Rme digiface usb обзор
Is it possible to use more than one of these on one system if more than 4 x ADAT I/O are needed? - This would be 2 x total mix, is this possible?
In theory, yes (provided all sources are synced to one common clock). How well it works will depend on your system. A MADI solution (with an ADI-648 to convert from ADAT to MADI) would be an alternative.
Thanks for mentioning the ADI-648 - So now I'm aware of a madi / adat solution
When was the Digiface USB released? - do you think this will be a product that gets dis-continued without a similar replacement?
It would be great to have an 8 version, cascadable, USB-3 -
I was going to get a Z-Sys toslink patchbay as this will help at some point in the future but now I've found the Digiface USB which could be great to take 8 channels via toslink into another computer (either way)-as a secondary interface / patchbay or just used as an interface on its own.
I've ordered one as I can see the benefits - thanks for the feedback!
Digiface USB was released 01/2017 (see RME startpage, scroll down a little).
@Daniel: are some of the ADI-648 channels configurable to support optical SPDIF protocol ? Didn't find an information in the handbook regarding this.
Back to the Digiface USB: I think its noticeably to mention, that all of the Digiface USB's ADAT channels can be changed to support optical SPDIF which makes this unit quite remarkable in the RME world of interfaces.
Always wondered, why this is genereally not possible for all ADAT ports for interfaces that have more than 1 ADAT port, like i.e. UFX, UFX+, UFX II, RayDAT. There is only one ADAT channel configurable for optical SPDIF. This could be very useful for i.e. converter comparisons in front of a HiFi.
The 648 does not support SPDIF.
OK-thanks for the feedback and.
On the same unit, the RME Digiface USB, if people use this as their main interface, how do people generally configure their main outputs / master outs L & R (stereo).
As the unit is 4 I/O x 8 = 32 I/O it is necessary to use an ADAT I/O box - I've got some! - but generally they only have 16 ins and 16 outs without a dedicated MAIN OUT - so it would be necessary to dedicate 1&2 for example as the master outputs
What would be the best way to do this? (if the unit was used in this way?)
You could connect your main monitors unbalanced to the phones outputs, but then
- this connection is unbalanced and
- you are missing phones outputs
If you need Mic Pres, get an Octamic XTC or OctaMic II and connect them via ADAT.
Useful to know would be if you tell, for what you exactly require the recording interface.
What devices you need to connect.
Do you have Mic Preamps, to be connected via ADAT, etc etc .
Maybe you are better off by taking UC, UCX, 802, UFX II, .. ?!
BTW . what is an "ADAT I/O Box" .
I did see the ADI-2 - and was thinking, are they ASIO compatible? - eg an output in DAW software for the output. or does it just receive the signal from the Digiface USB?
So,by using one of these units I can see where the master outs come from - but as this is 2 channel -(not 8) there would be a 6 channel loss from the output of the Digiface USB (or other similar product like RAYDAT) . - (query)
There are 2-3-or 4 of the AD-2 units, would they all work in the same way? (query pending further reading)-thanks
Digiface USB and ADI-2 Pro are using the same ASIO driver.
So in the DAW you will have direct access to all the channels at once.
You only need to take care to use the same ASIO buffersize on both devices and
to clock sync the devices, i.e. by an ADAT cable.
1 ADAT cable from Digiface USB to ADI-2 Pro. Doesnt matter whether you use ADAT protocol or SPDIF.
In the case of ADAT the ADI-2 Pro can only work with the 1st 2 channels, but it would forward the complete ADAT stream out of its own ADAT port, if required.
By this connection you can get the clock from the Digiface USB.
So set the Digiface USB as clock master and the ADI-2 Pro as slave using clock from ADAT.
The clock signal becomes refreshed at the ADI-2 Pro, so it uses its own clock for highest quality D/A conversion.
If you want to record from the ADI-2 Pro, either directly from the unit connected via USB as well.
Or .. another ADAT cable from ADI-2 Pro to the Digiface USB.
A round solution this way.
There are 2-3-or 4 of the AD-2 units, would they all work in the same way? (query pending further reading)-thanks
ADI-2 Pro / AE .. same unit, AE has different case, more "hifi" look with plexi glass on top to see whats inside and HiFi stands
ADI-2 Pro FS .. same unit, got new circuit to support Femto clock like the ADI-2 DAC.
ADI-2 DAC .. same unit as Pro in terms of D/A conversion quality but
- introduced new FS clock
- with remote control
- instead of 2nd phones output an IEM optimized output
- no digital outputs
- no analog inputs
- no AES
A very nice feature of the ADI-2 Pro / AE / Pro FS is, that you can i.e.
- compare 2 phones side by side and making EQ adjustments to one or both
- you can record with best A/D conversion quality
- you have ADAT or SPDIF I/O optical and AES/EBU and SPDIF coaxial
So .. the ADI-2 FS is better for the studio as it offers you more flexibility there.
The ADI-2 DAC is more for HiFi, stripped down a bit in terms of connections, to be able to sell at a more attractive price point for Home / HiFi users. And of course the remote control for HiFi use (makes perfect sense to be able to make use of dynamic loudness).
Lots of info. here and very quickly - thanks - express.
I'm not a pro but have learned some things over the years and it's always a little strenuous to learn the tech. of new gear but it's getting easier
Hi, this must be my bad explanation.
By ADAT I/O box I mean something with 16 analog inputs as well as 16 analog inputs - with 2 ADAT x optical inputs & 2 x ADAT optical outputs = ADAT I/O box.
Hi, this must be my bad explanation.
By ADAT I/O box I mean something with 16 analog inputs as well as 16 analog inputs - with 2 ADAT x optical inputs & 2 x ADAT optical outputs = ADAT I/O box.
I think in your case the ADI-8 DS MK3 would be a good choice or
if you want also to have the flexibility of MADI then the ADI 8 QS.
The M32 is also available in an 16 IN/OUT configuration, but you would require one device for pure AD and one for pure DA.
This would require in total 4 Rack Units.
So maybe better take the devices which require only 1 RU per 8 analog channels IN/OUT.
If you really need 16 analog channels in and out, then it could be an advantage to you,
to get a better recording interface which already has 8 analog channels IN and OUT
and on top of that offers to you more features compared to the Digiface USB,
like i.e. autoset, Durec and you would have on top of that 4 cool Mic Pres.
This would save you to take 2x ADI-8 DS, then you would need only one !
With this setup you have 8x Analog IN and OUT already in the UFX II ..
Then you need only one ADI-8 DS MK3 to expand this to additional 8 analog INs and OUTs
And on top the ADI-2 Pro FS for best AD/DA conversion for near field monitors and phones.
Additionally the UFX+ would have the advantage to support USB3 and thunderbolt towards the PC.
And for PCs only offering an USB2 port you could even operate it with USB2,
then all channels but the MADI channels would work.
Then you could still connect the ADI-8 QS via ADAT.
MADI has the additional advantage to allow you remote controlling the devices.
Then you have this only one fibre cable and you can use MIDI over MADI to remote control them.
If you want to record with 96 kHz, easy, then MADI supports up to 32 channels still .
And you still need only one fibre cable which can become very long.
With ADAT you are running out of channels with higher sample rates more quickly and the TOSLINK cables are limited to 15-20m.
It would be extremely helpful if you could tell, what your budget is and what you need to achieve with this budget.
-Do you have any preference for PCIe Bus or USB bus based equipment ?
- Do you need to connect AD/DA converter via ADAT with 16 channels? Existing ones or do you want to get some from RME ?
- Are you recording mainly with 44.1/48 or do you also need higher sample rates like 96kHz (or even 192kHz which I doubt).
- What about my comments in regards to a MADI based solution ?
- Do you want to integrate an ADI-2 Pro FS ?
Please tell more about your requirement / surrounding conditions so that this doesnt become a long thread "stepping in the dark" ..
I see you opened now 2 other threads asking about this and that . and tbh .. I do not see a structure in it.
One example: if you really want to connect 16 channel AD/DA converter, then you need a minimum 2 ADAT ports IN and OUT.
If you want to record with 88.2/96 kHz then you need even 4 ADAT ports IN/OUT.
Why you ask then in another thread about an HDSPe AIO card, which has only one ADAT port ?
This makes absolutely no sense.
And if you want to integrate an ADI-2 Pro then you even need an additional free ADAT, SPDIF or AES port.
Therefore I tried to bring your attention to a MADI based solution where you have 64 channels @44.1/48, 32 channels @88.2/96 and still 16 channels @up to 192 kHz. But of course we are talking about costs.
I tried to optimize your costs already by suggestion to take an UFX II or even UFX+ (for MADI) so that you have already 8 analog I/O in the box and require only one additional AD/DA converter.
But this is all stepping in the dark if I see other threads where you ask about this AIO card with only one ADAT port.
So please be more concrete about your real requirements and your budget limitations.
Otherwise its not possible to find a good solution for you. Thanks for your cooperation.
Вы используете устаревший браузер. Этот и другие сайты могут отображаться в нём некорректно.
Вам необходимо обновить браузер или попробовать использовать другой.
Vladimir74
Well-Known Member
Натолкнулся на рекламу этого прибора. Как я понял что это аудиоинтерфейс без своих АЦП и к нему можно подключить по ADAT четыре внешних восьмиканальных преампа и все это хозяйство рулить через TotalMix? Кто пользуется такой конфигурацией? Как оно работает? Заранее спасибо.
andy felon
Well-Known Member
@Vladimir74, Саша Олейник использует, даже на лайвах, так что все там хорошо работает
да все рулится через тотал микс
Vladimir74
Well-Known Member
Это же можно несколько интерфейсов типа ADA8200 подключить к digiface и получить многоканальную систему записи. За умеренную цену.
dr-music
Well-Known Member
Это не бросается в глаза, а потому на всякслуч напишу: у этого интерфейса нет встроенного DSP и, соответственно, своих FX. Все возможности роутинга TotalMix в наличии, но ревер певцу в уши — только через ASIO.
Если это известно, то ОК.
Vladimir74
Well-Known Member
Vladimir74
Well-Known Member
Well-Known Member
@Vladimir74, эквалайзер только из эффектов.
Упс, это я из темы BF Pro перескочил случайно) У Digiface никаких эффектов нет, чисто микс.
Well-Known Member
Vladimir74
Well-Known Member
То есть, динамическая обработка и эквалайзер при записи невозможны? FX имеется в виду пространственная обработка?
Well-Known Member
FX - эффекты, не считая панорамы и уровня.
Billion
Member
Это не бросается в глаза, а потому на всякслуч напишу: у этого интерфейса нет встроенного DSP и, соответственно, своих FX. Все возможности роутинга TotalMix в наличии, но ревер певцу в уши — только через ASIO.
Если это известно, то ОК.
Скажите пожалуйста, а что такое dsp? И можно ли диджифейс считать саунд картой в связке к примеру с ада8200?
dr-music
Well-Known Member
Я из тех неучей, которые не знают, чем отличается звуковая карта от аудио-интерфейса (равно как чем отличается дисплей от монитора). Кто-то другой пусть ответит. И я не владелец RME (пока).
Well-Known Member
Billion
Member
Я из тех неучей, которые не знают, чем отличается звуковая карта от аудио-интерфейса (равно как чем отличается дисплей от монитора). Кто-то другой пусть ответит. И я не владелец RME (пока).
Вы используете устаревший браузер. Этот и другие сайты могут отображаться в нём некорректно.
Вам необходимо обновить браузер или попробовать использовать другой.
digilab2
Well-Known Member
такой же как и у всех рме , я им мало пользуюсь( тотал миксом, один раз там настроил все под мои нужды и больше не трогаю)
этот интерфейс у меня для проверки цап ацп, взял после того как lynx aes16 начал барахлить , точнее не барахлить а драйвера
слетели а где они у нас были копиями не нашли , на самом lynx таких не оказалось уже ( у нас еще старый вариант под pci) по
сети полазили тоже безрезультатно
belovw
Well-Known Member
Guslyar
Well-Known Member
Guslyar
Well-Known Member
У меня digiface + ada 8200 и adc digilab-овский. Мне нра.
Когда много миков пишу через ada, солиста через digilab.
digilab2
Well-Known Member
- альтернативы еще дороже , я то его брал еще за 13000р по моему или что-то в этом роде , сейчас конечно
не стал бы покупать т.к мне вполне хватает usbstreamer от minidsp там 10х10 каналов с простеньким микшерком
либо адат 8х8 , платка размером 6 на 4см стоит примерно 100$
belovw
Well-Known Member
Guslyar
Well-Known Member
Well-Known Member
belovw
Well-Known Member
baloo
Distor-Dreamer
Вы можете сделать тест задержек в связке Digiface + ADA8200? на 44100 и 96000 в той же ObliqueAudio RTL Utility?
Guslyar
Well-Known Member
baloo
Distor-Dreamer
да я чет попутал) адаты до 48, ну тогда 44100 и 48000 от 16 сэмплов) было бы очень полезно, потому как решающий фактор для смены интерфейса. а так брать кота в мешке по задержкам не хочется
electrical
Well-Known Member
да я чет попутал) адаты до 48, ну тогда 44100 и 48000 от 16 сэмплов) было бы очень полезно, потому как решающий фактор для смены интерфейса. а так брать кота в мешке по задержкам не хочется
Ну есть smux адаты, с кратным снижению каналов повышением частоты сэмплирования, но это не про 8200. На ГС был топик, который поддержал один из разработчиков девайса, подтвердив, что 48к - это максимум
Aleksandr Oleynik
Well-Known Member
digilab2
Well-Known Member
baloo
Distor-Dreamer
я это понимаю) мне для утилитарных задач поэтому 48 потолок и выше не смотрел.
На самом деле имея Element +ada8200, каналов всего 10 i/o. Этого мало. Задача сменить сетап на более гибкий по числу каналов. и бюджетно не в потерю задержкам, и приемлемые входы (если будут)
Собственно я в поиске USB/TB3 карты с желательно числом каналов на борту около 8 и как минимум 2мя адатами подключаемыми, причем задержки желательны минимальные.
Пока прикидываю есть 500-650 евро. Тут попадает конкретно в тему:
- Digiface USB (задержки в тандеме 8200 попросту неизвестны) Потому в тему и обратился. Дрова вроде под мак М1 есть но отзывов толком не нашел.
- PreSonus quantum 2626 (8 каналов + 2 адата) за 500 евро. Дров под мак м1 нет)
- МОТУ.. тут как то боюсь, слышал всякое про моту
- audient id44 задержки вроде не оч хорошие
Well-Known Member
Искать отзывы именно на это устройство не стоит - просто смотрите отзывы по их юсб дивайсам. Дрова типовые.
LexaSpa
New Member
Well-Known Member
@LexaSpa, не сталкивался с пресонусом, но сдается мне, что этот штайни, без какого-либо ущерба, можно заменить практически всем, чем угодно. Ну а rme, как интерфейс, - вне конкуренции.
The latest Plug and Play technology guarantees a simple installation, even for the inexperienced user. Numerous unique features as well as RME's robust drivers enable a quick, efficient and comfortable operation of the Digiface USB. Its small size, weight and bus-powered operation make the Digiface USB extremely versatile and useful. It could even serve as simple headphone amp for mobile use.
DigiCheck - Test, Measurement and Analysis Tool for Mac & Windows
The Interface comes with RME's unique software tool box for metering, testing, measuring and analyzing digital audio streams. On Mac OS X provides unique functions and features of the spectral analysis of the data calculated in hardware level right through to sophisticated multi-channel level meter. On Windows, an additional multi-track recorder and the display of playback data from an audio software are also available.
Немецкая компания RME анонсировала пополнение линейки аудиоинтерфейсов RME DIGIFACE SERIES в лице звуковых карт RME DIGIFACE AVB, которая поддерживает стандарт AVB (Audio Video Bridging) и позволяет передавать информацию по 256 сетевым каналам в рамках гигабитной сети, и RME DIGIFACE DANTE, предлагащую возможность работы с 64 Dante/MADI-каналами через USB 3.0.
RME DIGIFACE DANTE - портативный аудиоинтерфейс, работающий по шине USB или от внешнего источника питания, поддерживает работу по протоколу Dante (Audio-over-IP), разработанному австралийской компанией AUDINATE для передачи на большие расстояния несжатого цифрового аудиосигнала с минимальной задержкой и без потерь в качестве. Чтобы поддержать распространение нового протокола на рынке профессиональной аудиоаппаратуры, RME оснастила DIGIFACE DANTE всеми соответствующими технологиями, которые позволят передавать аудиосигнал в любых условиях.
RME DIGIFACE DANTE совместим с MADI-драйверами для Windows и macOS X и позволяет передавать информацию с 64 MADI-каналов через USB 3.0 (в дополнение к 64 Dante-каналам). Аудиоинтерфейс оснащен специальным переключателем, который переключает сокеты с Word Clock I/O на MADI I/O. Каждым из 128 каналов можно управлять с помощью специального программного обеспечения Dante и DSP-микшера RME TotalMix FX, открывающим доступ к широким возможностям маршрутизации и мониторинга сигнала. В дополнение к этому, TotalMix FX позволяет создавать независимые суб-миксы.
RME DIGIFACE DANTE оснащен двумя сетевыми многофункциональными портами, которые могут использоваться в качестве входов, выходов или сетевых свитчей. Кроме того, интерфейс можно использовать в роли портативного 64-канального преобразователя Dante/MADI, а выход для наушников можно использовать в качестве линейного выхода для передачи аналогового стереомикса.
С выпуском RME DIGIFACE AVB, производитель RME фокусируется на аудиосетевых технологиях. Мобильный аудиоинтерфейс, питающийся от шины USB, использует открытый протокол IEEE 802.1 как часть стандарта AVB, который позволяет передавать аудиоинформацию по гигабитной сети. Особенности аудиоинтерфейса и поддерживаемых технологий позволяют передавать информацию со 128 каналов в AVB-сеть или на компьютер с частотой дискретизации до 192 кГц. Чтобы обеспечить максимальную совместимость с уже представленными на рынке AVB-интерфейсами, пользователи могут выбирать количество каналов в каждом потоке.
В дополнение к Gigabit Ethernet и USB 3.0, RME DIGIFACE AVB также оснащается портом Word Clock I/O и выходом на наушники, которые обеспечивают повышенное удобство мониторинга передаваемого сигнала. Аудиоинтерфейс поставляется вместе с набором специального программного обеспечения и контроллером AVDECC, который находит в сети все AVB совместимые устройства и позволяет управлять входящими и исходящими потоками данных.
Flexible Mixing & Routing with TotalMix
Like all the latest RME interfaces, the Digiface USB also includes the powerful digital real-time mixer TotalMix FX. It allows for practically unlimited mixing and routing operations, with all inputs and playback channels simultaneously, to any hardware outputs. The Digiface USB does not have a DSP, so there are no FX available. Still it includes a dedicated Control Room section with Talkback, Main/Phones, fader groups, mute groups, complete remote controllability via Mackie or OSC protocol, and much more.
Compact, portable and lightweight Audio Interface
The Digiface USB is an extremely compact & portable digital audio interface with 4 optical ADAT / SPDIF I/Os, and an analog high-quality line/phones output via 6.3 mm TRS jack. Continuing the legacy of RME‘s famous HDSP Digiface, a triple ADAT I/O interface with phones and PCI interface, Digiface USB simplifies connection with USB 2, does not need an external power supply, and even adds another optical I/O, resulting in 32 channels input and output each when using ADAT optical.
The analog output hosts channels 33/34, and can be used freely thanks to TotalMix FX, RME‘s routing and monitoring solution that knows nearly no limits in routing and mixing (the Digiface USB does not include FX).
Each single optical port can use either ADAT (up to 8 channels) or SPDIF (stereo). While the inputs adapt automatically to the received signal format, the outputs can be individually switched between ADAT and SPDIF operation. Supported are SMUX and SMUX4. Therefore at 192 kHz either 8 channels via 4 x SPDIF or ADAT are possible on both inputs and outputs.
Connectivity and Features
1 x Phones Output
DC-coupled Outputs (Phones)
Here are some typical applications for TotalMix:
- Setting up delay-free submixes (headphone mixes). The Digiface USB allows for up to 17 fully independent stereo submixes. On an analog mixing desk, this would equal 34 Aux sends.
- Unlimited routing of inputs and outputs (free utilisation, patchbay functionality).
- Distributing signals to several outputs at a time. TotalMix offers state-of-the-art splitter and distributor functions.
- Simultaneous playback of different programs via a single stereo output. The ASIO multiclient driver supports the usage of several programs at the same time. When done on different playback channels TotalMix provides the means to mix and monitor these on a single stereo output.
- Mixing of the input signal to the playback signal (complete ASIO Direct Monitoring). RME not only is the pioneer of ADM, but also offers the most complete implementation of the ADM functions.
- Integration of external devices. Use TotalMix to insert external effects devices, be it in the playback or in the record path. Depending on the current application, the functionality equals insert or effects send and effects return, for example as used during real-time monitoring when adding some reverb to the vocals.
Every single input channel, playback channel and hardware output features a Peak and RMS level meter, calculated in hardware. These level displays are very useful to determine the presence and routing destinations of the audio signals.
Читайте также: