Spike программа для айфона
Увлекательное изучение естественно-научных и технических предметов с приложением LEGO® Education SPIKE™. Это приложение специально предназначено для работы с решениями семейства LEGO® Education SPIKE™
и является функциональным и удобным в использовании инструментом, помогающим педагогам проводить увлекательные практические занятия по предметам STEAM. LEGO® Education SPIKE™ Старт и LEGO® Education SPIKE™ Prime открывают для обучающихся всех возрастов мир практического обучения: от простых экспериментов до сложных проектов с открытыми решениями, направленными на выполнение задач из реальной жизни.
Интуитивно, увлекательно и весело
Приложение SPIKE включает в себя интуитивно понятную среду программирования, которая в сочетании с наборами SPIKE Prime и SPIKE Старт создает адаптивную программно-аппаратную систему, которая понравится и педагогам, и их подопечным. Обучающиеся системно формируют навыки программирования, постепенно переходя от графического программирования к текстовым блокам Scratch, а затем и к программированию на языке Python. Приложение SPIKE дарит возможности для игрового обучения детей с самым разным уровнем подготовки.
Новые методики практического обучения
Помимо материалов для Начала работы с решениями SPIKE Старт и SPIKE Prime, приложение SPIKE включает в себя десять учебных курсов, предлагающих соответствующие ФГОС РФ планы уроков с интегрированными инструкциями по сборке для учеников начальной и основной школы. Они вовлекают обучающихся в процесс осознанного решения задач STEAM с помощью увлекательных уроков, устанавливающих преемственность в формировании ключевых компетенций XXI века как учениками, так и педагогами.
Развитие уверенности в себе при изучении предметов STEAM
Помогите своим ученикам стать уверенными в себе специалистами, развивая у них важнейшие навыки XXI века и предоставляя им безграничные возможности для практического изучения предметов STEAM с помощью решений LEGO®. Решения SPIKE, являющиеся частью системы обучения LEGO, можно внедрять как по отдельности, так и в виде комплексной учебной программы. Они дополняют друг друга и вместе дарят безграничные возможности для обучения. Приложение SPIKE в комплексе с решениями SPIKE Старт и SPIKE Prime дает возможность применять знания на практике и подробно изучать методы программирования и современные IT-технологии. Ученики системно развивают навыки вычислительного мышления, постепенно переходя от графических программных блоков к текстовым, а затем и к использованию объектно-ориентированных текстовых языков программирования. Возможность программирования Хабов SPIKE Старт и SPIKE Prime, использования моторов и датчиков вместе с элементами конструирования LEGO вдохновляет обучающихся на создание, тестирование и улучшение сначала простых, а затем более сложных моделей и механизмов. Они учатся программировать и мыслить как инженеры, тестируют и оптимизируют свои решения, оперируют данными, рассказывают истории мини-фигурок LEGO, готовятся к соревнованиям FIRST® LEGO League и выполняют множество других задач!
*** ВАЖНОЕ ЗАМЕЧАНИЕ ***
Данное приложение не является отдельным решением. Оно предназначено для работы с наборами SPIKE Старт и SPIKE Prime, которые продаются отдельно. За дополнительной информацией обратитесь к локальному дистрибьютору LEGO® Education.
LEGO, the LEGO logo, the Minifigure, and the SPIKE logo are trademarks of the LEGO Group. ©2021 The LEGO Group.
FIRST® is a registered trademark of For Inspiration and Recognition of Science and Technology (FIRST).LEGO® is a registered trademark of the LEGO Group.FIRST® LEGO® League are jointly held trademarks of FIRST and the LEGO Group.
©2021 FIRST and the LEGO Group.All rights reserved
Spike is a research tool developed by members of the open source community and offered for free.
Because we are a non-profit we do not have the necessary means to conduct long-term studies in order to get the necessary approvals to make Spike available on the App Store.
Spike is a research tool only and should be treated as such. Because we’re not subject to any regulators it means we can develop at a faster pace and bring never before released features to the DIYS open source community.
Why do I have to install Spike manually?
Not being on the App Store means each user needs to digitally sign Spike with their own certificate before deploying it to their devices.
We tried using an Enterprise Certificate before to distribute Spike which made the whole process much faster and simpler but it ended up being revoked by Apple due to being in violation of their Guidelines (and Enterprise Certificate can only be distributed to members of a corporation and not to the general public).
Having all users sign their Spike copy with their own certificates ensures we’re not in violation of any Apple Guidelines and users can use Spike without worrying of it being revoked.
What installation method should I choose?
Are you a computer noob, not tech savvy or don’t care much about some Spike features?
Use the Semi-Manual option. It’s easy and compatible with all PC operating systems.
Have in mind that it doesn’t provide HealthKit, automatic iCloud backups/restores and the dedicated Apple Watch app features.
Do you own a Mac or are up to the task of creating a virtual Mac environment? Do you want access to the maximum amount of Spike features? Are you tech savvy?
Use the Manual option. It takes a bit more time and skill to setup initially but once all is set it’s easy to maintain and offers most (if not all) Spike features.
Do you have a jailbroken device or access to a device that can be jailbroken?
Use the Jailbroken method. It’s by far the best one when it comes to the amount of Spike features it provides and the lack of maintenance needed.
Why do I have to regularly re-sign Spike?
Depending of the type of account used to sign Spike the generated certificate will have a validity of 7 days (free regular iCloud/App Store accounts) or 1 year (paid Apple Developer accounts).
Once a certificate expires the user will not be able to open Spike. Having said that, as long as the user re-signs Spike before the certificate expires the app will always work, without any downtime.
Instructions on how to re-sign Spike are available here.
I'm not an app developer. Can I still buy an Apple Developer account?
An Apple Developer account costs 99USD/EUR per year and can be purchased by anyone. To do so, please visit this website.
The whole process should take only a few minutes to complete. Afterwards you can use your newly upgraded account to sign Spike and your certificates will last 1 full year.
After 1 year you’ll need to renew your membership and re-sign Spike to extend it for another full year.
If I reinstall Spike, will I lose my previous settings?
No, as long as you don’t uninstall Spike, you can reinstall it as many times as you want without losing your settings. If you wish to uninstall Spike make sure you first do a backup of your settings or database in Spike’s Settings -> Maintenance. Alternatively you can also backup your database using the Files app (iOS 11+) or by connecting your device to your computer and using iTunes File Sharing.
Can Spike be used in conjunction with the official CGM transmitter app?
No. CGM transmitters can only transmit data to one app at a time. Spike has all the features (and more) of the official apps so it’s recommended that you uninstall them and use Spike exclusively. If the official app has an Apple Watch complication you should uninstall it as well.
Can Spike be translated to other languages?
Yes. Please join the Facebook support group here and ask for instructions on how to translate Spike.
From alerting you of hyper and hypoglycemia events to predicting your glucose up to 4h into the future and allowing you to manage all your treatments, Spike will change the way you handle your diabetes.
Scrollable Chart
Fully customisable. Ability to change colors, size, fonts, etc.
Glucose Distribution
Most relevant stats displayed directly on the home screen.
Data Sharing
Compatible with Nightscout, Healthkit and other services.
Granular Alarms
Tailored to your needs to keep you always up to date.
Spoken Readings
Know your values without having to open the app.
Transmitter Stats
Battery levels, temperature, days since activation, etc.
Treatments
Manage all your treatments in one place: bolus, carbs, meals, basals, exercise, etc.
Glucose Predictions
Predict treatments outcome and glucose levels up to 4h into the future.
Absorption Curves
Keep track of your current IOB/COB and visualize each absorption curve.
Advanced Automation
Connect Spike to IFTTT and automate anything you can think of.
Follower Mode
Use it to follow and manage diabetic friends and family members.
Bolus Calculator & Food Manager
Access nearly one million foods. Let Spike do all the dosing work.
GPU Accelerated Interface
Blaizing fast performance coupled with highly optimised code to give you the smoothest experience possible.
Battery consumption, CPU cycles and memory footprint have been reduced to a minimum. It works great on older devices.
Spike also features 3DTouch support for quick shortcuts to the most used actions and a Today Widget for a quick glance at your glucose values and trend.
Apple Watch Support
See your glucose levels directly on your wrist using a complication, even when you’re offline. Data updates every 5 minutes and can be shared in realtime with other people’s Apple Watch so they can act as followers.
Spike also features a dedicated Apple Watch app with a glucose chart, your most relevant stats and a fullscreen view.
Developed For iOS
Compatible with iPhone 4s+, iPod Touch 5+ and iPad 2+.
Not compatible with Android devices.
The Wait is Finally Over
Before proceeding be to sure read the FAQ section.
Please choose your preferred installation method:
If you don’t mind losing the features listed above, this is by far the easiest and fastest method to install and re-sign Spike for users that don’t have a jailbroken device.
Difficulty Level
Time Required
Downloads
- Spike (Required. Latest Version For Cydia Impactor)
Install Cydia Impactor & Spike
Download Cydia Impactor from the Downloads section. You can save it anywhere you want on your computer (the Desktop or Downloads folders are good candidates). Do the same with Spike’s installation file (ipa). It’s also available in the Downloads section. Be sure to select the correct version (iPhone-iPodTouch vs iPad).
Windows Specific Steps
(Windows 7 has been used for this guide. All steps should be very similar when using other Windows versions)
Go to the folder where you’ve downloaded Impactor. We’ll use the Downloads folder for this guide.
You’ll find a zip file with a name beginning with “Impactor”. Right-click on it and select Extract All.
A small popup will now appear. Press the Extract button.
Windows should automatically open the extracted Cydia Impactor’s folder but if not just double click the newly created folder next to the Cydia Impactor’s zip file you downloaded earlier. Once you’re inside the extracted Cydia Impactor’s folder, double click the application’s file to open it, the one with the wrench icon.
In most cases, Windows will notify you that the publisher has not yet been verified. Just press the Run button.
Now that Cydia Impactor is installed & running, you can proceed to the next (common) step.
Mac Specific Steps
(MacOS Mojave has been used for this guide. All steps should be very similar when using other MacOS versions)
Go to the folder where you’ve downloaded Cydia Impactor. We’ll use the Downloads folder for this guide.
You’ll find a dmg file with a name beginning with “Impactor”. Double click to open it.
A popup will open. Select the Cydia Impactor file on the left, drag & drop it on the Applications shortcut folder on the right. This will copy the Cydia Impactor app to your computer Application’s folder.
Now that Cydia Impactor has been properly installed on your Mac, open it. You can do this by searching for it using Spotlight, by manually navigating to the Applications folder on your Mac and double clicking the Cydia Impactor app, etc.
If you see the following popup when you first open Cydia Impactor, just press OK.
Similarly, if your Mac complains that Cydia Impactor is an app downloaded from the Internet, just press Open.
Finally, depending on your security settings, it’s possible that your Mac will complain that Cydia Impactor hasn’t been downloaded from the App Store and doesn’t allow you to open it. If that’s the case just press OK on that popup.
Now go to your Mac’s System Preferences. One way to get there is by pressing the Apple logo located at the top left corner of your screen and clicking the System Preferences menu item.
Go to the Security & Privacy section.
Finally press the Open Anyway button to authorize Cydia Impactor. The app should now open and your Mac should not complain again the next time you try to open the app.
Now that the Cydia Impactor application is installed and running, you can proceed to the next (common) step.
Linux Specific Steps
(Ubuntu 14.04 has been used for this guide)
Go to the folder where you’ve downloaded Impactor. We’ll use the Downloads folder for this guide.
You’ll find a tgz file with a name beginning with “Impactor”. Right click on it and select Extract Here.
A new folder will be created next to the Cydia Impactor tgz file you just extracted. Open the folder.
Inside you’ll find the Cydia Impactor’s executable file. Double click to open it.
Now that the Cydia Impactor application is installed and running, you can proceed to the next (common) step.
Common Steps
Connect your iOS device, via USB, to your computer while Cydia Impactor is opened. After a few seconds you should see your device’s name and UDID number inside the app. If you can’t see your phone’s name and UDID or a ? symbol is shown please refer to the Troubleshooting section.
To install Spike, DON’T CLICK THE START BUTTON IN CYDIA IMPACTOR, just drag & drop Spike’s ipa file, the one you’ve downloaded previously from the Downloads section, into Cydia Impactor.
To clarify, this is what dragging & droppping an ipa file into Cydia Impactor means:
Cydia Impactor will now ask you for your Apple credentials. If you plan on using a free account, you can use your own iCloud/App Store account or create a new one in a few minutes just for Spike here. Cydia Impactor also supports paid Apple Developer accounts.
Once your credentials have been inserted and validated, Cydia Impactor will begin installing Spike into your device. The whole process can take up to 20-30 seconds to complete. If something goes wrong, please refer to the Troubleshooting section.
When the installation process finishes, you should see Spike’s icon on your device’s home screen. If you can’t see the icon, try restarting your device. Once restarted, the icon should be there on your home screen. If not then swipe down anywhere on your home screen, search for “spike” (without quotes) and open it. The icon should appear afterwards.
If, when opening Spike for the first time, a popup appears stating that the app was signed with an untrusted developer certificate, please go to iOS Settings > General > Profiles & Device Management > [Your Email Address] and press Trust. You should now be able to open and use Spike without any issues.
Re-sign Spike
This is a very important topic so please be sure to give it proper attention.
If you used a free regular Apple iCloud/App Store account to install Spike, the app will be valid for 7 days, if you used a paid Apple Developer account Spike will last 1 entire year.
You can and should avoid expiration in order to have Spike running without any downtime. Before Spike expires just connect your device to your computer and reinstall Spike. Don’t delete your previously installed Spike, leave it as is and reinstall Spike on top of the existing one. This will keep all your data and settings and will renew the expiration date.
As long as you re-sign/re-install Spike before it expires, it will run forever.
Re-signing/re-installing should take less than 30 seconds. Just perform the installation steps again, starting here. Be sure to use the same Apple account when re-signing Spike in order to keep all your data and settings.
You’ll need to perform these steps once a week if you’re using a free regular Apple iCloud/App Store account or once a year if you’re using a paid Apple Developer account, or every time you want to upgrade Spike when a new update is released.
Update Spike
When a new Spike update is released just download the new ipa file from this page and perform the same instructions described in the Re-sign section of this guide.
Check Spike’s Expiration
You can check when Spike is going to expire by pressing the Info Pill on the main screen. Spike will also notify you when it’s time to re-sign in order to avoid expiration and downtime.
For free accounts Spike will notify you 24h, 12h and 1h before it expires. It will also notify you after it has expired. If the certificate expires, Spike will continue to run until you close it from the app switcher. Once you close it you will not be able to re-open it again until you re-sign it.
Paid accounts have the same expiration notices plus 2 extra ones: 1 week and 3 days before the app expires.
If you can’t see the Info Pill on your Spike home screen you can activate it by going to Settings > Treatments > Info Pill.
Troubleshooting
Can’t Open Spike. It Says “Untrusted Developer”
Please go to iOS Settings > General > Profiles & Device Management > [Your Email Address] and press Trust. You should now be able to open Spike.
My Device’s Name Or UDID Number Doesn’t Show Up In Cydia Impactor, Or I Can Se A ? Mark Instead Of The Phone’s Name
This can happen when your device is not correctly paired to your computer. Disconnect your device from the USB cable and connect it again, make sure that if a popup appears on your device with the Trust This Computer? title you press the Trust button.
If the popup doesn’t appear, disconnect your device from the USB cable, go to iOS Settings > General > Reset and press the Reset Location & Privacy option. If you connect your device again via USB, the popup should now appear.
If, after you trusted your computer, Cydia Impactor still can’t connect properly to your device, disconnect the USB cable, do a Reset Location & Privacy once again, open iTunes on your computer and reconnect your phone via USB. Besides the Trust This Computer? popup, iTunes should also ask you if you want to pair your device, select Continue and be sure to press Trust in the popup displayed on iOS. Afterwards it’s a good idea to also do a sync in iTunes. This will make iTunes properly pair your device. In case you don’t have iTunes installed you can download it from the Downloads section.
If your phone’s name still doesn’t show up in Cydia Impactor, try connecting it to a different USB port or using a different USB cable. Either your port or your cable might be damaged.
LOCKDOWN Error
This is the same as the previous error, you need to properly pair your device with your computer. Please follow the steps described above.
App-Specific Password Error
Under the Security section create a new app-specific password and copy it. You should probably save this password in an easily accessible place for subsequent re-signs/re-installs otherwise you’ll have to go through this whole process of creating an app-specific password again.
Now go back to Cydia Impactor, drag & drop Spike’s ipa file, insert your Apple ID and, on the next screen, instead of inserting your Apple account password insert this new app-specific password you’ve just created.
Provision CPP Line 81 Error
This is a very common error and tends to happen with free Apple accounts. Free accounts can only have a maximum of 2 active certificates and Cydia Impactor is notifying you that there are no free slots for more certificates. We can solve this by revoking your previous active certificates.
To do this, go to the Xcode menu, select Revoke Certificates and input your Apple ID and password.
If all goes well, Cydia Impactor will notify you that x number of certificates have been revoked. You can now try to install Spike again.
If Cydia Impactor tells you that it revoked 0 (zero) certificates it means something went wrong. To fix this, go to the Downloads section and download the CertificateManager app for your operating system. Using this app, login with your Apple ID credentials and you will be able to delete/revoke your existing certificates (listed on the home screen). Afterwards, you can install Spike using Cydia Impactor.
The ‘Network Extensions’ Feature is Only Available to Users Enrolled in Apple Developer Program
You’re not dragging Spike’s ipa file onto Cydia Impactor. You probably skipped this step in the guide:
“ To install Spike, just drag & drop Spike’s ipa file, the on you downloaded previously from the Downloads section, into Cydia Impactor.”
This Apple ID Cannot Be Used For Development With Xcode
This issue happens when you’re trying to use an Apple ID of an underage individual to install Spike. Apple doesn’t allow minors to deploy apps with their personal accounts.
Your maximum App ID limit has been reached
This error only happens with free regular Apple iCloud/App Store accounts. Spike needs 5 different App IDs to be created in order to be installed on a device. 1 app id for each of these components: main app, chart today widget, full screen today widget, apple watch app & apple watch extension.
Free Apple accounts may create up to 10 App IDs every 7 days. Your account has reached this limit.
Problem With The SSL CA Cert
In Cydia Impactor’s upper menu select Impactor > Insecure SSL.
Try to install Spike once again.
The Executable Was Signed With Invalid Entitlements
This issue seems to happen sporadically in older versions of iOS, especially version 10. This is actually a bug in Apple’s servers.
You can try to go to the Xcode menu in Cydia Impactor and revoke all certificates. See if this fixes it.
If you still can’t install Spike we recommend that you jailbreak your device and use the Jailbroken Method (ReProvision). This is by far the best method when it comes to the amount of Spike features it offers and the fact that it doesn’t require any maintenance. If your device is not eligible for a jailbreak try using the Manual Method (Xcode)
Приложения для электронной почты являются популярной категорией в App Store по одной простой причине — почти всем нам нужен доступ к письмам на iPhone и iPad. В то время как у Apple есть собственное приложение Mail, интегрированное в iOS, некоторые пользователи хотят иметь больше возможностей. К счастью, есть много разработчиков, которые пытаются создать идеальный почтовый клиент для iOS. Сегодня как раз поговорим о некоторых из них.
Spike
Spike — бесплатный почтовый клиент, который отличается стилизованным под Google внешним видом. Цель приложения состоит в том, чтобы превратить электронную почту в нечто большее, чем просто набор писем, организуя всю почту в единый чат.
Название: Spike
Цена: Бесплатно
Совместимость: Универсальное приложение
Ссылка: Установить
Polymail
Polymail, еще один бесплатный клиент, является более традиционным почтовым приложением. У него удобный и «чистый» интерфейс с полезной функцией комментариев и упоминаний.
В iOS Polymail предлагает такие полезные функции, как быстрые теги, прочтение писем позже и уведомления о прочтении, чтобы вы знали, что кто-то получил и прочитал ваше письмо. Другие уникальные функции включают возможность приглашения в календарь, отписку от рассылок в один клик, планирование электронной почты, отслеживание кликов и вложений и многое другое.
Название: Polymail
Цена: Бесплатно
Совместимость: Универсальное приложение
Ссылка: Установить
Airmail
Airmail уже стоит 379 рублей. Сначала это был почтовый клиент для компьютеров Mac, однако затем его разработали для iOS. Airmail — это простое почтовое приложение с акцентом на минимализм. Здесь есть папка «Все входящие» для быстрого управления электронной почтой, а если вы проведете пальцем по левому краю, появится доступ к папкам для списков дел, отложенных писем и вложений, что удобно для поиска определенного содержимого.
Airmail совместим с большим количеством других сервисов и приложений, поэтому вы можете интегрировать приложения, которые вы уже используете, с вашим почтовым клиентом. Интерфейс понравится не всем, но у Airmail есть важная фишка в виде кроссплатформенности.
Название: Airmail
Цена: Бесплатно
Совместимость: Универсальное приложение
Ссылка: Установить
Spark
Электронные письма автоматически подразделяются на разделы, в которые входят «Личные», «Уведомления» и «Рассылки». Spark обладает мощной поисковой системой, которая позволяет легко находить любую электронную почту, что нам очень понравилось в приложении. Поэтому пользуемся всей редакцией.
У Spark есть инструменты для обсуждения и совместной работы над электронной почтой, и это одно из немногих почтовых приложений с такими возможностями. Плюс есть умные уведомления, так что вы смотрите почту только тогда, когда пришло что-то действительно важное.
Название: Spark
Цена: Бесплатно
Совместимость: Универсальное приложение
Ссылка: Установить
Из всех вышеперечисленных почтовых приложений нам больше всего понравился Spark. Если вы ищете новое приложение для электронной почты, чтобы попробовать, стоит взглянуть на все в этом списке.
Мы пропустили ваше любимое почтовое приложение? Напишите об этом в комментариях и в нашем Telegram-чате.
Читайте также: