Qt программа завершилась с ошибкой command aborted
The problem appeared after upgrading qtcreator from 4.14.1 to 5.0.1
Going back to 4.14.1 resolves the issue.
New project -> Application (Qt) -> Qt Console Application
Build system qmake, next, next, .
(the standard kit x64, no cross compiling)
The qtcreator will create a simple app with main.cpp and a pro file.
Place a breakpoint wherever within int main and press "Start debugging of startup project". At this point everything works as expected: the program hits the breakpoint
Now choose: Project -> -> Run and check "Run in terminal" and try to debug again. You will get a popup saying "Command aborted" with Title "Executable Failed - Qt. "
>&"Cannot insert breakpoint 1.\n"
>&"Cannot access memory at address 0x1205\n"
dCOOKIE FOR TOKEN 70 ALREADY EATEN (InferiorRunOk). TWO RESPONSES FOR ONE COMMAND?
dNOTE: INFERIOR SPONTANEOUS STOP
dState changed from InferiorRunOk(7) to InferiorStopOk(10)
Executable failed: Command aborted.
dCOOKIE FOR TOKEN 0 ALREADY EATEN (InferiorStopOk). TWO RESPONSES FOR ONE COMMAND?
-------------------------------------
I can reproduce it on both Ubuntu 18.04 and 20.04 and also on kubuntu 18.04.All with distribution default GDB and gcc/g++.
Affected version of QT creator: 5.0.1
Switching back to 4.14.1 solves the problem.
My system GDB (on ubuntu 20.04) is 9.2. I thought that it may be an issue with GDB so I have tried some older one (8.1.1) but the problem persists.
One may find it interesting that by default the binary created by the gcc with default .pro file is:
untitled: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID [sha1] =3e415d6a4d24ef946d2b4418657a50680db34ca5, for GNU/Linux 3.2.0, with debug_info, not stripped
and in the case above (shared object) the problem exists.
If one adds to the .pro file QMAKE_LFLAGS += -no-pie and rebuild we get:
untitled: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID [sha1] =46458e9cf4c5b29d6259edfb2875b9589d54822d, for GNU/Linux 3.2.0, with debug_info, not stripped
And now the debugging works even with 5.0.1 however only if the project does not consist of any shared library subprojects (I meam TEMPLATE = subdirs and some shared library and main program witging the project).
Всем привет! Внезапно перестал запускаться проект в QT. MinGW компилирует его и дальше выскакивает вот эта ошибка:
Command Aborted. При этом выполнение проекта не останавливается, но и дальше не идёт, ни один стоп (даже в main) не срабатывает.
Курю это уже 2 дня. Было подозрение на то, что ставил программы и может что-то переписало переменные среды. Полез, там вообще пусто. Дописал. Не помогло. Переустановил QT полностью. Не помогло.
Проект из бэкапа, на другом компе компилируется, так что не в нём дело.
Кто сталкивался?! Хелп ми, а то хана
P.S. системные переменные дописал в Path вот эти (может не все внёс, что нужно?):
1. C:\Qt\5.12.11\mingw73_32\bin
2. C:\Qt\Tools\mingw730_64\bin
P.P.S QT Creator, последний, тока сегодня скаченный. QT 5.12.11, MinGW 7.3 64-bit
Terminate called after throwing an instance of 'int' Aborted -Ошибка, как быть?
Здравствуйте! Выдается такая ошибка, не понимаю почему. terminate called after throwing an.
Idle code blocks ошибка Target uses an invalid compiler; run aborted
idle code blocks помогите ошибка Target uses an invalid compiler; run aborted
При вставке данных в таблицу: Command text was not set for the command object.
Приятного время суток. Помогите пожалуйста разобраться <% Dim tmp tmp = Request('val').
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output
При установке PySide(и 1 и 2) файл сначала скачается, а потом выдаст ошибку ERROR: Command errored.
Может кому поможет:
проблема решена переустановкой Windows (10-ка).
Переустановка просто QT, библиотек, установка системных переменных ни к чему не привели, рабочая неделя потрачена впустую.
Command.Parameters ошибка
Всем привет. Пытаюсь создать параметр для запроса к БД. Почему то не получается в комманд добавить.
OleDbConnection command = new OleDbCommand() ошибка
OleDbConnection command = new OleDbCommand() ошибка пишет неявное приобразования using System;.
Ошибка в триггере Unknown Command
Такой вопрос: я создал триггер, но этот триггер компилируется и выскакивает такая ошибка Trigger.
Ошибка компиляции: G++: Command not found
Привет всем. При компиляции в QT Creator у меня вылетает ошибка: g++: Command not found. Хотя g++ я.
Почему-то вываливается с ошибкой "Программа неожиданно завершилась".
При том иногда один раз обратится даёт, при повторном обращении даже к тому же объекту сваливается.
Запускается ~/build-notice-Desktop_Qt_5_7_1_GCC_64bit-Debug/notice.
4
Программа неожиданно завершилась.
~/build-notice-Desktop_Qt_5_7_1_GCC_64bit-Debug/notice аварийно завершился.
Что я не так делаю?
Приложение Qt Quick: "Программа неожиданно завершилась"
Доброго времени суток. Столкнулся с проблемой при запуске приложения с большим количеством объектов.
Что означает "Программа "[4872] laba!.exe: Машинный код" завершилась с кодом 3 (0x3)."?
при запуске кода компилятор пишет "Программа " laba. exe: Машинный код" завершилась с кодом 3.
программа неожиданно завершилась
Доброго времени суток. Посмотрите пожалуйста опытным взглядом в чем может быть проблема. Насколько.
Программа неожиданно завершилась
До того как собрал .exe в режиме выпуска все было нормально, теперь в режиме отладки все время на.
Chehoff, Твой Notice notice живет только в в цикле (в стеке). Причем после каждого прохода цикла уничтожается. А ты его адрес запоминаешь в векторе. Но этот адрес (указатель) указывает в никуда
Сохраняешь адреса локальных объектов, созданных в теле цикла, которые исчезают при каждой новой итерации.
Добавлено через 38 секунд
Пока писал, уже ответили.
А можно ли в таком случае экземпляр каким-либо образом сохранить? QVector не даёт хранить сами экземпляры, а только указатели на них. Создавать их не в цикле не представляю как.
Решение
Значения, хранящиеся в различных контейнерах, могут быть любого присваиваемого типа данных. Для этого тип должен предоставлять конструктор по умолчанию, конструктор копирования и оператор присваивания. Это охватывает большинство типов данных, которые вы, вероятно, захотите поместить в контейнер, включая базовые типы, такие как int и double, типы указателей и типы данных Qt, такие как QString, QDate и QTime, но не охватывает типы QObject или любые из подклассов QObject (QWidget, QDialog, QTimer, и т.д.). Если вы попытаетесь создать экземпляр QList, компилятор сообщит, что конструктор копирования и операторы присваивания QWidget запрещены. Если вы хотите поместить эти виды объектов в контейнер, то поместите указатели на них, например, так QList тут.
I created a simple console application in Qt. Here is source code of it:
When I use function Debug -> Start Debugging -> Start Debugging from the main menu, application runs and print the message "Hello world" to the console. But debugger ignores breakpoint set on line 6 (as you can see from the above screenshot).
Additional informations: QT Creator version - 2.4.1 QT library version - 4.8.1 (but there is also 4.7.4 installed in separate directory)
Project Build Settings are as follows:
Tool Chain settings in Tools -> Options:
GDB executable is present at directory "E:\QtSDK\pythongdb\python_2.7based" which is underlined by the fact that I have no problem debugging similarly GUI based Hello World program.
Is there something I am doing wrong?
P.S. Here is my compile output:
Here is content of Makefile.debug:
CC = gcc
CXX = g++
DEFINES = -DUNICODE -DQT_LARGEFILE_SUPPORT -DQT_DLL -DQT_CORE_LIB -DQT_HAVE_MMX -DQT_HAVE_3DNOW -DQT_HAVE_SSE -DQT_HAVE_MMXEXT -DQT_HAVE_SSE2 -DQT_THREAD_SUPPORT
CFLAGS = -g -Wall $(DEFINES)
CXXFLAGS = -g -frtti -fexceptions -mthreads -Wall $(DEFINES)
INCPATH = -I". \QtSDK\Desktop\Qt\4.8.1\mingw\include\QtCore" -I". \QtSDK\Desktop\Qt\4.8.1\mingw\include" -I". \QtSDK\Desktop\Qt\4.8.1\mingw\include\ActiveQt" -I"debug" -I"..\PasswordGuess" -I"." -I". \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\win32-g++"
LINK = g++
LFLAGS = -Wl,-subsystem,console -mthreads
LIBS = -L"e:\QtSDK\Desktop\Qt\4.8.1\mingw\lib" -lQtCored4
QMAKE = e:\qtsdk\desktop\qt\4.8.1\mingw\bin\qmake.exe
IDC = e:\QtSDK\Desktop\Qt\4.8.1\mingw\bin\idc.exe
IDL = midl
ZIP = zip -r -9
DEF_FILE =
RES_FILE =
COPY = copy /y
SED =
COPY_FILE = $(COPY)
COPY_DIR = xcopy /s /q /y /i
DEL_FILE = del
DEL_DIR = rmdir
MOVE = move
CHK_DIR_EXISTS= if not exist
MKDIR = mkdir
INSTALL_FILE = $(COPY_FILE)
INSTALL_PROGRAM = $(COPY_FILE)
INSTALL_DIR = $(COPY_DIR)
.SUFFIXES: .cpp .cc .cxx .c
.cpp.o:
$(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $
.cc.o:
$(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $
.cxx.o:
$(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $
first: all
all: Makefile.Debug $(DESTDIR_TARGET)
$(DESTDIR_TARGET): $(OBJECTS)
$(LINK) $(LFLAGS) -o $(DESTDIR_TARGET) $(OBJECTS) $(LIBS)
qmake: FORCE
@$(QMAKE) -spec . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\win32-g++ CONFIG+=declarative_debug -o Makefile.Debug ..\PasswordGuess\PasswordGuess.pro
dist:
$(ZIP) PasswordGuess.zip $(SOURCES) $(DIST) ..\PasswordGuess\PasswordGuess.pro . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\qconfig.pri . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\modules\qt_webkit_version.pri . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\qt_functions.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\qt_config.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\exclusive_builds.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\default_pre.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\win32\default_pre.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\debug.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\debug_and_release.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\default_post.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\win32\default_post.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\build_pass.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\win32\console.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\declarative_debug.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\win32\rtti.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\win32\exceptions.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\win32\stl.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\shared.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\warn_on.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\qt.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\win32\thread.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\moc.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\resources.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\uic.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\yacc.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\lex.prf . \QtSDK\Desktop\Qt\4.8.1\mingw\mkspecs\features\include_source_dir.prf HEADERS RESOURCES IMAGES SOURCES OBJECTIVE_SOURCES FORMS YACCSOURCES YACCSOURCES LEXSOURCES
clean: compiler_clean
-$(DEL_FILE) debug\main.o
distclean: clean
-$(DEL_FILE) $(DESTDIR_TARGET)
-$(DEL_FILE) Makefile.Debug
mocclean: compiler_moc_header_clean compiler_moc_source_clean
mocables: compiler_moc_header_make_all compiler_moc_source_make_all
compiler_moc_header_make_all:
compiler_moc_header_clean:
compiler_rcc_make_all:
compiler_rcc_clean:
compiler_image_collection_make_all: qmake_image_collection.cpp
compiler_image_collection_clean:
-$(DEL_FILE) qmake_image_collection.cpp
compiler_moc_source_make_all:
compiler_moc_source_clean:
compiler_uic_make_all:
compiler_uic_clean:
compiler_yacc_decl_make_all:
compiler_yacc_decl_clean:
compiler_yacc_impl_make_all:
compiler_yacc_impl_clean:
compiler_lex_make_all:
compiler_lex_clean:
compiler_clean:
debug/main.o: ../PasswordGuess/main.cpp
$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\main.o ..\PasswordGuess\main.cpp
This section lists some typical problems that you might encounter while debugging and solutions to them.
Cannot Launch Debugger
Some anti-virus applications do not allow debuggers to retrieve data. For example, on Windows, launching the debugger might fail with the following message if the Avira AntiVir is installed on the development PC: The inferior stopped because it received a signal from the operating system. Signal name:? signal meaning: Unknown signal.
Some versions of Avira AntiVir Desktop-Products contain known issues in various development environments, including Qt Creator. To fix the problem, Avira instructs you to update to version avipbb.sys 10.0.22.22 . For more information, see Restricted Usability of IDE/Debuggers since 2010-12-08.
On some devices, such as Wacom Tablets, running processes might stop the debugger from launching. Stop all running processes and then relaunch the debugger.
Debugger Does Not Hit Breakpoints
You might have created a release build that does not contain debug information. A GNU Compiler Collection (GCC) debug build has the -g option on the compiler command line. Check that this option is present in the Compile Output pane. If it is not, adjust your build settings in the Projects mode.
Debugger Does Not Work
If the debugger does not work properly, try the following:
Pointer Variable Members Are Not Displayed Directly
When you use the Locals and Expressions views to inspect a pointer variable and expand the variable tree item, another tree item level is displayed. To directly display the members of the pointer variable, select Dereference Pointers Automatically in the context menu in the Locals and Expressions views.
Structure Members Are Not Sorted According to Structure Layout
By default, structure members are displayed in alphabetic order. To inspect the real layout in memory, deselect Sort Members of Classes and Structs Alphabetically in the context menu in the Locals and Expressions views.
Built-in Debugger Is Slow During Startup and Runtime
Slowness that is related to the loading of debug information is hard to avoid.
When using GDB as backend, you can automatically save a copy of its symbol index in a cache on disk and retrieve it from there when loading the same binary in the future. Select Tools > Options > Debugger > GDB > Use automatic symbol cache.
Some slowness stems from maintaining breakpoints inside the debugger (under some circumstances all breakpoints need to be inserted and removed again for each step) and the evaluation of expressions after each step. We recommend that you minimize the number of breakpoints and watched expressions.
Debugger Cannot Attach to Running Process on Linux
GDB uses ptrace to attach to running processes. Some Linux distributions do not allow this, which stops all attempts to either directly attach to an existing process or use the Run in terminal option in Qt Creator.
The reasons for this are described in KernelHardening.
However, the usefulness of this security measure seems dubious, because this feature can be easily disabled. With root permissions, you can disable the feature temporarily by writing 0 into /proc/sys/kernel/yama/ptrace_scope or permanently by changing the value in /etc/sysctl.d/10-ptrace.conf . Even if you do not have elevated permissions, you can disable the feature later by adding a library that calls prctl(0x59616d61, getppid(), 0, 0, 0); , such as the one in $QTCREATORDIR/lib/libptracepreload.so to the LD_PRELOAD environment.
© 2022 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.
Читайте также: