Java io filenotfoundexception manifest mf не удается найти указанный файл
java.io.FileNotFoundException (Access is denied) – Causes and Fix tutorial shows what are the possible causes and fix for java.io.FileNotFoundException (Access is denied) exception.
5. Заключение
В этой краткой статье мы реализовали загрузку файлов в качестве ресурсов пути к классам, чтобы наш код работал последовательно независимо от того, как он был упакован.
In this article, we will discuss how to solve the FileNotFoundException in java. This exception mainly occurs for the below reasons:
1. If the application tries to open a file, but the file is not present in the desired location.
2. While creating the file, if there is a directory with the same name as the filename then this exception occurs.
3. The file is located in the desired location but
a. The application has no permission to write to the file since the file has read-only permission, or,
b. The permission of the file does not allow any application to read the file.
FileNotFoundException is a Checked Exception
FileNotFoundException extends IOException. This exception will be thrown by FileOutputStream, FileInputStream, and RandomAccessFile constructors when the specified pathname does not exist.
FileNotFoundException is a checked exception that must be handled by the application.
3) Trying to overwrite a read-only file
If you try to overwrite a read-only file either using stream or writer, you will get the “Access is denied” exception.
Fix:
Always check that if the file with the same name exists and it is not read-only before actually writing the file. If the file exists and it is read-only, make it writable as given in the below example.
4. Ресурсы
Давайте вместо этого используем загрузку ресурсов для загрузки ресурсов из пути к классу вместо определенного расположения файла. Это будет работать независимо от того, как упакован код:
ClassLoader.getResourceAsStream() просматривает путь к классу для данного ресурса. Начальная косая черта на входе в getResourceAsStream() указывает загрузчику на чтение из базы пути к классу. Содержимое нашего файла JAR находится в пути к классу , поэтому этот метод работает.
IDE обычно включает src/main/resources в свой путь к классу и, таким образом, находит файлы.
4) Trying to create a file in the root folder of the system drive in Windows
Fix:
In some versions of Windows, the system does not allow some users to write to the root of the system drive if they do not have the required privileges. Try to create a file in a subfolder, for example, C:/somedir/somefile.txt instead of the root “C:/somefile.txt”.
1. Обзор
В этом руководстве мы рассмотрим проблему, которая может возникнуть при чтении файлов ресурсов в Java-приложении: во время выполнения папка ресурсов редко находится в том же месте на диске, что и в нашем исходном коде.
Давайте посмотрим, как Java позволяет нам получать доступ к файлам ресурсов после того, как наш код был упакован.
How to fix java.io.FileNotFoundException (Access is denied) exception?
There are several possible causes due to which you may encounter java.io.FileNotFoundException (Access is denied) exception as given below.
[Fixed] FileNotFoundException in Java with Examples
Output:
java.io.FileNotFoundException: C:/Users/javahungry/abc.txt (No such file or directory)
at java.base/java.io.FileInputStream.open0(Native Method)
at java.base/java.io.FileInputStream.open(FileInputStream.java:219)
at java.base/java.io.FileInputStream. (FileInputStream.java:157)
at JavaHungry.main(JavaHungry.java:10)
Solution:
If the exception indicates the file is in an invalid path, then we have to provide a valid path. You have to make sure that path actually points to a file or directory that exists in your system.
2. If the file does not exist then the application will create it. However, if the file can not be created and there is a directory with the same name as the filename then the FileNotFoundException is thrown as shown below:
Output:
java.io.FileNotFoundException: C:/Users/javahungry/abc.txt (Is a directory)
at java.io.FileOutputStream.open0(Native Method)
at java.io.FileOutputStream.open(FileOutputStream.java:270)
at java.io.FileOutputStream. (FileOutputStream.java:213)
at JavaHungry.main(JavaHungry.java:10)
Solution:
If the exception indicates provided filename is a directory, then we have to provide a valid filename that does not conflict with the directory name.
Another solution is to delete the directory if it is not being used by the application.
3. Now we provide a filename as input that exists in our system but has no permission to read/write from our application. The following exception is thrown:
Output:
java.io.FileNotFoundException: C:/Users/javahungry/abc.txt (Permission denied)
at java.io.FileOutputStream.open0(Native Method)
at java.io.FileOutputStream.open(FileOutputStream.java:270)
at java.io.FileOutputStream. (FileOutputStream.java:213)
at JavaHungry.main(JavaHungry.java:10)
Solution:
If the exception indicates the file does not have permission, then we have to provide the read/write permission to the file.
That's all for today. Please mention in the comments in case you have any questions regarding how to solve FileNotFoundException in Java with examples.
About The Author
Subham Mittal has worked in Oracle for 3 years.
Enjoyed this post? Never miss out on future posts by subscribing JavaHungry
2) You do not have permission to read the file
If you try to open and read a file for which you do not have the read permission, you will get this exception.
Fix:
Make sure you have permission to read the file before opening and reading it.
2. Чтение Файлов
Допустим, наше приложение читает файл во время запуска:
Если мы запустим приведенный выше код в среде IDE, файл загрузится без ошибки. Это связано с тем, что наша ИДЕЯ использует каталог нашего проекта в качестве текущего рабочего каталога , а каталог src/main/resources находится прямо там, чтобы приложение могло читать.
Теперь предположим, что мы используем плагин Maven JAR для упаковки нашего кода в виде JAR.
Когда мы запускаем его в командной строке:
Мы увидим следующую ошибку:
8 Answers 8
Put the word.txt directly as a child of the project root folder and a peer of src
Disclaimer: I'd like to explain why this works for this particular case and why it may not work for others.
Why it works:
When you use File or any of the other FileXxx variants, you are looking for a file on the file system relative to the "working directory". The working directory, can be described as this:
When you run from the command line
C:\EclipseWorkspace\ProjectRoot\bin > java com.mypackage.Hangman1
the working directory is C:\EclipseWorkspace\ProjectRoot\bin . With your IDE (at least all the ones I've worked with), the working directory is the ProjectRoot . So when the file is in the ProjectRoot , then using just the file name as the relative path is valid, because it is at the root of the working directory.
Similarly, if this was your project structure ProjectRoot\src\word.txt , then the path "src/word.txt" would be valid.
Why it May not Work
For one, the working directory could always change. For instance, running the code from the command line like in the example above, the working directory is the bin . So in this case it will fail, as there is not bin\word.txt
Secondly, if you were to export this project into a jar, and the file was configured to be included in the jar, it would also fail, as the path will no longer be valid either.
That being said, you need to determine if the file is to be an embedded-resource (or just "resource" - terms which sometimes I'll use interchangeably). If so, then you will want to build the file into the classpath, and access it via an URL. First thing you would need to do (in this particular) case is make sure that the file get built into the classpath. With the file in the project root, you must configure the build to include the file. But if you put the file in the src or in some directory below, then the default build should put it into the class path.
You can access classpath resource in a number of ways. You can make use of the Class class, which has getResourceXxx method, from which you use to obtain classpath resources.
For example, if you changed your project structure to ProjectRoot\src\resources\word.txt , you could use this:
getResourceAsStream returns an InputStream , but obtains an URL under the hood. Alternatively, you could get an URL if that's what you need. getResource() will return an URL
For Maven users, where the directory structure is like src/main/resources , the contents of the resources folder is put at the root of the classpath. So if you have a file in there, then you would only use getResourceAsStream("/thefile.txt")
поэтому я застрял на этом некоторое время. В принципе, у меня есть файл, созданный под названием "Слово.txt " и всякий раз, когда я запускаю программу, она дает мне эту ошибку:
по иронии судьбы, я создал файл " word.txt" в том же каталоге, что и мой java-файл, и все же он все еще дает мне эту ошибку.
вставить слово.txt непосредственно в качестве дочернего элемента корневой папки проекта и однорангового узла src
отказ от ответственности: я хотел бы объяснить, почему это работает в данном конкретном случае и почему это может не работать для других.
почему это работает:
при использовании File или любой другой FileXxx варианты, вы ищете файл в файловой системе относительно "рабочий каталог". Работа каталог, можно описать следующим образом:
при запуске из командной строки
C:\EclipseWorkspace\ProjectRoot\bin > java com.mypackage.Hangman1
рабочий каталог-это C:\EclipseWorkspace\ProjectRoot\bin . С вашей IDE (по крайней мере все те, с которыми я работал), рабочий каталог-это ProjectRoot . Поэтому, когда файл находится в ProjectRoot , а затем использовать только имя файла в качестве относительного пути допустимо, потому что он находится в корне рабочего каталога.
аналогично, если это был ваш проект структура ProjectRoot\src\word.txt , тогда путь "src/word.txt" будет действительным.
почему это может не сработать
во-первых, рабочий каталог всегда может измениться. Например, при запуске кода из командной строки, как в приведенном выше примере, рабочим каталогом является bin . Так что в этом случае он потерпит неудачу, так как нет bin\word.txt
во-вторых, если вы должны были экспортировать этот проект в jar, и файл был настроен для включения в jar, он также потерпит неудачу, так как путь больше не будет действительным.
это, как говорится, вам нужно определить, должен ли файл быть встроенный-ресурс (или просто "ресурс" - термины, которые иногда я буду использовать как синонимы). Если это так, то вы захотите создать файл в пути к классам и получить к нему доступ через URL-адрес. Первое, что вам нужно будет сделать (в данном конкретном случае), это убедиться, что файл get построен в classpath. С файлом в корень проекта, вы должны настроить сборку для включения файла. но если вы поместите файл в src или в некотором каталоге ниже, тогда сборка по умолчанию должна поместить ее в путь к классу.
вы можете получить доступ к ресурсу classpath несколькими способами. Вы можете использовать Class класс, который имеет getResourceXxx метод, из которого вы используете для получения ресурсов classpath.
например, если вы изменили структуру своего проекта ProjectRoot\src\resources\word.txt , вы можете использовать это:
getResourceAsStream возвращает InputStream , но получает URL-адрес под капотом. Кроме того, вы можете получить URL если это то, что вам нужно. getResource() вернет URL
для пользователей Maven, где структура каталогов похожа на src/main/resources содержимое resources папка помещается в корень пути к классам. Поэтому, если у вас есть файл, вы будете использовать только getResourceAsStream("/thefile.txt")
можно использовать относительные пути, но они могут быть сложными. Лучшее решение-знать, где сохраняются ваши файлы, то есть распечатать папку:
этот код должен печатать папку, в которой он ищет. Поместите файл туда, и вы будете хорошо идти.
ваш файл должен находиться непосредственно под папкой проекта, а не внутри любой другой подпапки.
если папка вашего проекта называется, например, AProject , он должен быть в том же месте, что и ваш .
Я думаю, это всегда сводится к classpath . сказав это, если вы запустите из той же папки, где ваш .класс тогда change Scanner input = new Scanner(new File("word.txt")); to Scanner input = new Scanner(new File("./word.txt")); это должно работать
убедитесь, что при создании txt-файла вы не вводите имя "name.txt", просто введите "имя". Если ввести " name.txt "Eclipse увидит это как" имя.формат txt.формат txt." Это решило все за меня. Также сохраните файл в папке src, а не в папке .java находится, одна папка вверх.
Я читал путь из файла свойств и не упоминал, что в конце было место. Убедитесь, что у вас его нет.
У меня такая же проблема, но знаешь почему? потому что я не ставил .txt в конце моего файла, и поэтому это был файл не текстовый файл, вы должны сделать только две вещи:
Программы Java не могут легко загружать файлы после того, как они были скомпилированы в ресурсы файла JAR или WAR. Вот как надежно загружать ресурсы.
5) File is being used by another process
If the file is already opened exclusively by some other process, opening it for either reading or writing will cause java.io.FileNotFoundException (Access is denied) exception.
But when I try to access it in the following code this file not found error occurs:
Either use a full path as already said, or create an output file in your program to see where it is stored, then move your input file to that location
When you run the program, the "word.txt" file needs to be in the same directory as the .class file generated by the compiler, not the .java file. In an IDE like Netbeans, put the file in the project folder, not the source folder
3. Исходный код и скомпилированный код
Когда мы создаем JAR, ресурсы помещаются в корневой каталог упакованных артефактов.
В нашем примере мы видим, что настройка исходного кода имеет input.txt в src/main/resources в нашем каталоге исходного кода.
Однако в соответствующей структуре БАНКИ мы видим:
Здесь, input.txt находится в корневом каталоге JAR. Поэтому, когда код будет выполнен, мы увидим исключение FileNotFoundException .
Даже если мы изменим путь на /input.txt исходный код не смог загрузить этот файл, так как ресурсы обычно не адресуются в виде файлов на диске. Файлы ресурсов упакованы в банку, и поэтому нам нужен другой способ доступа к ним.
1) Trying to open and read a directory
You cannot open and read a directory like normal files. Trying to do that will result in the exception. Please see the below-given code example where I try to open a directory and try to read it.
Fix:
Make sure that you are not trying to open a directory for reading or writing.
Читайте также: