Autocad не устанавливается после удаления
Во время установки автокаду не хватило места на жестком диске и он не установился полностью.
Я его удалил. почистил реестр с помощью специальной утилиты и вручную.
При повторной установке он заявляет, что уже установлен и устанавливаться отказывается.
Подскажите что делать пожалуйста.
заранее спасибо.
--- Обращение ко мне - на "ты". Все, что сказано - личное мнение. |
Clean installation of AutoCAD Civil 3D 2010
Published date: 2009-May-13
ID: TS1108209
Applies to:
AutoCAD® Civil 3D® 2010
Issue
There are instances when you may experience problems or issues with the original installation of AutoCAD® Civil 3D® 2010. In these cases, it is strongly recommended that you completely remove AutoCAD Civil 3D 2010 from the system and then attempt a new installation on the system.
To uninstall AutoCAD® Civil 3D® 2010 and remove any remnants of this product from the system, follow these steps:
Important! Back up any existing custom Civil 3D 2010 files before you implement the following procedures.
To uninstall AutoCAD Civil 3D 2010
1. Click Start menu (Windows) > Settings > Control Panel.
2. In Control Panel, open Add or Remove Programs (Windows XP), or Programs and Features (Windows Vista).
3. In the Add or Remove Programs (Programs and Features) dialog box, select the AutoCAD Civil 3D 2010 product and click Add/Remove (on Windows XP, click Remove).
4. Click Yes when prompted to confirm that you want to completely remove the application and all of its components.
5. If you are prompted to remove shared files, click No to All, and then click Yes when prompted for confirmation to proceed.
6. After the uninstall procedure has completed, click OK.
7. Restart the computer.
To remove any remaining AutoCAD Civil 3D 2010 files
1. Using Windows Explorer, delete the following Civil 3D 2010 installation folder:
Windows XP and Vista (32-bit)
C:\Program Files\AutoCAD Civil 3D 2010
Windows XP and Vista (64-bit)
C:\Program Files (x86)\AutoCAD Civil 3D 2010
Note: If your operating system is configured to store the Program Files folder on a drive other than the C drive, adjust the file path accordingly.
2. Delete the following folders:
Windows XP
* C:\Documents and Settings\All Users\Application Data\Autodesk\C3D 2010
* C:\Documents and Settings\\Application Data\Autodesk\C3D 2010
* C:\Documents and Settings\\Local Settings\Application Data\Autodesk\C3D 2010
Windows Vista
* C:\Users\\AppData\Roaming\Autodesk\C3D 2010
* C:\Users\\AppData\Local\Autodesk\C3D 2010
* C:\ProgramData\Autodesk\AutoCAD Civil 3D 2010
Note: You need to delete these folders for each Windows user account.
To remove any Civil 3D 2010 entries that remain in the Windows registry
Use the Microsoft® Registry Editor only at your own risk and only after backing up the registry as well as the system.dat and user.dat files as outlined for your operating system in the Microsoft Knowledge Base and in the related solution, TS66513. Additional information about the registry is also contained in the Help topics in the Microsoft Registry Editor.
1. Log on to the computer as a member of the Local Administrators group.
2. Click Start menu (Windows) > Run.
3. In the Run dialog box, enter regedit and click OK.
4. In the Registry Editor, locate the following subkeys and delete them:
* HKEY_CURRENT_USER\Software\Autodesk\AutoCAD\R18.0\ACAD-8000:409
* HKEY_LOCAL_MACHINE\Software\Autodesk\AutoCAD\R18.0\ACAD-8000:409
5. Close the Registry Editor.
6. Restart the computer.
AutoCAD Civil 3D 2010 has now been completely removed from your computer.
Before reinstalling AutoCAD Civil 3D 2010
1. In Windows Explorer, delete the contents of your Windows Temp folder. You can locate the Temp folder by entering %TEMP% in the Address bar of Windows Explorer.
2. Use the End Task feature to end any anti-virus programs.
Note: Disabling anti-virus programs from the system tray may not be sufficient. Virus checking programs may block certain activities that are seen as suspicious (for example, accessing the registry, adding, removing, and updating DLL files, and so on), even though these activities are common when installing or removing programs.
Several anti-virus programs can be disabled by right-clicking the taskbar icon and selecting Disable from the shortcut menu. For more information about disabling your anti-virus software, refer to the vendor of that software.
Important! It is important that you not only disable the anti-virus software but also use the End Task feature to end the anti-virus software.
To verify that an anti-virus program is not running in the background as a TSR (Terminate and Stay Resident Program)
1. Press CTRL+ALT+DELETE.
2. Click Task Manager.
3. In Task Manager, click the Processes tab.
4. Select the process for the anti-virus program, and then click End Process.
Во время установки или переустановки программы AutoCAD некоторые пользователи сталкиваются с проблемой, когда процесс прерывается ошибкой с текстом “Более новая версия приложения уже установлена на этом компьютере. Если необходимо установить эту версию, удалите более новую”.
В данной статье мы рассмотрим причины появления данной ошибки, а также методы ее устранения.
Причины появления
Чаще всего при установке AutoCAD пишет что он уже установлен из-за того, что его предыдущая установка или удаление не были завершены корректно. В системном реестре остались остатки приложения и именно из-за них установщик AutoCAD думает, что программа все еще присутствует на компьютере.
Удаление (деинсталляция)
Что делать?
Так как причины ошибки кроются в неудаленных остатках программы, то это значит, что для устранения проблемы эти остатки нужно удалить.
Ручным поиском по всему реестру мы заниматься не будем. Ведь что – то удалять в нем нужно с особой осторожностью.
Лучше всего воспользоваться программой Uninstall Tool. Это бесплатное приложение, которое поможет Вам удалить любую игру или программу, причем вычистив за ней все остатки из системного реестра.
Для начала скачиваем и устанавливаем Uninstall Tool по ссылке ниже.
Далее запускаем установленную программу. В главном окне будут отображены все установленные на вашем компьютере программы.
Все установленные на компьютере программы
Обратите внимание, нет ли среди них чего – то связанного с автокадом. Если есть – поочередно удаляем, нажимая правой кнопкой мыши, выбирая “Принудительное удаление” и соглашаясь со всеми задаваемыми вопросами.
Принудительно удаление остатков автокада
Далее внизу окна переходим на вкладку “Системные” и проделываем тоже самое – ищем любые упоминания автокада и принудительно их удаляем.
Удаление остатков автокада с вкладки “Системные” программы uninstall tool
Также проверяем вкладку “Скрытые”.
После того, как на всех трех вкладках программы Uninstall Tool вы принудительно удалили все остатки AutoCAD, нужно перезагрузить компьютер и попробовать его установить. Ошибки “Более новая версия приложения уже установлена на этом компьютере. Если необходимо установить эту версию, удалите более новую” больше появляться не должно.
Во время установки автокаду не хватило места на жестком диске и он не установился полностью.
Я его удалил. почистил реестр с помощью специальной утилиты и вручную.
При повторной установке он заявляет, что уже установлен и устанавливаться отказывается.
Подскажите что делать пожалуйста.
заранее спасибо.
--- Обращение ко мне - на "ты". Все, что сказано - личное мнение. |
Clean installation of AutoCAD Civil 3D 2010
Published date: 2009-May-13
ID: TS1108209
Applies to:
AutoCAD® Civil 3D® 2010
Issue
There are instances when you may experience problems or issues with the original installation of AutoCAD® Civil 3D® 2010. In these cases, it is strongly recommended that you completely remove AutoCAD Civil 3D 2010 from the system and then attempt a new installation on the system.
To uninstall AutoCAD® Civil 3D® 2010 and remove any remnants of this product from the system, follow these steps:
Important! Back up any existing custom Civil 3D 2010 files before you implement the following procedures.
To uninstall AutoCAD Civil 3D 2010
1. Click Start menu (Windows) > Settings > Control Panel.
2. In Control Panel, open Add or Remove Programs (Windows XP), or Programs and Features (Windows Vista).
3. In the Add or Remove Programs (Programs and Features) dialog box, select the AutoCAD Civil 3D 2010 product and click Add/Remove (on Windows XP, click Remove).
4. Click Yes when prompted to confirm that you want to completely remove the application and all of its components.
5. If you are prompted to remove shared files, click No to All, and then click Yes when prompted for confirmation to proceed.
6. After the uninstall procedure has completed, click OK.
7. Restart the computer.
To remove any remaining AutoCAD Civil 3D 2010 files
1. Using Windows Explorer, delete the following Civil 3D 2010 installation folder:
Windows XP and Vista (32-bit)
C:\Program Files\AutoCAD Civil 3D 2010
Windows XP and Vista (64-bit)
C:\Program Files (x86)\AutoCAD Civil 3D 2010
Note: If your operating system is configured to store the Program Files folder on a drive other than the C drive, adjust the file path accordingly.
2. Delete the following folders:
Windows XP
* C:\Documents and Settings\All Users\Application Data\Autodesk\C3D 2010
* C:\Documents and Settings\\Application Data\Autodesk\C3D 2010
* C:\Documents and Settings\\Local Settings\Application Data\Autodesk\C3D 2010
Windows Vista
* C:\Users\\AppData\Roaming\Autodesk\C3D 2010
* C:\Users\\AppData\Local\Autodesk\C3D 2010
* C:\ProgramData\Autodesk\AutoCAD Civil 3D 2010
Note: You need to delete these folders for each Windows user account.
To remove any Civil 3D 2010 entries that remain in the Windows registry
Use the Microsoft® Registry Editor only at your own risk and only after backing up the registry as well as the system.dat and user.dat files as outlined for your operating system in the Microsoft Knowledge Base and in the related solution, TS66513. Additional information about the registry is also contained in the Help topics in the Microsoft Registry Editor.
1. Log on to the computer as a member of the Local Administrators group.
2. Click Start menu (Windows) > Run.
3. In the Run dialog box, enter regedit and click OK.
4. In the Registry Editor, locate the following subkeys and delete them:
* HKEY_CURRENT_USER\Software\Autodesk\AutoCAD\R18.0\ACAD-8000:409
* HKEY_LOCAL_MACHINE\Software\Autodesk\AutoCAD\R18.0\ACAD-8000:409
5. Close the Registry Editor.
6. Restart the computer.
AutoCAD Civil 3D 2010 has now been completely removed from your computer.
Before reinstalling AutoCAD Civil 3D 2010
1. In Windows Explorer, delete the contents of your Windows Temp folder. You can locate the Temp folder by entering %TEMP% in the Address bar of Windows Explorer.
2. Use the End Task feature to end any anti-virus programs.
Note: Disabling anti-virus programs from the system tray may not be sufficient. Virus checking programs may block certain activities that are seen as suspicious (for example, accessing the registry, adding, removing, and updating DLL files, and so on), even though these activities are common when installing or removing programs.
Several anti-virus programs can be disabled by right-clicking the taskbar icon and selecting Disable from the shortcut menu. For more information about disabling your anti-virus software, refer to the vendor of that software.
Important! It is important that you not only disable the anti-virus software but also use the End Task feature to end the anti-virus software.
To verify that an anti-virus program is not running in the background as a TSR (Terminate and Stay Resident Program)
1. Press CTRL+ALT+DELETE.
2. Click Task Manager.
3. In Task Manager, click the Processes tab.
4. Select the process for the anti-virus program, and then click End Process.
авось
A rich repository of more than a million contributions from Autodesk, its community, and its partners
авось
Бесплатный сервис Google позволяет мгновенно переводить слова, фразы и веб-страницы с английского на более чем 100 языков и обратно.
Химера
alpha
Химера
авось
Химера
gro67
авось
авось
Химера
авось
Химера
Loneliness
gro67
alpha
Будет ли работать SSD M.2 накопитель с физическим интерфейсом PCI-E 4.0 x4 на материнке с PCIe 3.0 x4?
Кто уже пробовал отечественный Astra Linux? Я при установке на ноут поначалу поржал с растровых шрифтов а-ля RedHat 20-летней давности, но оказалось - вполне ничего себе. Шустренько, особенно на старом железе. Репозитарий маловат, но собственно изначально заточен под офис, а не Steam. Вобщем, мне понравился. А вам?
Народ, на Али курс пришел в "норму", ну почти, 90-92 за уе. Цены снова приемлемые, кто чего не успел купить, или впрок, или "ипмпортозамещение" - не зевайте. Времена сами знаете какие и сколько такой курсовой перекос сохранится? Даже Д*С не успевает так пересчитать у них 128 м2 нвме стоит 2600, на али -1700-1800.
В связи с частыми вопросами на тему установки, удаления и переустановки AutoCAD решил обобщить информацию в отдельную заметку.
Переустановка (Reinstall) и Восстановление (Repair)
Что касается переустановки. Разработчики настоятельно рекомендуют перед тем как принимать решение о переустановке или удалению запустить процедуру Восстановление (Repair) через Панель управления Windows.
Если восстановление не помогло, то необходимо сначала удалить, а потом установить ПО заново. Также рекомендуется предварительно создать Точку аварийного восстановления системы (System restore point) и сделать копии важных данных.
1. Перезагрузите компьютер
Перезагрузка нужна для того, чтобы применились все обновления, которые могли быть установлены во время текущей сессии работы.
2. Очистите папку временных файлов
Очистите папку C:\Windows\Temp. Если вы не знаете, где находится стандартная папка для временных файлов, то введите в адресной строке Проводника Windows строку %TEMP%, система откроет искомую папку
ВАЖНО! Нужно удалить файлы из папки Temp, но не саму папку.
3. Закройте все запущенные приложения
Запущенные приложения могут использовать системные файлы и ресурсы, которые, возможно, необходимо будет изменить при установке, но они будут заблокированы. Поэтому и рекомендуется закрывать запущенные приложения.
4. Приостановите работу антивирусной программы
Отключите антивирусное программное обеспечение на вашей компьютере. В процессе установки программа-инсталлятор производит стандартные действия: изменяет реестр, добавляет/удаляет/обновляет DLL-файлы и пр. Однако, многие антивирусы могут распознавать эти процессы как опасные и блокировать их, что сделает установку невозможной. кроме того, работа антивируса во время установки значительно замедляет работу системы, т.к. происходит постоянная проверка копируемых файлов. Большинство антивирусных программ можно отключить, если нажать правой кнопкой мыши на иконку в трее.
Читайте также: