Jvm dll ошибка pycharm
I'm using Jaydebeapi to connect to Hive but it throws the below error. I tried with both JDK 8 and 15.
OSError: [Errno 0] JVM DLL not found: /Library/Java/JavaVirtualMachines/zulu-15.jdk/Contents/Home/lib/libjli.dylib
I've added the JAVA_HOME in .zshrc file at the end:
The text was updated successfully, but these errors were encountered:
orakzai commented Aug 10, 2021
yes there is a lib directory. Btw I installed oracle JDK 8, and the library is able to run without problem. I guess the issue is with the zulu JDK
Thrameos commented Mar 21, 2022
The architecture of python and the jdk must match. So if python is x86 then the jdk must be as well.
Thrameos commented Aug 31, 2021
I think it has something to do with which applications on the system are signed and located in trusted paths. If Python and JPype were signed but Java was not then it would fail. The same is true in the reverse case. Unfortunately I don't know enough about the process to determine which is signed and which are not, nor do I have technical specs on how to make sure this is even the right solution. I am afraid we would need an apple expert to weigh in.
Here is the only example I found thus far.
Is there a libjvm.so file as well as the dylib file? Maybe we are trying to load the wrong file? If so manually give a path to startJVM with the so file and see if that fixes it.
The next most likely problem is that the LD_LIBRARY_PATH is missing something the shared library requires. I remember a case in which I had to add the $JAVA_HOME/bin to LD_LIBRARY_PATH because some shared library was in bin for unknown reason. There should be a utility that scans a shared library and tells if all the shared library dependencies can be satisfied.
Also from that doc it appears there is a function called dlerror() perhaps printing that value (you would need to recompile JPype) to see if it can tell us what is going on. I would just add
printf("%s\n", dlerror()); after JP_TRACE("errno", errno); to see if we can get some more information.
TudorEsan commented Mar 21, 2022
The architecture of python and the jdk must match. So if python is x86 then the jdk must be as well.
but I have that defined and I don't know why it wont work:
Any help accepted.
I had this issue when trying to start PHPStorm via the command line (add the phpstorm bin folder to your path, and you should be able to do eg phpstorm.exe . - adding the path to the jdk PHPStorm comes bundled with as JAVA_HOME ( setx JAVA_HOME "C:\Program Files (x86)\JetBrains\PhpStorm 2019.1\jre64" ) doesn't solve the issue
orakzai commented Aug 10, 2021
yes there is a lib directory. Btw I installed oracle JDK 8, and the library is able to run without problem. I guess the issue is with the zulu JDK
Thrameos commented Sep 7, 2021
Okay it sounds like the issue is identified. Python and the JVM must be the same architecture. I can try to improve the error message though it won't fix the underlaying issue.
vipzgy commented Aug 11, 2021 •
I had the same mistake. using mac m1 python3.9 JPype==1.3.0
Traceback (most recent call last):
File "/Users/xxx/miniforge3/lib/python3.9/site-packages/jpype/_core.py", line 226, in startJVM
_jpype.startup(jvmpath, tuple(args),
OSError: [Errno 0] JVM DLL not found: /Library/Java/JavaVirtualMachines/jdk1.8.0_301.jdk/Contents/Home/jre/lib/jli/libjli.dylib
but i have libjli.dylib in this path.
Thrameos commented Aug 30, 2021
What is the setting of JAVA_HOME and what is the contents of the JAVA_HOME directory?
Thrameos commented Aug 31, 2021
My best guess is that it is related to this ticket. Unfortunately I don't have access to such a system so I can't really test to see if this is a solution.
nils-tekampe commented Aug 31, 2021
@Thrameos I am not sure that this is the case here. In my Installation the Java is installed into the home directory. The “system Java” that resides in Library should not be involved at all. Or am I mistaken?
nils-tekampe commented Sep 6, 2021
I guess that the problem is that the JDK that is used here, is not native for M1. When the java excutable is called directly, I guess that the Rosetta framework kicks in but this does not seem to be the case here. I will try to find a JDK that has been compiled for M1 natively next.
15 Answers 15
It could be problem with 32 and 64 version. Maybe you trying to launch 32-bit shortcut on your Desktop. Try to launch 64 version (idea64.exe) inside IDEA folder. This worked for me.
This fixed my issue. If you're launching using the "start menu" search for "goland" in windows it tries to locate the x86 version of the JDK even if you have the x64 version installed.
I've got this error trying to open Maven project using command: idea pom.xml . But since I have no x86 JDK installed in my system this doesn't work. So one should use idea64 pom.xml with x64 JDK.
Change the following value from your Path system variable:
Also make sure there are no any other references to Java folders in the Path variable.
To fix I didn't need to touch my environment variables.
I fixed that issue by installing/re-installing the latest PHPStorm version choosing the option to keep old settings, logging out from Windows and logging back in.
I fixed this issue by:
- Setting the JAVA_HOME environment variable to the location of the JDK I wanted to use e.g. C:\Program Files\Java\jdk1.8.0_171
- Replacing any paths referring to Java e.g. C:\Program Files (x86)\java\jdk1.8.0_112\jre\bin\server\jvm.dll in Path with %JAVA_HOME%\bin as suggested by DimaSan
- Removing the following from the System variables path C:\ProgramData\Oracle\Java\javapath
The last step was crucial for me, this was overriding JAVA_HOME .
Actually i had installed the Android Studio canary version, and created a short cut of 32-bit on 64-bit windows operating system,
I had to run Android Studio as administrator on Windows10. Strange because I was able to run without doing this yesterday and upto an hour ago.
Nothing of the other solutions work for me on IntelliJ 2019.2 which starts to use JDK 11 on boot, so I have to resolve it on my own.
Open C:\Users\.IdeaIC2019.2\config\idea64.exe.jdk and edit it to be:
Note: the path on your machine may be different.
Plus, why should I switch back to use JDK 1.8 is because one of my addin/plugin to extend project templates relies on JDK 1.8 and breaks for JDK 11.
In my case, this error appeared after signing in to Microsoft account (I use Windows 10). When I logged out, the error dissapeared.
You have to do nothing buddy. Just use 32 bit version of application or install 64 bit JDK. You installed 32 bit JDK and you are trying to access 64 bit version of that application.
If you are installing Intellij Idea on a 32 bit System - the JDK will not come within the bundle.
To fix this issue follow the steps below :
1.Uninstall the installed Intellij IDEA
3.Install Intellij IDEA
I had the same problem - My solution was slightly different.
Hope this helps someone else!
I had this issue when trying to start PHPStorm via the command line (add the phpstorm bin folder to your path, and you should be able to do eg phpstorm.exe . ) - my local installed worked fine.
Add the path to the PhpStorm bin folder to the Path environment variable (for example, C:\Program Files\JetBrains\PhpStorm\bin ). After you configured the Path environment variable, you can run the PhpStorm commands.
adding the path to the jdk PHPStorm comes bundled with as JAVA_HOME ( setx JAVA_HOME "C:\Program Files (x86)\JetBrains\PhpStorm 2019.1\jre64" ) doesn't solve the issue as the default phpstorm.exe tries to find a 32-bit jdk
I needed to specifically use the 64-bit phpstorm application
phpstorm64.exe .
Всякий раз, когда я открываю IntelliJ IDEA, я получаю эту ошибку:
но у меня это определено, и я не знаю, почему это не сработает:
Любая помощь принимается.
У меня возникла эта проблема при попытке запустить PHPStorm через командную строку (добавьте папку bin phpstorm на свой путь, и вы сможете это сделать, например, phpstorm.exe . - добавление пути к jdk PHPStorm поставляется в комплекте с as JAVA_HOME ( setx JAVA_HOME "C:\Program Files (x86)\JetBrains\PhpStorm 2019.1\jre64" ) не решает проблема
Это может быть проблема с 32 и 64 версиями. Возможно, вы пытаетесь запустить 32-битный ярлык на рабочем столе. Попробуйте запустить 64 версию (idea64.exe) внутри папки IDEA. Это сработало для меня.
Это устранило мою проблему. Если вы запускаете с помощью «меню« Пуск », ищите« goland »в Windows, он пытается найти x86-версию JDK, даже если у вас установлена x64-версия.
Кажется, что в последних версиях, таких как 2019.2, сейчас можно загрузить только 64-разрядную версию.
Я получил эту ошибку при попытке открыть проект Maven с помощью команды: idea pom.xml . Но поскольку в моей системе не установлен x86 JDK, это не работает. Поэтому следует использовать idea64 pom.xml с x64 JDK.
Измените следующее значение Path системной переменной:
Также убедитесь, что в Path переменной нет других ссылок на папки Java .
Я исправил эту проблему, установив / переустановив последнюю версию PHPStorm, выбрав вариант сохранения старых настроек, выйдя из Windows и снова войдя в систему.
Я исправил эту проблему:
- Установка JAVA_HOME переменной окружения в место расположения JDK, которое я хотел использовать, например C:\Program Files\Java\jdk1.8.0_171
- Замена любых путей, относящихся к Java, например , C:\Program Files (x86)\java\jdk1.8.0_112\jre\bin\server\jvm.dll на предложенные DimaSan Path %JAVA_HOME%\bin
- Удаление вытекающее из системы переменного пути C:\ProgramData\Oracle\Java\javapath
Последний шаг был для меня решающим, это было решающим JAVA_HOME .
На самом деле я установил канареечную версию Android Studio и создал сокращенную 32-разрядную версию в 64-разрядной операционной системе Windows,
Мне пришлось запустить Android Studio от имени администратора в Windows 10. Странно, потому что вчера и почти час назад я мог бегать, не делая этого.
Никакие другие решения не работают для меня на IntelliJ 2019.2, который начинает использовать JDK 11 при загрузке, поэтому я должен решить это самостоятельно.
Откройте C: \ Users \ .IdeaIC2019.2 \ config \ idea64.exe.jdk и отредактируйте его так:
Примечание: путь на вашем компьютере может быть другим.
Кроме того, почему я должен вернуться к использованию JDK 1.8, потому что один из моих надстроек / подключаемых модулей для расширения шаблонов проектов полагается на JDK 1.8 и ломается для JDK 11.
В моем случае эта ошибка появилась после входа в учетную запись Microsoft (я использую Windows 10). Когда я вышел из системы, ошибка исчезла.
Ты ничего не должен делать, приятель. Просто используйте 32-битную версию приложения или установите 64-битный JDK. Вы установили 32-битный JDK и пытаетесь получить доступ к 64-битной версии этого приложения.
Если вы устанавливаете Intellij Idea в 32-битной системе, JDK не входит в комплект.
Чтобы решить эту проблему, выполните следующие действия:
1. Удалите установленную Intellij IDEA
3.Установите Intellij IDEA
У меня была такая же проблема - мое решение было немного другим.
Надеюсь, это поможет кому-то другому!
У меня возникла эта проблема при попытке запустить PHPStorm через командную строку (добавьте папку bin phpstorm на свой путь, и вы сможете это сделать, например phpstorm.exe . ) - моя локальная установка работала нормально.
Add the path to the PhpStorm bin folder to the Path environment variable (for example, C:\Program Files\JetBrains\PhpStorm\bin ). After you configured the Path environment variable, you can run the PhpStorm commands.
добавление пути к jdk PHPStorm в комплекте с as JAVA_HOME ( setx JAVA_HOME "C:\Program Files (x86)\JetBrains\PhpStorm 2019.1\jre64" ) не решает проблему, поскольку по умолчанию phpstorm.exe пытается найти 32-битный jdk
Мне нужно было специально использовать 64-битное приложение phpstorm
phpstorm64.exe .
А также JAVA_HOME , который должен быть установлен в каталог jdk , например. C:\Program Files\Java\jdk1.7.0_21 вы также должны добавить путь к каталогу bin jdk , например C:\Program Files\Java\jdk1.7.0_21\bin . Как вы уже знаете, как установить переменную JAVA_HOME , добавление дополнительного каталога к переменной пути - то же самое, но вам нужно отредактировать существующую переменную и добавить путь, разделенный точкой с запятой, например. добавьте ;C:\Program Files\Java\jdk1.7.0_21\bin в конец пути. Затем перезагрузите компьютер, чтобы запустить Android Studio. Дополнительные сведения см .: Получение Начат с Android Studio
Очень поздно для моего ответа, но все же для людей, которые ссылаются на это в будущем, у меня была та же проблема. Моя была x64-битной ОС, и я пытался открыть studio.exe, который является x32-битным. Я открыл studio64.exe, и он сработал.
Это работает так:
JAVA_HOME : C:\Program Files\Java\jdk1.7.0_21
ПУТЬ : C:\Program Files\Java\jdk1.7.0_21\bin
Я добился этого с помощью новой установки Android Studio в Windows 10. После установки он работал нормально, но выдавал эту ошибку после того, как я перезагрузил компьютер. Оказывается, мне нужно запустить Android Studio с правами администратора, чего по умолчанию не происходит.
Щелкните правой кнопкой мыши -> Запуск от имени администратора
Если это нецелесообразно, вероятно, существует другой подход, который предполагает установку JDK в месте, которое можно запускать без повышенных разрешений (идеи см. В других ответах).
Если вы используете 64-битную версию Windows, вам следует запустить 64-битный исполняемый файл studio64.exe.
Попробуйте запустить studio64.exe с правами администратора. (C: \ Program Files \ Android \ Android Studio \ bin)
Я добавил JAVA_HOME = C:\Program Files\Java\jdk-10.0.1 . И откройте Android Studio от имени администратора. Работал у меня.
Для меня это помогло убедиться, что я заканчивал переменные среды обратной косой чертой .
JAVA_HOME = C:\path to jdk\
PATH = C:\other existing paths\;C:\path to jdk\bin\
Это очень просто! [Step-1] [1] .. Просто перейдите в Дополнительные настройки> переменные среды. В Системные переменные добавьте новую переменную (JAVA_HOME), щелкнув по новой. Заполните значение переменной, указав расположение jdk- " C: \ Program Files \ Java \ jdk1.7.0_75 "в программной переменной.
На следующем шаге вам нужно отредактировать существующие системные переменные, прокрутив вниз, чтобы найти «путь: в значениях переменных уже определено так много значений пути. Поэтому, используя«; », вы можете добавить другое значение как«; C: \ Program Files \ Java \ jdk1.7.0_75 \ bin ".
Зацените готово. Всего наилучшего.
Чтобы быть уверенным, убедитесь, что ваша версия java включена в панели управления Java, иногда она конфликтует, и студия Android не может выбрать, поскольку тот, который включен, не находится в пути к классам. Убедитесь, что тот, который включен, является тем, который задается в классе переменные пути / среды .
Ошибки Jvm.dll вызваны ситуациями, которые приводят к удалению или повреждению файла JVM DLL .
В некоторых случаях ошибки jvm.dll могут указывать на проблему в реестре, проблему с вирусом или вредоносным ПО или даже сбой оборудования .
Thrameos commented Aug 30, 2021 •
It seems like the error message is deceiving in this case as the file is clearly present. The issue is how to figure out what the real error is.
My first thought would be making sure that the library actually exists and is a valid binary.
Next I would check to see if the file is tagged with the executable flag. If it is not then it likely would fail during the load.
From there is gets a bit harder as we would have to alter the code and recompile.
The error message was issued from the code in native/common/jp_exception.cpp
But this is just the error handler. The actual source of the error is native/common/jp_platform.cpp
The key part is the error number. We are currently getting as 0, which is not a valid value as far as I am aware. So the reason for the fail is dlopen returned NULL but did not set an errno. So to make headway we would need to find some way to print additional diagnostics as to why dlopen did not work. I know of no reason for a NULL without an errno.
nils-tekampe commented Sep 7, 2021
Making the error message more precise may help others. I guess that it would have saved me 3 hours of debugging.
nils-tekampe commented Aug 28, 2021
I also ran into this issue.
Brand new Mac Mini with BigSur and M1 CPU.
Python version:
Python 3.9.6 (default, Jun 28 2021, 19:24:41)
[Clang 12.0.5 (clang-1205.0.22.9)] on darwin
Type "help", "copyright", "credits" or "license" for more information
Java Version
openjdk version "1.8.0_292"
OpenJDK Runtime Environment (Zulu 8.54.0.21-CA-macosx) (build 1.8.0_292-b10)
OpenJDK 64-Bit Server VM (Zulu 8.54.0.21-CA-macosx) (build 25.292-b10, mixed mode)
capelastegui commented Sep 27, 2021
nils-tekampe commented Aug 30, 2021
Here is some more information.
- I set the JAVA_HOME explicitely as follows
export JAVA_HOME=/Users/nils/.sdkman/candidates/java/8.0.292-zulu - this folder contains
nils-tekampe commented Aug 31, 2021
An explicit chmod+x on the library did not change anything.
Is there anything else that I can do to support debugging this?
Ошибки Jvm.dll
Есть несколько различных способов, которыми ошибки jvm.dll могут появляться на вашем компьютере. Вот некоторые из наиболее распространенных способов, которыми вы можете увидеть ошибки jvm.dll:
Контекст ошибки jvm.dll является важной информацией, которая будет полезна при решении проблемы.
Не загружайте jvm.dll с веб-сайта загрузки DLL. Есть много причин, почему скачивание DLL-файла — плохая идея . Если вам требуется копия файла jvm.dll, лучше всего получить ее из оригинального, законного источника.
Запустите Windows в безопасном режиме, чтобы выполнить любой из следующих шагов, если вы не можете получить обычный доступ к Windows из-за ошибки jvm.dll.
Восстановите jvm.dll из Корзины . Самой простой причиной «отсутствующего» файла jvm.dll является то, что вы по ошибке удалили его. Если вы подозреваете, что вы случайно удалили jvm.dll, но уже очистили корзину, вы можете восстановить jvm.dll с помощью бесплатной программы восстановления файлов.
Восстановление удаленной копии jvm.dll с помощью программы восстановления файлов — разумная идея, только если вы уверены, что удалили файл самостоятельно и что он работал должным образом до того, как вы это сделали.
Загрузите и установите Java , который является исходным источником файла jvm.dll.
Используйте пакет автономной установки Windows, если загрузка по ссылке выше не исправила ошибку jvm.dll.
Запустите проверку на вирусы и вредоносные программы всей вашей системы. Некоторые ошибки jvm.dll могут быть связаны с вирусом или другим вредоносным ПО на вашем компьютере, которое повредило файл DLL. Возможно даже, что ошибка jvm.dll связана с враждебной программой, маскирующейся под файл.
Используйте Восстановление системы, чтобы отменить последние системные изменения. Если вы подозреваете, что ошибка jvm.dll была вызвана изменением важного файла или конфигурации, восстановление системы может решить эту проблему.
Файл jvm.dll может или не может быть связан с видеокартами — это был только пример. Ключевым моментом здесь является очень пристальное внимание к контексту ошибки и устранение неполадок соответственно.
Откатите драйвер до ранее установленной версии, если ошибки jvm.dll начались после обновления драйвера конкретного аппаратного устройства.
Установите все доступные обновления Windows . Многие пакеты обновления и другие исправления заменяют или обновляют некоторые из сотен распределенных файлов DLL Microsoft на вашем компьютере. Файл jvm.dll может быть включен в одно из этих обновлений.
Проверьте свою память, а затем проверьте свой жесткий диск . Устранение большинства проблем с аппаратным обеспечением выполняется в следующем шаге, но память и жесткий диск вашего компьютера легко тестируются и являются наиболее вероятными компонентами, которые могут вызвать ошибки jvm.dll в случае их сбоя.
Если на каком-либо из ваших тестов произошел сбой, замените память или замените жесткий диск как можно скорее.
Мы редко рекомендуем использовать очистители реестра. Опция включена здесь как «крайняя мера» попытка перед следующим разрушительным шагом.
Выполните чистую установку Windows . Чистая установка Windows сотрет все с жесткого диска и установит свежую копию Windows. Если ни один из вышеперечисленных шагов не исправляет ошибку jvm.dll, это должно быть вашим следующим действием.
Устраните неполадки, связанные с аппаратным обеспечением, если ошибки jvm.dll не устранены. После чистой установки Windows ваша проблема DLL может быть связана только с аппаратным обеспечением.
TudorEsan commented Mar 21, 2022
Hi, i tried to download all versions of the jdk (the arm ones), it does not seem to work. But i tried to download the x86 one and it magically did work. Maybe you should try both the arm and the x86 versions
Thrameos commented Aug 31, 2021
Reading some of the documentation on "notarized" shared libraries it seems very likely this is the issue. I can't find any technical documentation on how the model operates that would give me a way to catch and resolve this error from within JPype.
The apparent issue is that Python and JPype are installed at one protection level and Java was installed at another and thus calls to dlopen will fail. The solution is to have all at the same privilege level (likely by using a copy of Java outside of /Library). Why the error is silent preventing us from issuing a proper error is baffling. Without some error message that I can propagate to user there is no way this will not create endless headaches and support tickets. At best I could check if the file exists and is executable and if it still fails change the error message to something that indicates an unspecified permission error.
Читайте также: