Raw file converter ex powered by silkypix обзор
это группа ЧКФР, объединенных общими интересами (не глобального, а локального характера), которым необходима отдельная площадка для их обсуждения.
Создать сообщество может любой ЧКФР, состоящий в клубе не менее полугода.
Любой ЧКФР может вступить в любое сообщество или в несколько сообществ одновременно. Членство в сообществе позволяет участвовать в обсуждении тем сообщества.
Чтобы вступить в уже существующее сообщество, нужно зайти в это сообщество и нажать кнопку «Вступить в сообщество».
Вступление в сообщество происходит автоматически без одобрения кандидатуры вступающего другими членами сообщества.
Обращайтесь в Fujifilm Ну или в Ichikawa Soft Laboratory
[quot]The software update Ver.4.1.0.0 incorporates the following issues:
FILM SIMULATION function is added to RAW FILE CONVERTER EX 2.0 powered by SILKYPIX.
Applicable Models:FUJIFILM X-T1 / X-T1 Graphite Silver Edition / X-A2 / X100T / X30 / XQ2[/quot]
Можно попробовать качнуть файл от Х-Т1, применить профиль плёнки и сохранить как собственный вкус (как они это называют). По идее должны в следующих версиях другие камеры подключить
а у Е2 та же матрица и профили, я их не вижу. можно как то их вставить?
. и ещё хотел спросить а как тени тянуть?
Обращайтесь в Fujifilm Ну или в Ichikawa Soft Laboratory
[quot]The software update Ver.4.1.0.0 incorporates the following issues:
FILM SIMULATION function is added to RAW FILE CONVERTER EX 2.0 powered by SILKYPIX.
Applicable Models:FUJIFILM X-T1 / X-T1 Graphite Silver Edition / X-A2 / X100T / X30 / XQ2[/quot]
Можно попробовать качнуть файл от Х-Т1, применить профиль плёнки и сохранить как собственный вкус (как они это называют). По идее должны в следующих версиях другие камеры подключить
[quot]Можно попробовать качнуть файл от Х-Т1, применить профиль плёнки и сохранить как собственный вкус (как они это называют). [/quot] - не, похоже не работает
На самом деле более, чем достаточно, просто алгоритм не такой, как в других конверторах. Для начала выставляйте контраст центр, потом контраст, гамму и уровень черного. Если нужно, можно подключить закладку HDR. С картинкой можно сделать все, что угодно, возможностей коррекции не меньше, чем в лайтруме.
This software is made by “Ichikawa Soft Laboratory”. When you install it, you need to accept “Ichikawa Soft Laboratory License Agreement”.
* Support for the RAW FILE CONVERTER EX or RAW FILE CONVERTER EX2.0 powered by SILKYPIX has been discontinued. This software can be used with models that are compatible with the old RAW FILE CONVERTER EX or RAW FILE CONVERTER EX2.0.
Regarding install software
*If you have a inquiry, please contact your local FUJIFILM support center or through “Contact US” below.
*This software is made by “Ichikawa Soft Laboratory”. When you install it, you need to accept “Ichikawa Soft Laboratory License Agreement”.
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
это группа ЧКФР, объединенных общими интересами (не глобального, а локального характера), которым необходима отдельная площадка для их обсуждения.
Создать сообщество может любой ЧКФР, состоящий в клубе не менее полугода.
Любой ЧКФР может вступить в любое сообщество или в несколько сообществ одновременно. Членство в сообществе позволяет участвовать в обсуждении тем сообщества.
Чтобы вступить в уже существующее сообщество, нужно зайти в это сообщество и нажать кнопку «Вступить в сообщество».
Вступление в сообщество происходит автоматически без одобрения кандидатуры вступающего другими членами сообщества.
RAW DATA PHOTOGRAPHY
Did you know when people take pictures, they interpret each scene slightly different? Because everyone's perspective of images in photographs is different, using SILKYPIX® Developer Studio to adjust the color, tone, and the white balance of the image can truly help you express your feelings through the photography. "SILKYPIX®" RAW development engine brings your memories to life. "Make your special moments your special memories."
Вроде картинка ничего, но интерфейс и настройки. На лоха.
[quot]но интерфейс и настройки. [/quot]
а что не так?
[quot]
Вот я понимаю Pixmantec Raw Shooter - все цивильно, полноценная халявная версия форэва, чуть лучше и с наворотами - пжалста за деньги, а тут. [/quot]
и тут тоже самое
вот отзывы тех, кто разобрался немного с Силки (из другого форума)
Силки быстрее С1Pro и картинка более красивая,
нет грубого шарпа С1 и с тенями он интереснее работает
Я вчера скачал БибблеПро - жутко тормозит при работе, всё медленно.
Теперь я владелец 6 конвертеров:
БибблеПро
Родного Минолтовского
РавШутер
СилкиПикс
С1
Встроенного в ФШ-8
Из всех реально юзаю именно СилкиПикс, остальные отмёл.
А в целом мне Силки больше всего понравился. Других конвертеров мне всегда не хватало, обязательно потом что-то подправлял в Фотошопе. Если в Силки еще и со светами разберусь наверное полностью перейду на съемку в РАВ.
Не лоховство, даже нормальной активации триала не могли сделать, гады, хоть полноценно попробовать.
Вроде картинка ничего, но интерфейс и настройки. На лоха.
Вот я понимаю Pixmantec Raw Shooter - все цивильно, полноценная халявная версия форэва, чуть лучше и с наворотами - пжалста за деньги, а тут.
Нормально активируется в триале. Получаем полностью рабочаю версию на 14 дней. И затем лечим каждые 14 дней.
Facebook Если у вас не работает этот способ авторизации, сконвертируйте свой аккаунт по ссылке ВКонтакте Google RAMBLER&Co ID
Авторизуясь в LiveJournal с помощью стороннего сервиса вы принимаете условия Пользовательского соглашения LiveJournal
Продолжаю мучить конвертер Silkypix. Всё же его разработчики, в отличие от разработчиков других конвертеров, очевидно, получили дополнительную информацию об особенностях хитрой матрицы Fujifilm F550EXR, поскольку результаты обработки им явно лучше, чем конвертерами конкурентов. Неспроста вместе с фотоаппаратом идёт облегчённая версия именно этого конвертера.
Ниже выкладываю три фотографии, обработанные внутри камеры, в фотошопе и в raw-конвертере. Возможно, я просто не умею пользоваться фотошопом, но результат в нём хуже, а возился там дольше.
Фото непосредственно из камеры:
Фото из камеры, обработанное в фотошопе. Вытянуть цвет неба не удалось, ибо вытягиваю синь - уезжает зелень. Также при вытягивании светов появляется кайма вокруг веток:
Фото из RAW-файла, обработанное в конвертере Silkypix. Небо легко вытянулось, каймы нет, просто праздник какой-то:
Фото из RAW-файла, обработанное в конвертере Silkypix с учётом замечаний Сatslover. ДД в раздвинут в тени до естественного:
Не сомневаюсь, что при обильном труде можно было бы добиться того же и в фотошопе, но не уверен, что при этом не съелась бы какая-нибудь малозаметная на первый взгляд информация, и не пришлось бы что-нибудь дорисовывать.
System Requirements
OS | Windows 11(×64), Windows 10 (x86/x64), Windows 8.1 (x86/x64) |
---|
System Requirements
OS | Windows 11(×64), Windows 10 (x86/x64), Windows 8.1 (x86/x64) |
---|
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
This software is made by “Ichikawa Soft Laboratory”. When you install it, you need to accept “Ichikawa Soft Laboratory License Agreement”.
* Support for the RAW FILE CONVERTER EX or RAW FILE CONVERTER EX2.0 powered by SILKYPIX has been discontinued. This software can be used with models that are compatible with the old RAW FILE CONVERTER EX or RAW FILE CONVERTER EX2.0.
Notes
- The speaification of the software can be changed without notice.
- FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Detail of the software update
The software update Ver.8.1.10.0 incorporates the following issue:
Applicable models for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" are added.
Applicable Model : FUJIFILM GFX 50S II,X-T30 II
The software update Ver.8.1.9.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100 Ver.4.00
(Compatibility with FILM SIMULATION > CLASSIC Neg. is added.)
The software update Ver.8.1.8.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100S, X-E4
Fix of slight defects.
The software update Ver.8.1.7.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-S10
The software update Ver.8.1.6.0 incorporates the following issues:
Compatibility with the new Film Simulation below intorduced to GFX100, GFX50S and GFX50R is added.
1)CLASSIC Neg (GFX100, GFX50S and GFX50R)
2)ETERNA/CINEMA (GFX50S and GFX50R. Already available in GFX100.)
3)ETERNA Bleach Bypass (GFX100)
Compatibility with RECORDING TYPE (COMPRESSED) in RAW RECORDING is added. (GFX100)
The software update Ver.8.1.5.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-T4
The software update Ver.8.1.4.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-Pro3, X100V
The software update Ver.8.1.3.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-Pro3
The software update Ver.8.1.2.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-A7
The software update Ver.8.1.1.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100
The software update Ver.8.1.0.0 incorporates the following issue:
The sign to show that the software is provided by ”Ichikawa Soft Laboratory” is displayed on the background of the RFC EX3.0.
The software update Ver.8.0.2.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-T30
Fix of slight defects.
The software update Ver.8.0.1.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX 50R
Regarding install software
*If you have a inquiry, please contact your local FUJIFILM support center or through “Contact US” below.
*This software is made by “Ichikawa Soft Laboratory”. When you install it, you need to accept “Ichikawa Soft Laboratory License Agreement”.
Detail of the software update
The software update Ver.8.1.10.0 incorporates the following issue:
Applicable models for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" are added.
Applicable Model : FUJIFILM GFX 50S II,X-T30 II
The software update Ver.8.1.9.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100 Ver.4.00
(Compatibility with FILM SIMULATION > CLASSIC Neg. is added.)
The software update Ver.8.1.8.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100S, X-E4
Compatibility with macOS11 Big Sur is added. (Rosetta 2)
Fix of slight defects.
The software update Ver.8.1.7.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-S10
The software update Ver.8.1.6.0 incorporates the following issues:
Compatibility with the new Film Simulation below intorduced to GFX100, GFX50S and GFX50R is added.
1)CLASSIC Neg (GFX100, GFX50S and GFX50R)
2)ETERNA/CINEMA (GFX50S and GFX50R. Already available in GFX100.)
3)ETERNA Bleach Bypass (GFX100)
Compatibility with RECORDING TYPE (COMPRESSED) in RAW RECORDING is added. (GFX100)
The software update Ver.8.1.5.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-T4
Compatibility with Mac OS is from OS X v10.9 to macOS 10.15.
The software update Ver.8.1.4.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-T200, X100V
The software update Ver.8.1.3.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-Pro3
Compatibility with ”macOS 10.15 (Catalina)” is added.
If you use a PC with “macOS 10.15 (Catalina)”, install the latest version(8.1.3.0) of the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX”.
The software update Ver.8.1.2.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-A7
The software update Ver.8.1.1.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100
The software update Ver.8.1.0.0 incorporates the following issue:
The sign to show that the software is provided by ”Ichikawa Soft Laboratory” is displayed on the background of the RFC EX3.0.
The software update Ver.8.0.2.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added. Applicable Model : FUJIFILM X-T30
Fix of slight defects.
The software update Ver.8.0.1.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX 50R
Compatibility with “macOS Mojave” is added.
If you use a PC with “macOS Mojave”, install the latest version(8.0.1.0) of the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX”.
Regarding install software
*If you have a inquiry, please contact your local FUJIFILM support center or through “Contact US” below.
*This software is made by “Ichikawa Soft Laboratory”. When you install it, you need to accept “Ichikawa Soft Laboratory License Agreement”.
How to Install
- Download the dmg file from this page.
- Double click the downloaded dmg file to mount the volume and the volume will be displayed.
- Double-click the installer app to run setup. Install it following directions appeared on dialogs.
- Once the installation is completed, click “Complete” button in the dialog appeared.
Notes
Regarding install software
*If you have a inquiry, please contact your local FUJIFILM support center or through “Contact US” below.
*This software is made by “Ichikawa Soft Laboratory”. When you install it, you need to accept “Ichikawa Soft Laboratory License Agreement”.
How to Install
- Download the exe file from this page.
- Double click the downloaded exe file to run setup. Install it following directions appeared on dialogs.
- Once the installation is completed, click “Complete” button in the dialog appeared.
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
- In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
- In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
Download
Notes
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
- In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
- In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
Detail of the software update
The software update Ver.8.1.10.0 incorporates the following issue:
Applicable models for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" are added.
Applicable Model : FUJIFILM GFX 50S II,X-T30 II
The software update Ver.8.1.9.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100 Ver.4.00
(Compatibility with FILM SIMULATION > CLASSIC Neg. is added.)
The software update Ver.8.1.8.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100S, X-E4
Compatibility with macOS11 Big Sur is added. (Rosetta 2)
Fix of slight defects.
The software update Ver.8.1.7.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-S10
The software update Ver.8.1.6.0 incorporates the following issues:
Compatibility with the new Film Simulation below intorduced to GFX100, GFX50S and GFX50R is added.
1)CLASSIC Neg (GFX100, GFX50S and GFX50R)
2)ETERNA/CINEMA (GFX50S and GFX50R. Already available in GFX100.)
3)ETERNA Bleach Bypass (GFX100)
Compatibility with RECORDING TYPE (COMPRESSED) in RAW RECORDING is added. (GFX100)
The software update Ver.8.1.5.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-T4
Compatibility with Mac OS is from OS X v10.9 to macOS 10.15.
The software update Ver.8.1.4.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-T200, X100V
The software update Ver.8.1.3.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-Pro3
Compatibility with ”macOS 10.15 (Catalina)” is added.
If you use a PC with “macOS 10.15 (Catalina)”, install the latest version(8.1.3.0) of the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX”.
The software update Ver.8.1.2.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-A7
The software update Ver.8.1.1.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100
The software update Ver.8.1.0.0 incorporates the following issue:
The sign to show that the software is provided by ”Ichikawa Soft Laboratory” is displayed on the background of the RFC EX3.0.
The software update Ver.8.0.2.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added. Applicable Model : FUJIFILM X-T30
Fix of slight defects.
The software update Ver.8.0.1.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX 50R
Compatibility with “macOS Mojave” is added.
If you use a PC with “macOS Mojave”, install the latest version(8.0.1.0) of the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX”.
System Requirements
How to Install
- Download the exe file from this page.
- Double click the downloaded exe file to run setup. Install it following directions appeared on dialogs.
- Once the installation is completed, click “Complete” button in the dialog appeared.
Download
Notes
- The speaification of the software can be changed without notice.
- FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Download
Download
Notes
- The speaification of the software can be changed without notice.
- FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Detail of the software update
The software update Ver.8.1.10.0 incorporates the following issue:
Applicable models for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" are added.
Applicable Model : FUJIFILM GFX 50S II,X-T30 II
The software update Ver.8.1.9.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100 Ver.4.00
(Compatibility with FILM SIMULATION > CLASSIC Neg. is added.)
The software update Ver.8.1.8.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100S, X-E4
Fix of slight defects.
The software update Ver.8.1.7.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-S10
The software update Ver.8.1.6.0 incorporates the following issues:
Compatibility with the new Film Simulation below intorduced to GFX100, GFX50S and GFX50R is added.
1)CLASSIC Neg (GFX100, GFX50S and GFX50R)
2)ETERNA/CINEMA (GFX50S and GFX50R. Already available in GFX100.)
3)ETERNA Bleach Bypass (GFX100)
Compatibility with RECORDING TYPE (COMPRESSED) in RAW RECORDING is added. (GFX100)
The software update Ver.8.1.5.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-T4
The software update Ver.8.1.4.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-Pro3, X100V
The software update Ver.8.1.3.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-Pro3
The software update Ver.8.1.2.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-A7
The software update Ver.8.1.1.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX100
The software update Ver.8.1.0.0 incorporates the following issue:
The sign to show that the software is provided by ”Ichikawa Soft Laboratory” is displayed on the background of the RFC EX3.0.
The software update Ver.8.0.2.0 incorporates the following issues:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM X-T30
Fix of slight defects.
The software update Ver.8.0.1.0 incorporates the following issue:
Applicable model for the "RAW FILE CONVERTER EX 3.0 powered by SILKYPIX" is added.
Applicable Model : FUJIFILM GFX 50R
System Requirements
Notes
- The speaification of the software can be changed without notice.
- FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
How to Install
- Download the dmg file from this page.
- Double click the downloaded dmg file to mount the volume and the volume will be displayed.
- Double-click the installer app to run setup. Install it following directions appeared on dialogs.
- Once the installation is completed, click “Complete” button in the dialog appeared.
Читайте также: