Acronis backup код ошибки 100011
This article features error number Code 0x4001A, commonly known as Acronis Error Code 0X4001A described as Error 0x4001A: Acronis PC Backup & Recovery has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Information
This repair tool can fix common computer errors like BSODs, system freezes and crashes. It can replace missing operating system files and DLLs, remove malware and fix the damage caused by it, as well as optimize your PC for maximum performance.
About Runtime Code 0x4001A
Runtime Code 0x4001A happens when Acronis PC Backup & Recovery fails or crashes whilst it's running, hence its name. It doesn't necessarily mean that the code was corrupt in some way, but just that it did not work during its run-time. This kind of error will appear as an annoying notification on your screen unless handled and corrected. Here are symptoms, causes and ways to troubleshoot the problem.
Definitions (Beta)
Here we list some definitions for the words contained in your error, in an attempt to help you understand your problem. This is a work in progress, so sometimes we might define the word incorrectly, so feel free to skip this section!
- Backup - The act of saving one's files, data, applications, etc
- Error code - An error code is a value returned to provide context on why an error occurred
- Pc - Anything about personal computers.
- Recovery - Use this tag on any questions related to data recovery in contrast to data restore.
Symptoms of Code 0x4001A - Acronis Error Code 0X4001A
Runtime errors happen without warning. The error message can come up the screen anytime Acronis PC Backup & Recovery is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.
There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.
(For illustrative purposes only)
Causes of Acronis Error Code 0X4001A - Code 0x4001A
During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.
Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.
Repair Methods
Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.
If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.
You have Acronis Management Server installed on a Linux machine.
You open the management console and navigate to Settings -> System Settings.
"Internal server error. Error code 100011" appears.
In HAR log, you see these messages:
In WebServer log (log can be found under /var/lib/Acronis/WebServer) you see this error message:
File "/usr/lib/Acronis/PyShell/stdlib.zip/socket.py", line 711, in create_connection
raise err
File "/usr/lib/Acronis/PyShell/stdlib.zip/socket.py", line 702, in create_connection
sock.connect(sa)
ConnectionRefusedError: [Errno 111] Connection refused
Full error message
2017-06-26 12:17:20,878 140559673751296 | 00000000-0000-0000-0000-000000000000 | +GET | /api/ams/settings/email_notification? | handler: wcs.model.descriptor.resource.handle_request | session:
2017-06-26 12:17:20,881 140559673751296
Traceback (most recent call last):
File "/usr/lib/Acronis/PyShell/stdlib.zip/urllib/request.py", line 1254, in do_open
h.request(req.get_method(), req.selector, req.data, headers)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 1106, in request
self._send_request(method, url, body, headers)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 1151, in _send_request
self.endheaders(body)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 1102, in endheaders
self._send_output(message_body)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 934, in _send_output
self.send(msg)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 877, in send
self.connect()
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 849, in connect
(self.host,self.port), self.timeout, self.source_address)
File "/usr/lib/Acronis/PyShell/stdlib.zip/socket.py", line 711, in create_connection
raise err
File "/usr/lib/Acronis/PyShell/stdlib.zip/socket.py", line 702, in create_connection
sock.connect(sa)
ConnectionRefusedError: [Errno 111] Connection refused
Cause
Acronis notification service fails to start.
Step 1:Check Acronis notification service status
Check whether Acronis notification service is running:
ps ax | grep –i notification_service
If the service is not running, check Acronis notification logs located in /var/lib/Acronis/NotificationService/notification_service.log
If you see the "[Errno 99] Cannot assign requested address" error, the service fails to start because the required port is not available or because of an address resolution issue (the issue might occur when IPv6 is disabled but localhost is still resolved to IPv6 instead of IPv4).
Step 2: Check port 30572
Using the netstat command, check whether port 30572 is busy:
netstat -a | grep 30572
If you do not get any output, the port is free. Proceed to the next step. Alternatively, you will see that the port is in use. If possible, set up another port for the software that uses 30572.
Step 3: check IPv6 settings
If the port is available, check address resolution. Issue:
ifconfig
Check the output for an IPv6 address. If the output does not contain an IPv6 address, IPv6 is disabled on the machine.
Now check /etc/hosts. If you see ::1 localhost ip6-localhost ip6-loopback, localhost is resolved into an IPv6 address instead of an IPv4 address.
Remove localhost from this line. Is should look like:
::1 ip6-localhost ip6-loopback
Restart Acronis Management Server service using one of the following commands (or reboot the machine if possible):
service acronis_ams restart
or
systemctl restart acronis_ams.service
After service restart the settings of Acronis Cyber Backup will be accessible.
If these steps have not resolved the issue, contact Acronis Customer Central.
You have Acronis Management Server installed on a Linux machine.
You open the management console and navigate to Settings -> System Settings.
"Internal server error. Error code 100011" appears.
In HAR log, you see these messages:
In WebServer log (log can be found under /var/lib/Acronis/WebServer) you see this error message:
File "/usr/lib/Acronis/PyShell/stdlib.zip/socket.py", line 711, in create_connection
raise err
File "/usr/lib/Acronis/PyShell/stdlib.zip/socket.py", line 702, in create_connection
sock.connect(sa)
ConnectionRefusedError: [Errno 111] Connection refused
Full error message
2017-06-26 12:17:20,878 140559673751296 | 00000000-0000-0000-0000-000000000000 | +GET | /api/ams/settings/email_notification? | handler: wcs.model.descriptor.resource.handle_request | session:
2017-06-26 12:17:20,881 140559673751296
Traceback (most recent call last):
File "/usr/lib/Acronis/PyShell/stdlib.zip/urllib/request.py", line 1254, in do_open
h.request(req.get_method(), req.selector, req.data, headers)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 1106, in request
self._send_request(method, url, body, headers)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 1151, in _send_request
self.endheaders(body)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 1102, in endheaders
self._send_output(message_body)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 934, in _send_output
self.send(msg)
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 877, in send
self.connect()
File "/usr/lib/Acronis/PyShell/stdlib.zip/http/client.py", line 849, in connect
(self.host,self.port), self.timeout, self.source_address)
File "/usr/lib/Acronis/PyShell/stdlib.zip/socket.py", line 711, in create_connection
raise err
File "/usr/lib/Acronis/PyShell/stdlib.zip/socket.py", line 702, in create_connection
sock.connect(sa)
ConnectionRefusedError: [Errno 111] Connection refused
Cause
Acronis notification service fails to start.
Step 1:Check Acronis notification service status
Check whether Acronis notification service is running:
ps ax | grep –i notification_service
If the service is not running, check Acronis notification logs located in /var/lib/Acronis/NotificationService/notification_service.log
If you see the "[Errno 99] Cannot assign requested address" error, the service fails to start because the required port is not available or because of an address resolution issue (the issue might occur when IPv6 is disabled but localhost is still resolved to IPv6 instead of IPv4).
Step 2: Check port 30572
Using the netstat command, check whether port 30572 is busy:
netstat -a | grep 30572
If you do not get any output, the port is free. Proceed to the next step. Alternatively, you will see that the port is in use. If possible, set up another port for the software that uses 30572.
Solution
Solution
Step 3: check IPv6 settings
If the port is available, check address resolution. Issue:
ifconfig
Check the output for an IPv6 address. If the output does not contain an IPv6 address, IPv6 is disabled on the machine.
Now check /etc/hosts. If you see ::1 localhost ip6-localhost ip6-loopback, localhost is resolved into an IPv6 address instead of an IPv4 address.
Remove localhost from this line. Is should look like:
::1 ip6-localhost ip6-loopback
Restart Acronis Management Server service using one of the following commands (or reboot the machine if possible):
service acronis_ams restart
or
systemctl restart acronis_ams.service
After service restart the settings of Acronis Cyber Backup will be accessible.
If these steps have not resolved the issue, contact Acronis Customer Central.
В этой статье представлена ошибка с номером Ошибка 41 Модуль 307, известная как Код ошибки 41 Acronis Backup 307, описанная как Ошибка 41 Module 307: Возникла ошибка в приложении Acronis PC Backup & Recovery. Приложение будет закрыто. Приносим свои извинения за неудобства.
Информация об ошибке
Имя ошибки: Код ошибки 41 Acronis Backup 307
Номер ошибки: Ошибка 41 Модуль 307
Описание: Ошибка 41 Module 307: Возникла ошибка в приложении Acronis PC Backup & Recovery. Приложение будет закрыто. Приносим свои извинения за неудобства.
Программное обеспечение: Acronis PC Backup & Recovery
Разработчик: Acronis International GmbH
Этот инструмент исправления может устранить такие распространенные компьютерные ошибки, как BSODs, зависание системы и сбои. Он может заменить отсутствующие файлы операционной системы и библиотеки DLL, удалить вредоносное ПО и устранить вызванные им повреждения, а также оптимизировать ваш компьютер для максимальной производительности.
О программе Runtime Ошибка 41 Модуль 307
Время выполнения Ошибка 41 Модуль 307 происходит, когда Acronis PC Backup & Recovery дает сбой или падает во время запуска, отсюда и название. Это не обязательно означает, что код был каким-то образом поврежден, просто он не сработал во время выполнения. Такая ошибка появляется на экране в виде раздражающего уведомления, если ее не устранить. Вот симптомы, причины и способы устранения проблемы.
Определения (Бета)
Здесь мы приводим некоторые определения слов, содержащихся в вашей ошибке, в попытке помочь вам понять вашу проблему. Эта работа продолжается, поэтому иногда мы можем неправильно определить слово, так что не стесняйтесь пропустить этот раздел!
- Резервное копирование - Акт сохранения файлов, данных, приложений и т. д.
- Код ошибки - Код ошибки - это значение возвращается, чтобы предоставить контекст о причине возникновения ошибки.
- Модуль - логическое подразделение более крупной и сложной системы.
- ПК - Все, что касается персональных компьютеров.
- Восстановление - используйте этот тег по любым вопросам, связанным с восстановлением данных, а не с восстановлением данных.
Симптомы Ошибка 41 Модуль 307 - Код ошибки 41 Acronis Backup 307
Возможны случаи удаления файлов или появления новых файлов. Хотя этот симптом в основном связан с заражением вирусом, его можно отнести к симптомам ошибки времени выполнения, поскольку заражение вирусом является одной из причин ошибки времени выполнения. Пользователь также может столкнуться с внезапным падением скорости интернет-соединения, но, опять же, это не всегда так.
(Только для примера)
Причины Код ошибки 41 Acronis Backup 307 - Ошибка 41 Модуль 307
При разработке программного обеспечения программисты составляют код, предвидя возникновение ошибок. Однако идеальных проектов не бывает, поскольку ошибки можно ожидать даже при самом лучшем дизайне программы. Глюки могут произойти во время выполнения программы, если определенная ошибка не была обнаружена и устранена во время проектирования и тестирования.
Ошибки во время выполнения обычно вызваны несовместимостью программ, запущенных в одно и то же время. Они также могут возникать из-за проблем с памятью, плохого графического драйвера или заражения вирусом. Каким бы ни был случай, проблему необходимо решить немедленно, чтобы избежать дальнейших проблем. Ниже приведены способы устранения ошибки.
Методы исправления
Ошибки времени выполнения могут быть раздражающими и постоянными, но это не совсем безнадежно, существует возможность ремонта. Вот способы сделать это.
Если метод ремонта вам подошел, пожалуйста, нажмите кнопку upvote слева от ответа, это позволит другим пользователям узнать, какой метод ремонта на данный момент работает лучше всего.
This article features error number Code 22 Module 309, commonly known as Acronis Backup And Recovery 11 Error Code 22 Module 309 described as Error 22 Module 309: Acronis PC Backup & Recovery has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Information
This repair tool can fix common computer errors like BSODs, system freezes and crashes. It can replace missing operating system files and DLLs, remove malware and fix the damage caused by it, as well as optimize your PC for maximum performance.
About Runtime Code 22 Module 309
Runtime Code 22 Module 309 happens when Acronis PC Backup & Recovery fails or crashes whilst it's running, hence its name. It doesn't necessarily mean that the code was corrupt in some way, but just that it did not work during its run-time. This kind of error will appear as an annoying notification on your screen unless handled and corrected. Here are symptoms, causes and ways to troubleshoot the problem.
Definitions (Beta)
Here we list some definitions for the words contained in your error, in an attempt to help you understand your problem. This is a work in progress, so sometimes we might define the word incorrectly, so feel free to skip this section!
- Backup - The act of saving one's files, data, applications, etc
- Error code - An error code is a value returned to provide context on why an error occurred
- Module - A logical subdivision of a larger, more complex system.
- Pc - Anything about personal computers.
- Recovery - Use this tag on any questions related to data recovery in contrast to data restore.
Symptoms of Code 22 Module 309 - Acronis Backup And Recovery 11 Error Code 22 Module 309
Runtime errors happen without warning. The error message can come up the screen anytime Acronis PC Backup & Recovery is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.
There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.
(For illustrative purposes only)
Causes of Acronis Backup And Recovery 11 Error Code 22 Module 309 - Code 22 Module 309
During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.
Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.
Repair Methods
Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.
If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.
Читайте также: