Connect this device using a usb cabel of registr in again ps4 ошибка
- Удостоверьтесь, что расстояние между консолью и контроллером не слишком большое, в пределах одной комнаты, а между обоими устройствами нет никаких препятствий.
- Если проблемный контроллер раньше подключался к компьютеру, его необходимо сбросить. Для этого воспользуйтесь кнопкой перезагрузки: возьмите тонкий длинный предмет (подойдет инструмент для извлечения сим-карты или разогнутая канцелярская скрепка), переверните геймпад днищем вверх и обратите внимание на зону, отмеченную на изображении далее.
Нужно выбрать вариант «Bluetooth-устройства» («Bluetooth Devices»).
Выделите запись проблемного геймпада и нажмите «Крест».
Воспользуйтесь кнопкой «Options» для вызова меню.
В нём будет единственная опция «Забыть устройство» («Forget Device»), воспользуйтесь ею.
Подтвердите операцию нажатием на «OK».
Дмитрий, о боже! Я и не думал, что их так много, однозначно спасибо, пусть и на английском.
Ниже ссылка на часть "популярных ошибок" с описанием на русском языке.
Металлический охотник за трофеями
Карма: 6869 ( 10) 13197
Гарнитура:
cLab1u
Заблокирован
3552081
Гарнитура:
gear_ru
Solution 5: Rebuild Database on PS4
Rebuilding the database can fix the LAN cable issue in some cases. It can take 10 minutes to 1 hour, depending upon how much data you have in the drive. Follow the steps to rebuild the database on your PS4.
- When the PS4 is off, hold the power button for 10 seconds and wait for the second beep, and the console will boot up in safe mode.
- Connect your PS4 controller with a Micro USB cable. (You can use the USB charging cable.)
- Press the PlayStation button on your controller.
- Use the D-Pad to go down and select ”Rebuild Database” using the X button.
- Now you will see a loading screen, wait until it completes, and you will see the home screen.
Now sign-in to your account and connect the PS4 with a LAN cable. If you find any of your purchased games missing from the library, you can restore them by following the steps below:
Make sure you are signed into the PlayStation network when you do this.
- Go to settings > Account Management > Restore Licenses and hit the Restore button.
If none of the solutions fixed the LAN cable issue for you, don’t lose hope. Below we have mentioned some more solutions that you can use; let us know in the comments box if they work for you or not.
- If you are using CAT 6 or 7 LAN cable, using a CAT 5 cable may fix the issue.
- Try a different port on the router.
- Try a different router; if you don’t have one, you can try a different NAT Router configuration.
- If there is dust collected in the ethernet port, clean it.
- Make sure the Ethernet plug is not being bent by anything.
- Try changing the maximum transmission unit (MTU) settings on your PS4.
- Buy an Ethernet USB dongle, plug it into a USB port on your PS4 device, and then connect the LAN cable.
- Try connecting another device to which your PS4 is currently connected; if it works, the network interface connection on the PS4 is faulty and if it does not work on other devices, too, call your Internet service provider (ISP).
If you are still unable to use LAN cable, you can try reinstalling the system software. It will erase all the data stored in your hard drive , so we recommend doing it when nothing works. To reinstall the PS4 system software, you need a computer with an internet connection and a USB drive for downloading the update file from PS4’s website. Watch the video below and follow the steps to reinstall the software.
Best Ethernet Cable for PS4
The DanYee Cat 7 is one of the best ethernet cables for PlayStation 4. It is available in multiple lengths, and it’s braided too, so it should last years.
Коды ошибок PlayStation 4
Начинающий охотник за трофеями
Карма: 458 ( 3) Popere4nick
Solution 1: Reboot the Router
This is one of the easiest and very effective solutions. Unplug the power cable of the router and plug it in again after 10 seconds. Wait for your router to reboot and follow the steps mentioned below.
Settings > Network > Set Up Internet Connection and select Use a LAN Cable, and then you can click on “Easy,” and you will see the “Internet Settings Updated” message.
Note: If this does not work for you, try restarting the router and PS4 both.
PS4 LAN cable keeps disconnecting
If your LAN cable is working but keeps disconnecting, you can try changing the cable or connect the cable to a different port of the router. A loose PS4 ethernet port can also cause this issue, so you may have to get it replaced by a Sony repair center.
Подключение по USB
В случае неполадок с проводным соединением действия будут следующими:
- Первым делом проверьте работоспособность кабеля – он имеет разъём Type-C, поэтому подходит практически к каждому устройству с аналогичными портами. Если на втором девайсе наблюдаются проблемы с соединением, неполадка точно связана с кабелем, и он требует замены.
- Если выяснилось, что шнур исправен, попробуйте с его помощью подключить геймпад к другому разъёму на корпусе консоли – не исключено, что мог выйти из строя основной используемый порт.
- Также проверьте состояние всех коннекторов на кабеле, геймпаде и ПС4 – контакту может мешать загрязнение или окисление. Если таковое будет обнаружено, обесточьте приставку или выключите контроллер, затем осторожно протрите контакты ватной палочкой, смоченной в спирте.
- При необходимости произведите сброс или отмену сопряжения устройства, описанные в инструкции для беспроводных подключений.
Коды ошибок PlayStation 4
Начинающий охотник за трофеями
Карма: 458 ( 3) Popere4nick
Solution 2: Insert the Lan Cable Into the Port “Halfway” Through
This method works for people who have damaged the PS4 LAN port. All you have to do is, insert the LAN cable into the port “halfway” through, stop before the “click” and the PS4 might detect the cable.
Solution 4: Set up a Static IP Address for PS4
Please try solution 3 first, and if it does not fix the LAN cable issue, set up a static IP. Like dynamic IPs, static IPs do not change when you restart your router, they are permanent. You have to change your PS4 local IP (this method will not change your public IP address.)
Steps
- Go to Settings > Network > View Connection Status.
- Write down the IP address, Subnet Mask, Default Gateway, and go back.
- Go to Set Up Internet Connection > Use a LAN Cable.
- Choose Custom and select Manual on the next screen.
Now you have to enter your IP address; keep in mind that you don’t have to enter the exact IP, enter the first three numbers of your IP address and choose any number from 2 to 255 as your last number. Once you enter the IP, enter the Subnet Mask, and Default gateway that you copied earlier.
Choose the following options:
- MTU: automatic.
- Proxy Server: Do Not Use.
Test your internet connection, and it should say successful. Now connect the LAN cable, and hopefully, the PS4 will detect it.
How to connect PS4 with a LAN cable
- Connect one end of an Ethernet cable to a port on your router and connect the other end to your PS4 console.
- Power on the router and PS4 console.
- On the PS4 home screen, select Settings.
- Select Network > Set Up Internet Connection > Use LAN Cable > Easy.
Разрядка батареи Dualshock 4
Возможно, источником сбоя является банальный разряд аккумулятора – об этом говорит также отсутствие какой-либо реакции на нажатия кнопок. Попробуйте зарядить ваш геймпад одним из методов далее и проверить наличие дефекта.
Мы рады, что смогли помочь Вам в решении проблемы.
Отблагодарите автора, поделитесь статьей в социальных сетях.
Опишите, что у вас не получилось. Наши специалисты постараются ответить максимально быстро.
2
SOLVED: I tried using my partner’s phone cable to connect, and it worked. Seems like the included USB cable was power-only, not data.
I recently bought a PS4 from a relative, who performed a factory reset before giving it to me. (He purchased the system new.) It came with two controllers and a USB cable. When I start up the console, it just brings me to a screen reading “Connect the DUALSHOCK 4 wireless controller using the USB cable, and then press the PS button.”
When I do so, I get a pop-up prompt reading “Connect this device using a USB cable, or register it again.” If I press the PS button after that, I get no further response. I can’t get either controller to work, and I can’t get the system to advance past this screen.
I’ve tried five different cables, and all were unsuccessful. I charged the controllers using the included cable with no problem. I’ve tried switching the cable from one USB port to another.
I’ve tried several times to perform a hard reset on the controllers. No matter what I do, the outcome is always the same: I connect my controller via USB, the system gives me an error message telling me I need to connect via USB, and then I can’t make the system respond to any other input.
What’s going on here? How do I fix it?
Edit: The labels on the underside of the controllers are worn down, but they seem to read “Model CUH-ZCT1U”. The console model is CUH-1001A.
Edit 2: I just talked with him today. He had been using an external hard drive on the unit up to the time he got a PS5, so it doesn’t seem like it has a bad USB bus.
The controller light turns orange when plugged in, indicating it’s charging.
Заблокирован
3552081
Гарнитура:
gear_ru
Solution 3: Change DNS Settings on PS4
DNS stands for ‘Domain Name System,’ replacing it with Cloudflare’s or Google’s DNS may fix the issue and can also improve the internet speed. Follow the steps to change your DNS.
- Navigate to Settings > Network > Setup internet connection.
- Choose LAN Cable.
- Choose Custom.
- Choose Automatic IP address settings.
- Do Not Specify DHCP Hostname.
- Choose Manual, Under DNS Settings.
- Enter (8.8.8.8) as Primary and (8.8.4.4) as Secondary DNS.
- Choose Automatic Under MTU Settings.
- Proxy Server Do not use.
- You can now test your internet connection.
Дмитрий, о боже! Я и не думал, что их так много, однозначно спасибо, пусть и на английском.
Ниже ссылка на часть "популярных ошибок" с описанием на русском языке.
Металлический охотник за трофеями
Карма: 6869 ( 10) 13197
Гарнитура:
cLab1u
Yoodley is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
The PS4 LAN cable connection issue started 4-5 years ago and it is still affecting some devices. Some people are unable to find a solution, so they have to rely on Wi-Fi, if you are one of them, trying the solutions mentioned in this guide may fix the issue, and you will be able to enjoy your high-speed internet using a LAN cable.
There are multiple reasons behind this issue. Some PS4 Pro users have reported facing this message right after upgrading their PS4 firmware, and for some people, the issue was a faulty cable or ethernet port. In this guide, we have covered every known solution, so no matter what’s causing “PS4 Lan Cable Not Connected”, you will be able to fix it quickly.
Just keep in mind that you may have to try multiple or all the solutions we have included. You may have to change the PS4 DNS, replace the dynamic IP with a static IP, reinstall the firmware, e.t.c. Our detailed steps are very easy to follow for both techies and beginners with little to no tech knowledge.
Читайте также: