Init vga data fail please restart gpu tweak что это значит
Hello,
I've installed GPU Tweak II ver1057.
Every time I try to launch it I get this error in a window pop up: "Init VGA Data Fail. Please Restart GPU Tweak".
I have tried the following:
Installed early versions (GPU Tweak I). Every time I try to launch these older versions, nothing happens. I see the GPUTweak.exe service start under windows services, but it disappears after 3-5 seconds.
Update nvidia drivers.
Installed on different hard drives and different folders from the default.
Tried in SLI and single card mode.
Turned off AI Suite 3
Ran application on different windows users.
Turned CPU OC off.
Are there any logs the application keeps for troubleshooting?
Any ideas?
Thanks
Windows 7 Ultimate 64bit
i7-5820k - OC'd
Strix GTX980 OC (SLI)
AI Suite 3 is installed
GeForce driver ver 353.62
I have same problem. My board is H97-Pro Gamer and card is strix r9380. Does anyone get a solution to fix it? Thx.
I had this error a few days ago when explorer.exe crashed. rebooting fixed mine. im sure you tried that already
If you open the GpuT2 file location [. Program Files (x86)/Asus/GPU TweakII ], look for "InitData_Card1.ini". Open/Edit it with your favorite text editor. The very first section Titled "[VGACardInfo]" contains your card, if this is different than what you actually have, then ya you will have issues.
In the same folder is 3 other files with similar name ending Card1.ini to Card4.ini, i am thinking that if you installed your card in a different slot you might have one of these other files as the active settings file, I dont know for sure. (I find GpuT2 clumsily programmed to begin with, so it wouldnt surprise me to see this. )
I dont recommend this but, I renamed the unused InitCard2 - 4.ini files. I did this while I was looking for useless files. I dont know why ASUS includes ATIWinflash and files, ASUS doesnt even use Liveupdate, AFAIK its only in there as a marketing feature. Personally, I would never use auto-update for anything besides Windows Update.
Here is an example of mine:
[VGACardInfo]
DeviceID=0x679A
SSID=0x47E
ModelName=R9280-DC2 TOP
NV_BIOSString=NULL
AMD_OEMString=113-AD65700-100
BIOSDate=02/18/14 04:29
You can confirm some of these with a program like Speccy or other source you can get detailed System Information.
Hello,
I've installed GPU Tweak II ver1057.
Every time I try to launch it I get this error in a window pop up: "Init VGA Data Fail. Please Restart GPU Tweak".
I have tried the following:
Installed early versions (GPU Tweak I). Every time I try to launch these older versions, nothing happens. I see the GPUTweak.exe service start under windows services, but it disappears after 3-5 seconds.
Update nvidia drivers.
Installed on different hard drives and different folders from the default.
Tried in SLI and single card mode.
Turned off AI Suite 3
Ran application on different windows users.
Turned CPU OC off.
Are there any logs the application keeps for troubleshooting?
Any ideas?
Thanks
Windows 7 Ultimate 64bit
i7-5820k - OC'd
Strix GTX980 OC (SLI)
AI Suite 3 is installed
GeForce driver ver 353.62
I have same problem. My board is H97-Pro Gamer and card is strix r9380. Does anyone get a solution to fix it? Thx.
I had this error a few days ago when explorer.exe crashed. rebooting fixed mine. im sure you tried that already
If you open the GpuT2 file location [. Program Files (x86)/Asus/GPU TweakII ], look for "InitData_Card1.ini". Open/Edit it with your favorite text editor. The very first section Titled "[VGACardInfo]" contains your card, if this is different than what you actually have, then ya you will have issues.
In the same folder is 3 other files with similar name ending Card1.ini to Card4.ini, i am thinking that if you installed your card in a different slot you might have one of these other files as the active settings file, I dont know for sure. (I find GpuT2 clumsily programmed to begin with, so it wouldnt surprise me to see this. )
I dont recommend this but, I renamed the unused InitCard2 - 4.ini files. I did this while I was looking for useless files. I dont know why ASUS includes ATIWinflash and files, ASUS doesnt even use Liveupdate, AFAIK its only in there as a marketing feature. Personally, I would never use auto-update for anything besides Windows Update.
Here is an example of mine:
[VGACardInfo]
DeviceID=0x679A
SSID=0x47E
ModelName=R9280-DC2 TOP
NV_BIOSString=NULL
AMD_OEMString=113-AD65700-100
BIOSDate=02/18/14 04:29
You can confirm some of these with a program like Speccy or other source you can get detailed System Information.
Hello,
I've installed GPU Tweak II ver1057.
Every time I try to launch it I get this error in a window pop up: "Init VGA Data Fail. Please Restart GPU Tweak".
I have tried the following:
Installed early versions (GPU Tweak I). Every time I try to launch these older versions, nothing happens. I see the GPUTweak.exe service start under windows services, but it disappears after 3-5 seconds.
Update nvidia drivers.
Installed on different hard drives and different folders from the default.
Tried in SLI and single card mode.
Turned off AI Suite 3
Ran application on different windows users.
Turned CPU OC off.
Are there any logs the application keeps for troubleshooting?
Any ideas?
Thanks
Windows 7 Ultimate 64bit
i7-5820k - OC'd
Strix GTX980 OC (SLI)
AI Suite 3 is installed
GeForce driver ver 353.62
I have same problem. My board is H97-Pro Gamer and card is strix r9380. Does anyone get a solution to fix it? Thx.
I had this error a few days ago when explorer.exe crashed. rebooting fixed mine. im sure you tried that already
If you open the GpuT2 file location [. Program Files (x86)/Asus/GPU TweakII ], look for "InitData_Card1.ini". Open/Edit it with your favorite text editor. The very first section Titled "[VGACardInfo]" contains your card, if this is different than what you actually have, then ya you will have issues.
In the same folder is 3 other files with similar name ending Card1.ini to Card4.ini, i am thinking that if you installed your card in a different slot you might have one of these other files as the active settings file, I dont know for sure. (I find GpuT2 clumsily programmed to begin with, so it wouldnt surprise me to see this. )
I dont recommend this but, I renamed the unused InitCard2 - 4.ini files. I did this while I was looking for useless files. I dont know why ASUS includes ATIWinflash and files, ASUS doesnt even use Liveupdate, AFAIK its only in there as a marketing feature. Personally, I would never use auto-update for anything besides Windows Update.
Here is an example of mine:
[VGACardInfo]
DeviceID=0x679A
SSID=0x47E
ModelName=R9280-DC2 TOP
NV_BIOSString=NULL
AMD_OEMString=113-AD65700-100
BIOSDate=02/18/14 04:29
You can confirm some of these with a program like Speccy or other source you can get detailed System Information.
Ребята, сегодня мы поговорим про нечто необычное. Программа ASUS GPU Tweak это не какая-то там вам ненужная прога, это что-то важное и крутое, в этой проге полно выкрутасов. ASUS GPU Tweak предназначена для видеокарт, при помощи этой проги вы можете получить какие-то дополнительные настройки видеокарты, чтобы выжать с нее максимальную производительность. Самое интересное, что изменять параметры видеокарты можно даже во время игре, во дела!
Кстати есть еще вторая версия проги, она так и называется ASUS GPU Tweak II. Значит в существовании такой проги нет ничего удивительного, я прекрасно помню когда мне купили комп, это было тучу лет назад, но даже тогда уже в комплекте с компом, а если быть точнее то с материнкой, шел диск с драйверами и какими-то прогами.. Еще помню одно и наверно запомню на всю жизнь, это дизайн, он был просто странным: проги были цветными и как будто игрушечными. Так вот для материнки шла прога с похожим функционалом, она позволяла разгонять процессор, поднимать там вроде частоту FSB или чего, я толком не помню… Короче подобные проги есть и для материнок и для видеокарт, это все так называемый фирменный софт
Вы только посмотрите как выглядит данная программа:
Как видите здесь идут какие-то виртуальные измерительные приборы типа. Как я понимаю, то здесь показано использование видеопамяти, скорость видеопроцессора и температура видеочипа. Вообще видеочип в компе именуется как GPU, ну это просто вам на заметку.
Также я накопал инфу о том, что в проге реализованы четыре режима:
- Режим разгона. Этот режим именуется как OC Mode и он вообще ништяковский, ведь он разблокировывает производительность. Не совсем понятно что тут имеется ввиду, может быть это режим в котором возможно поднимать частоту чего-то там чтобы увеличить мощность видюхи? Не совсем понятно. Скажу только знаете что? Вы это, не забывайте смотреть на температуру! Видюхи не любят жариться.. Ну вы поняли
- Второй режим Gaming Mode. Данный режим вроде как установлен по умолчанию и при нем получается лучше всего играть в игры, при этом чтобы игруха норм работала и комп не слишком пыхтел.
- Silent Mode. Я бы этот режим назвал щадящим, ведь он предназначен для спокойной и тихой работы видеокарты. В таком режиме видюха сидит себе на расслабончике, отдыхает.
- My Profile. Ну а этот режим предназначен для настоящих кулхацкеров: здесь вы можете сохранить свой профиль настроек, тонко настроив видюху! Но чтобы эту настройку провести, то нужны кое какие знания в оверклокинге (разгон).
Также при помощи программы ASUS GPU Tweak вы можете записывать видео игрового процесса.
По поводу режима My Profile. Значит все верно, режим для кулхацкеров, ибо тут можно настроить такое как напряжение, настроить VRM, эта тема для опытных юзеров, а вот окно настройки:
Ну и дела. О чем это я? Да вот о том, что вместе с этой прогой у вас также может быть и еще одна не менее крутая прога, это Gaming Booster:
Она поможет в компе навести мини-марафет. Короче уберет лишние процессы и распределит ресурсы компа. Ну прога-хозяйка, что еще сказать А хотите знать что делает прога Gaming Booster? А вот чем она занимается:
-
Отключает визуальные эффекты. Все верно, согласен, я сам себе отключаю все эти плавные эффекты и комп работает немного быстрее. Этот трюк я знаю еще со времен Windows XP. Кстати картинка в тему:
С одной стороны кажется, фух, ну дела, проги крутые спору нет. А вот с другой стороны удивляться нечему. Современные мощные видеокарты стоят или дороговато или ну очень дорого. Видеокарта сегодня это не просто устройство, это сердце игрового компьютера… С процессором проще, берете топовую модель и современный сокет и делов. А вот видеокарта, тут куда больше нюансов…
Это мы с вами поговорили о ASUS GPU Tweak версия II, тогда получается что вот как выглядела первая версия этой проги:
То есть тут выше на картинке также показаны вроде настройки разгона.. Ну а это тюнинг памяти, так бы сказать тонкая настройка:
Тут нужно настраивать осторожно, если вы не знаете что такое тайминги, напряжение памяти, то лучше тут ничего не трогать!
Удаление недавно установленных устройств
Откройте раздел Программы и компоненты командой appwiz.cpl из окна Win + R.
Щелкните правой кнопкой мыши на приложении, которое установили перед сбоем vender.dll, и удалите его.
После перезагрузки системы, проблема должна исчезнуть. На форумах часто велись дискуссии о программах Samsung Magician для управления SSD-накопителями и UPSilon 200 для управления ИБП, которые вызывали эту ошибку.
Обновление драйвера видеокарты
Двойным щелчком мыши по дискретной видеокарте разверните Свойства и на вкладке «Драйвер» нажмите на кнопку «Обновить».
Запустите автоматическое обновление и дождитесь результатов.
Если этим способом не удалось обновить устройство, вернитесь на вкладку Видеоадаптеры, но теперь в меню выберите «Удалить». Когда удаление будет завершено, перезагрузите ПК. В ходе последующего запуска, когда Windows обнаружит оборудование без драйверов, инициализирует их установку в автоматическом режиме.
Установка графического драйвера вручную
Сделайте запрос в интернете «Расширенный поиск nVidia» и перейдите на страницу, как показано на рисунке.
Укажите данные о модели, включая тип, серию и семейство продукта, а также «операционную систему». Затем нажмите на кнопку «Поиск».
При отображении результатов, загрузите последнюю версию ПО.
Затем перейдите в папку Загрузки и запустите только что загруженный файл. В ходе установки отметьте флажком поле «Выполнить чистую установку».
Читайте также: