Mysql не удается найти указанный файл
This section provides troubleshooting suggestions for problems starting the server. For additional suggestions for Windows systems, see Section 2.3.5, “Troubleshooting a Microsoft Windows MySQL Server Installation”.
If you have problems starting the server, here are some things to try:
Check the error log to see why the server does not start. Log files are located in the data directory (typically C:\Program Files\MySQL\MySQL Server 8.0\data on Windows, /usr/local/mysql/data for a Unix/Linux binary distribution, and /usr/local/var for a Unix/Linux source distribution). Look in the data directory for files with names of the form host_name .err and host_name .log , where host_name is the name of your server host. Then examine the last few lines of these files. Use tail to display them:
Specify any special options needed by the storage engines you are using. You can create a my.cnf file and specify startup options for the engines that you plan to use. If you are going to use storage engines that support transactional tables ( InnoDB , NDB ), be sure that you have them configured the way you want before starting the server. If you are using InnoDB tables, see Section 15.8, “InnoDB Configuration” for guidelines and Section 15.14, “InnoDB Startup Options and System Variables” for option syntax.
Although storage engines use default values for options that you omit, Oracle recommends that you review the available options and specify explicit values for any options whose defaults are not appropriate for your installation.
Make sure that the server knows where to find the data directory. The mysqld server uses this directory as its current directory. This is where it expects to find databases and where it expects to write log files. The server also writes the pid (process ID) file in the data directory.
The default data directory location is hardcoded when the server is compiled. To determine what the default path settings are, invoke mysqld with the --verbose and --help options. If the data directory is located somewhere else on your system, specify that location with the --datadir option to mysqld or mysqld_safe , on the command line or in an option file. Otherwise, the server does not work properly. As an alternative to the --datadir option, you can specify mysqld the location of the base directory under which MySQL is installed with the --basedir , and mysqld looks for the data directory there.
To check the effect of specifying path options, invoke mysqld with those options followed by the --verbose and --help options. For example, if you change location to the directory where mysqld is installed and then run the following command, it shows the effect of starting the server with a base directory of /usr/local :
You can specify other options such as --datadir as well, but --verbose and --help must be the last options.
Once you determine the path settings you want, start the server without --verbose and --help .
If mysqld is currently running, you can find out what path settings it is using by executing this command:
host_name is the name of the MySQL server host.
Make sure that the server can access the data directory. The ownership and permissions of the data directory and its contents must allow the server to read and modify them.
If you get Errcode 13 (which means Permission denied ) when starting mysqld , this means that the privileges of the data directory or its contents do not permit server access. In this case, you change the permissions for the involved files and directories so that the server has the right to use them. You can also start the server as root , but this raises security issues and should be avoided.
Change location to the data directory and check the ownership of the data directory and its contents to make sure the server has access. For example, if the data directory is /usr/local/mysql/var , use this command:
If the data directory or its files or subdirectories are not owned by the login account that you use for running the server, change their ownership to that account. If the account is named mysql , use these commands:
Even with correct ownership, MySQL might fail to start up if there is other security software running on your system that manages application access to various parts of the file system. In this case, reconfigure that software to enable mysqld to access the directories it uses during normal operation.
Verify that the network interfaces the server wants to use are available.
If either of the following errors occur, it means that some other program (perhaps another mysqld server) is using the TCP/IP port or Unix socket file that mysqld is trying to use:
Use ps to determine whether you have another mysqld server running. If so, shut down the server before starting mysqld again. (If another server is running, and you really want to run multiple servers, you can find information about how to do so in Section 5.8, “Running Multiple MySQL Instances on One Machine”.)
If no other server is running, execute the command telnet your_host_name tcp_ip_port_number . (The default MySQL port number is 3306.) Then press Enter a couple of times. If you do not get an error message like telnet: Unable to connect to remote host: Connection refused , some other program is using the TCP/IP port that mysqld is trying to use. Track down what program this is and disable it, or tell mysqld to listen to a different port with the --port option. In this case, specify the same non-default port number for client programs when connecting to the server using TCP/IP.
Another reason the port might be inaccessible is that you have a firewall running that blocks connections to it. If so, modify the firewall settings to permit access to the port.
If the server starts but you cannot connect to it, make sure that you have an entry in /etc/hosts that looks like this:
If you cannot get mysqld to start, try to make a trace file to find the problem by using the --debug option. See Section 5.9.4, “The DBUG Package”.
Ответы 2
Я столкнулся с той же проблемой; Судя по всему, после выключения моего сервера я больше не мог его запустить.
Сам Сервер был установлен как служба, по умолчанию названная «mysql». Я не помню, как переименовал его во что-то другое, поэтому мне не удалось запустить нужную службу.
- Запустить cmd
- Перейдите в папку «C: \ Program Files \ MySQL \ MySQL Server 5.6 \ bin».
- введите mysqld --install
СПОСОБ №1: Доступ к установленной службе
Откройте приложение «Службы» на панели управления и Прокрутите в алфавитном порядке до службы MySQL:
Щелкните правой кнопкой мыши службу Нажмите Start Service.
СПОСОБ №2: Выполнение командной строки
Откройте окно DOS из приглашения C: и запустите следующее:
net start mysql или net start mysql57 . Правильное имя может варьироваться в вашей системе
Для получения дополнительной информации об установке или удалении сервиса проверьте документы MySQL.
На самом деле есть два способа запустить сервер без требования графического интерфейса.
Маленькое Мин яблоко
Запрос разбивки на базы данных Oracle
Например, есть такая таблица Я хочу узнать данные 3-6 Также может быть так.
Весенняя загрузка + Vue Все развитие стека делает что-то внешнее знание?
Добрый день. У меня есть база данных mysql, и я пытаюсь подключить ее к vb.net в visual studio, но выходит исключение: System.TypeInitializationException: "The type initializer for 'MySql.Data.MySqlClient.MySqlConnectAttrs' threw an exception." FileNotFoundException: Could not load file or assembly 'System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'. Не удается найти указанный файл.
Не работает подключение к БД: Unable to connect to any of the specified mysql hosts
Не пойму, почему не работает подключение к бд. using System; using System.Collections.Generic;.
RDO подключение к MySQL - как узнать, было ли установлено подключение
сделал подключение через rdo используя драйвер - odbc connector mysql 3.51 пример: Dim conn As.
karlik1337, настройте архитектуру процессора в свойствах проекта при компиляции на x86 вместо AnyCPU , может в этом дело
karlik1337, смотрю, у вас в строке подключения все как тотне красиво смотрится.
попробуйте так записать ConnectionString:
Не знаю как, но проблема решилась установкой более ранней версии visual studio. Установил вместо 2019 версии 2015. Всем спасибо за ответы!
OwenGlendower, MySql.Data установил через MySql Installer, версия была 8.0.22 вроде. Думаю там была какая-то несовместимость с версией visual studio.
karlik1337, 8.0.22 это последняя версия на данный момент. Попробуйте через NuGet ту же версию поставить.
Подключение к облаку через подключение сетевого диска в проводнике - не работает
Всех приветствую, имеется Windows 7x64 Corporate, хочу подключиться к облакам яндекса и мэйла все.
MySQL не могу достать join хотя он работает в Mysql
добрый день есть запрос join из нескольких строк. Копирую его вставляю в phpMyadmin все нормально.
Подключение к MySQL
Помогите плиз написать работающий код для подключения к MySQL. Перепробовал все на что способен.
Подключение к БД mySQL
На моей странице HTML расположено много кнопок с параметрами, у каждой кнопки своя переменная, как.
Подключение к MySQL
Успешно подключился к MySQL через драйвер ODBC. Но теперь такая проблема: В мастере настройки.
Подключение к MySQL
Я подключался к MySQL с помощью MySQL Connector'a, но мне препод сказал, для универсальности.
Мне сказали, что лучший способ для этого - запустить эту команду:
Однако я получаю эту ошибку:
У меня установлен MySQL 8.0 с сервером, рабочей средой и т. д., Но, видимо, данных нет.
Значит, я его неправильно установил?
Mysql устанавливается в Windows как служба, а не как отдельный исполняемый файл. Запустите службу, затем подключитесь к ней через любого клиента.
@Shadow - Я заглянул в каталог служб в Windows, ничего там, я думаю, я тогда сделал неправильную пользовательскую установку?
Службы не устанавливаются в каталог служб в Windows.
@Shadow - Тогда есть другое место? : o
Вам действительно стоит прочитать руководство о том, как использовать mysql .
@Shadow - я знаю, как "использовать" mysql, как в рабочей среде, но проблема в том, что задача, которую мне нужно выполнить, требует, чтобы я использовал версию CMD, которую я не могу
Вы не пытались использовать cli. Что вы пытались сделать, так это запустить сам сервер mysql из командной строки. Это не одно и то же.
@Shadow - Я попытался установить его сейчас .. Повторите попытку 10: Попытка подключиться к Mysql @ localhost: 3306 с пользователем root без пароля . Ошибка MySQL 1042: Невозможно подключиться к любому из указанных хостов MySQL. Ошибка MySQL 1042: невозможно подключиться ни к одному из указанных хостов MySQL. Не удалось подключиться к MySQL Server 8.0.13 после 10 попыток. Завершенный этап настройки: запуск сервера
Продолжайте понимать, вы говорите о встроенной оболочке MySQL?
Будучи разработчиком веб-приложений, легко впасть в заблуждение, считая, что приложение без JavaScript не имеет права на жизнь. Нам становится удобно.
Если вы ищете пакет для быстрой интеграции календаря с выбором даты в ваше приложения, то библиотека Flatpickr отлично справится с этой задачей.
Клиент для URL-адресов, cURL, позволяет взаимодействовать с множеством различных серверов по множеству различных протоколов с синтаксисом URL.
У каждого из нас бывали случаи, когда нам нужно отцентрировать блочный элемент, но мы не знаем, как это сделать. Даже если мы реализуем какой-то.
Ubuntu16.04 установка записи процесса OpenCV
1. Установите зависимости и инструменты OpenCV. 2. Загрузите исходный код OpenCV и функции библиотеки и разархивируйте 3. Настройте среду Python. 4. Создайте виртуальную среду. 5. Включите виртуальную.
Windows не может запустить службу MySql (расположенную на локальном компьютере) Ошибка 2: системе не удается найти указанный файл
ошибка:
WindowsНе удалось запустить службу MySql (находится на локальном компьютере) Ошибка 2: системе не удается найти указанный файл
Путь к службе несовместим с установленным путем. Эта проблема может возникнуть после удаления и переустановки mysql до
Чтобы изменить реестр Windows, введите regedit в диалоговом окне «Выполнить» для Windows + R и нажмите «ОК», чтобы войти в редактор реестра. Выберите HKEY_LOCAL_MACHINE -> SYSTEM -> CurrentControlSet -> services -> MySQL, измените путь ImagePath на путь установки Mysql, например: D: \ mysql-5.7.19-winx64 \ bin \ mysqld MySQL
Способ 2:
(Это действительно сработало для меня)
Служба MySQL80 запускает исполняемый файл mysqld.exe , который фактически указывает на файл конфигурации, my.ini и переменную defaults-file , как видно из поля Path to executable на вкладке Properties службы.
Таким образом, использования одной только команды mysqld недостаточно, поскольку она не обеспечивает ни путь к файлу параметров по умолчанию, необходимому серверу во время запуска, который предоставляет служба MySQL80 (как описано ранее), ни правильное расположение папки data (которая также указывается. в my.ini от datadir ). Таким образом, правильная команда для запуска сервера выглядит следующим образом:
mysqld --defaults-file="C:\ProgramData\MySQL\MySQL Server 8.0\my.ini" --console
Кроме того, поскольку, когда mysqld используется отдельно, он пытается найти папку данных в C:\Program Files\MySQL\MySQL Server 8.0\data , которой на самом деле нет, вместо настройки defaults-file , datadir можно настроить так, чтобы он указывал на правильное расположение папки с данными, используя следующую команду:
mysqld --datadir="C:\ProgramData\MySQL\MySQL Server 8.0\Data" --console
(Подобный обходной путь упоминается Киртипрасат)
Еще один момент, который следует отметить, что в файле my.ini указано, что в "Инструкция по установке",
Таким образом, после копирования файла my.ini с C:\ProgramData\MySQL\MySQL Server 8.0 на C:\Program Files\MySQL\MySQL Server 8.0 , только mysqld --console работает нормально.
Примечание:
Команды в методе 2 работают, только если cmd предоставлены права администратора. Также, PATH необходимо установить для более легкого вызова программ MySQL.
When installing and running MySQL for the first time, you may encounter certain errors that prevent the MySQL server from starting. This section helps you diagnose and correct some of these errors.
Your first resource when troubleshooting server issues is the error log. The MySQL server uses the error log to record information relevant to the error that prevents the server from starting. The error log is located in the data directory specified in your my.ini file. The default data directory location is C:\Program Files\MySQL\MySQL Server 8.0\data , or C:\ProgramData\Mysql on Windows 7 and Windows Server 2008. The C:\ProgramData directory is hidden by default. You need to change your folder options to see the directory and contents. For more information on the error log and understanding the content, see Section 5.4.2, “The Error Log”.
For information regarding possible errors, also consult the console messages displayed when the MySQL service is starting. Use the SC START mysqld_service_name or NET START mysqld_service_name command from the command line after installing mysqld as a service to see any error messages regarding the starting of the MySQL server as a service. See Section 2.3.4.8, “Starting MySQL as a Windows Service”.
The following examples show other common error messages you might encounter when installing MySQL and starting the server for the first time:
If the MySQL server cannot find the mysql privileges database or other critical files, it displays these messages:
These messages often occur when the MySQL base or data directories are installed in different locations than the default locations ( C:\Program Files\MySQL\MySQL Server 8.0 and C:\Program Files\MySQL\MySQL Server 8.0\data , respectively).
This situation can occur when MySQL is upgraded and installed to a new location, but the configuration file is not updated to reflect the new location. In addition, old and new configuration files might conflict. Be sure to delete or rename any old configuration files when upgrading MySQL.
If you have installed MySQL to a directory other than C:\Program Files\MySQL\MySQL Server 8.0 , ensure that the MySQL server is aware of this through the use of a configuration ( my.ini ) file. Put the my.ini file in your Windows directory, typically C:\WINDOWS . To determine its exact location from the value of the WINDIR environment variable, issue the following command from the command prompt:
You can create or modify an option file with any text editor, such as Notepad. For example, if MySQL is installed in E:\mysql and the data directory is D:\MySQLdata , you can create the option file and set up a [mysqld] section to specify values for the basedir and datadir options:
Microsoft Windows path names are specified in option files using (forward) slashes rather than backslashes. If you do use backslashes, double them:
The rules for use of backslash in option file values are given in Section 4.2.2.2, “Using Option Files”.
If you change the datadir value in your MySQL configuration file, you must move the contents of the existing MySQL data directory before restarting the MySQL server.
If you reinstall or upgrade MySQL without first stopping and removing the existing MySQL service and install MySQL using the MySQL Installer, you might see this error:
This occurs when the Configuration Wizard tries to install the service and finds an existing service with the same name.
One solution to this problem is to choose a service name other than mysql when using the configuration wizard. This enables the new service to be installed correctly, but leaves the outdated service in place. Although this is harmless, it is best to remove old services that are no longer in use.
To permanently remove the old mysql service, execute the following command as a user with administrative privileges, on the command line:
Интеллектуальная рекомендация
Функция-член swap в контейнере
Функция-член swap в контейнере В векторе контейнера пространство, занимаемое его памятью, только увеличивается, например, сначала выделяется 10 000 байт, а затем стираются следующие 9 999. Хотя сущест.
Метод 1: запуск сервера с использованием установленной службы Windows
Либо запустите, остановите и перезапустите службу MySQL80 через приложение Services, либо используйте команды net в cmd, чтобы сделать то же самое. (Как указано в @nonNumericalFloat)
Читайте также: