОС Windows 10 07/04/2018 с Total Commander 9.2. Согласно нашим сведениям, это основная и наиболее актуальная версия файла от компании Ghisler Software GmbH.
Ниже приведены исчерпывающие сведения о файле, инструкции для простого устранения неполадок, возникших с файлом DLL, и список бесплатных загрузок WCMZIP64.DLL для каждой из имеющихся версий файла.
Совместимость с Windows 10, 8, 7, Vista, XP и 2000
Средняя оценка пользователей
Сведения о разработчике и ПО | |
---|---|
Программа: | Total Commander 9.2 |
Разработчик: | Ghisler Software GmbH |
Программное обеспечение: | Total Commander |
Версия ПО: | 9.2 |
Сведения о файле | |
---|---|
Точка входа: | 0xcec0 |
Размер кода: | 92672 |
Информация о файле | Описание |
---|---|
Размер файла: | 155 kB |
Дата и время изменения файла: | 2020:02:06 15:15:16+00:00 |
Тип файла: | Win64 DLL |
Тип MIME: | application/octet-stream |
Тип компьютера: | AMD AMD64 |
Метка времени: | 2018:06:25 09:19:28+00:00 |
Тип PE: | PE32+ |
Версия компоновщика: | 8.0 |
Размер кода: | 92672 |
Размер инициализированных данных: | 51200 |
Размер неинициализированных данных: | 0 |
Точка входа: | 0xcec0 |
Версия ОС: | 4.0 |
Версия образа: | 0.0 |
Версия подсистемы: | 5.2 |
Подсистема: | Windows GUI |
✻ Фрагменты данных файлов предоставлены участником Exiftool (Phil Harvey) и распространяются под лицензией Perl Artistic.
Step 3: Perform a Windows Update.
When the first two steps haven't solved your issue, it might be a good idea to run Windows Update. Many WCMZIP32.DLL error messages that are encountered can be contributed to an outdated Windows Operating System. To run Windows Update, please follow these easy steps:
- Hit the Windows Start button
- In the search box, type "Update" and press "ENTER".
- In the Windows Update dialog box, click "Check for Updates" (or similar button depending on your Windows version)
- If updates are available for download, click "Install Updates".
- After the update is completed, restart your PC.
If Windows Update failed to resolve the WCMZIP32.DLL error message, please proceed to next step. Please note that this final step is recommended for advanced PC users only.
Optional Offer for WinThruster by Solvusoft | EULA | Privacy Policy | Terms | Uninstall
If none of the previous three troubleshooting steps have resolved your issue, you can try a more aggressive approach (Note: Not recommended for amateur PC users) by downloading and replacing your appropriate WCMZIP32.DLL file version. We maintain a comprehensive database of 100% malware-free WCMZIP32.DLL files for every applicable version of Total Commander. Please follow the steps below to download and properly replace you file:
- Locate your Windows operating system version in the list of below "Download WCMZIP32.DLL Files".
- Click the appropriate "Download Now" button and download your Windows file version.
- Copy this file to the appropriate Total Commander folder location:
If this final step has failed and you're still encountering the error, you're only remaining option is to do a clean installation of Windows 10.
GEEK TIP : We must emphasize that reinstalling Windows will be a very time-consuming and advanced task to resolve WCMZIP32.DLL problems. To avoid data loss, you must be sure that you have backed-up all of your important documents, pictures, software installers, and other personal data before beginning the process. If you are not currently backing up your data, you need to do so immediately.
Optional Offer for WinThruster by Solvusoft | EULA | Privacy Policy | Terms | Uninstall
Файлы DLL, такие как WCMZIP32.DLL, классифицируются как файлы Win32 DLL (Библиотека динамической компоновки). Как файл Dynamic Link Library он был создан для использования в Total Commander 9.2 от компании Ghisler Software GmbH.
Первый выпуск файла WCMZIP32.DLL в ОС Windows 10 состоялся 07/04/2018 в составе Total Commander 9.2. По нашим данным, этот файл является последним обновлением от компании Ghisler Software GmbH.
Ниже приведены подробные сведения, порядок устранения неполадок, возникших с файлом DLL, и бесплатные загрузки различных версий файла WCMZIP32.DLL.
Совместимость с Windows 10, 8, 7, Vista, XP и 2000
Средняя оценка пользователей
Сведения о разработчике и ПО | |
---|---|
Программа: | Total Commander 9.2 |
Разработчик: | Ghisler Software GmbH |
Программное обеспечение: | Total Commander |
Версия ПО: | 9.2 |
Сведения о файле | |
---|---|
Точка входа: | 0xb0bc |
Размер кода: | 65536 |
Информация о файле | Описание |
---|---|
Размер файла: | 129 kB |
Дата и время изменения файла: | 2020:02:06 15:15:16+00:00 |
Тип файла: | Win32 DLL |
Тип MIME: | application/octet-stream |
Тип компьютера: | Intel 386 or later, and compatibles |
Метка времени: | 2017:11:13 10:51:56+00:00 |
Тип PE: | PE32 |
Версия компоновщика: | 6.0 |
Размер кода: | 65536 |
Размер инициализированных данных: | 61440 |
Размер неинициализированных данных: | 0 |
Точка входа: | 0xb0bc |
Версия ОС: | 4.0 |
Версия образа: | 0.0 |
Версия подсистемы: | 4.0 |
Подсистема: | Windows GUI |
✻ Фрагменты данных файлов предоставлены участником Exiftool (Phil Harvey) и распространяются под лицензией Perl Artistic.
Step 2: If recently installed Total Commander (or related software), uninstall then try reinstalling Total Commander software.
You can uninstall Total Commander software by following these instructions (Windows XP, Vista, 7, 8, and 10):
- Hit the Windows Start button
- In the search box, type "Uninstall" and press "ENTER".
- In the search results, find and click "Add or Remove Programs"
- Find the entry for Total Commander 9.2 and click "Uninstall"
- Follow the prompts for uninstallation.
After the software has been fully uninstalled, restart your PC and reinstall Total Commander software.
If this Step 2 fails as well, please proceed to the Step 3 below.
Total Commander 9.2
Ghisler Software GmbH
Шаг 1. Восстановите компьютер до последней точки восстановления, «моментального снимка» или образа резервной копии, которые предшествуют появлению ошибки.
Чтобы начать восстановление системы (Windows XP, Vista, 7, 8 и 10):
Если на этапе 1 не удается устранить ошибку WCMZIP32.DLL, перейдите к шагу 2 ниже.
Читайте также:
- Вэб vga lg g положительный что это значит
- Ваз 2114 не работает спидометр и тахометр и бортовой компьютер
- Где хранятся удаленные файлы на андроиде после удаления сяоми редми
- Сколько концентраторов может присутствовать в сети зоне конфликта fast ethernet по правилам модели 1
- Ибп постоянного тока 24в delta