Программа для дуалшок 4 на виндовс 10
DS4Windows – это утилита для геймеров, которая позволяет использовать геймпад (Controller) от Sony PlayStation DualShock 4 на компьютере. Она работает по принципу эмулирования контроллера, как беспроводного устройства от Xbox 360. Для начала нужно установить системные драйвера на геймпады от Сони ps4 и ИксБокс и перезагрузить компьютер. Как и другие программы софт не просто эмулирует, а маскирует контроллер под другое устройство.
Особенности
DS4Windows позволяет настраивать различные параметры (settings), к которым можно отнести мертвые зоны, чувствительность стика, подсветку, её цвет и индикатор, назначение кнопок и так далее. Также можно использовать сенсорную панель на контроллере в качестве тачпада. Для того, чтобы в разных играх были разные конфигурации клавиш можно создать отдельные профили. Так как приложение джойстик от ИксБокс 360, поэтому на экране будут отражаться кнопки именно от этой консоли.
Программа отличается простым и понятным интерфейсом, а также поможет быстро настроить контроллер и начать игру. Она включает в себя комплект инструментов для настройки геймпада от разных приставок. ПО скачивается в виде архивного файла и его можно распаковать в любую новую папку, в том числе и на рабочем столе.
Двойное подключение
Утилита позволяет подключить свой контроллер с помощью Bluetooth или с помощью USB-кабеля. Функции прекрасно работают на ОС Windows 8 и 10.
Ключи
Эмулятор автоматически устанавливает ключи при первом запуске игрового приложения. Если ключ все же работает неправильно, то его можно ввести в ручном режиме.
Сенсорная панель DS4Windows
Программа дает возможность использовать сенсорную панель для смены настройки чувствительности, передвинуть игрового персонажа. Мышь для этого не понадобится.
Профили
Для каждой игры, в которую пользователь будет играть, можно настроить свой профиль настроек. Переключение между профилями может осуществляться автоматически в зависимости от игры, в которую хочет сыграть пользователь. Все настройки для каждого профиль сохраняются отдельно.
Обновление
Приложение поддерживает автоматическое скачивание обновлений (ds4updater). Оно само загружает их на компьютер, позволяя пользователю наслаждаться стабильной версией.
Дополнительно
DS4 Tool находится в открытом бесплатном доступе без подписки. Она проста в использовании, но не поддерживает русский язык интерфейса. Если нужные драйвера не загружены, то установка может пойти не так, как нужно. Программное обеспечение отличается простой загрузкой и инсталляцией, а также качественной эмуляцией джойстика. Софт отлично функционирует на пк и ноутбуке и осуществляет поддержку операционной системы Windows, а также осуществляет маскировку одного устройства под другое. В нем можно настроить беспроводное соединение без сети для удобного управления устройством.
Here we will go through the installation steps, whats required for the application and how to download and setup DS4Windows correctly.
What is DS4Windows?
For those that are still not sure what DS4windows is or why they need this application. See our about us page and FAQ for more information.
In summary, DS4 Windows makes it possible for your to use your PlayStation and Nintendo controllers on a Windows 10 PC by emulating a virtual Xbox/DS4 controller. With it, comes added features where you can remap or rebind the keys to your liking (buttons, joysticks, keyboard + mouse etc) and making it possible to play much more games with your controller. No need to buy a supported controller or forcefully play only with keyboard and mouse. Go ahead, take control!
Important Steps to use DS4 correctly
- Downloading, running and getting your gamepads detected by DS4Windows
- Installation and Setup guide
- This is THE major recomendation to be followed in order to prevent problems in games for more info about the issue and instructions on how to proceed
Important Notes
About the default Profile
- Xbox 360 emulation is the default mode: your gamepad will be recognized as if it were an Xbox 360 controller by the system and games
- DS4/DualSense’s touchpad is set for mouse control
- To quickly turn off or on this feature you can hold the PS button then touch the Touchpad once
About DS4 Controller emulation
- Though it’s possible to change from Xbox to DS4 emulation, keep in mind that most games support only Xbox gamepads! If the game itself doesn’t have native support for DS4 controllers then your gamepad won’t be detected if you switch to DS4 emulation
- To switch to DS4 emulation you can create a new profile using a Gamepad -> DualShock 4 preset or edit an existing profile and then change the Virtual controller settings in the profile editor’s Other tab
- Do not confuse things: using a real DS4 while doing Xbox emulation will have rumble working as normal. Using any real controller + DS4 emulation will have rumble disabled
About the output slots tab (Latest DS4 version)
It’s better that nothing is changed on this tab unless you really know what you are doing. The default configurations (everything set to dynamic) is the better choice for most users.
Download, Install & Setup DS4Windows
Prerequisites
Downloading and starting DS4Windows
- Download the latest DS4Windows x64 package
- The .7zip package is smaller but requires the 7zip software in order to open/extract it
- DO NOT extract it inside a folder the requires elevated privilegies (e.g.: Program Files, Windows)
- AppData folder (recommended): user data is stored outside of the program folder, inside a special folder reserved to your Windows user
- Program folder: user data is stored inside the same folder DS4Windows.exe is located
Drivers Setup
When running DS4Windows for the first time it may prompt you to install some drivers, with the first one being essential. Install them accordingly to your needs then hit the Finished button after.
Driver Recommended? Driver function ViGEmBUS REQUIRED Allows DS4Windows to create virtual Xbox/DS4 controllers HidHide Strongly recommended Used to “hide” your real controller in order to prevent games from simultaneously recognizing both your real controller and the virtual controller created by DS4Windows, a situation that can lead to the infamous double controller input issue FakerInput Optional Useful for users who want to use their controllers as keyboard and mouse. Though DS4Windows can do so by itself, the FakerInput has better performance and can work in more games and situations where Windows might prevent the usage ofDS4Windows’ normal keyboard/mouse handler Final steps
- If your controller is not connected yet, do so now
- Check here if you are having trouble connecting them via bluetooth
- Make sure DS4Windows is not stopped
- Check here if DS4Windows has not detected your controller
Assuming your controller has been detected then Xbox Controller emulation should already be working and you are all set. Good Luck and Have Fun!
About the X If the "X" check is present, then you may suffer from the infamous Double Input Issue which might cause several gameplay problems. Read more about how to fix it below. × Dismiss alert
Connecting controllers to the PC and DS4Windows
DS4Windows should immediatly recognize any controllers properly connected to the PC.
Though USB cables are the most reliable, connecting controller wirelessly via Bluetooth will offer similar response times (input delay) and stable connections as long as a good quality BT adapter is being used and no major radio interference is affecting the connection.
Connection methods
- Should be as simple as just plugging your controller with a good, working USB cable
- Windows should play a “device has been detected” sound when the controller is plugged in
- Keep in mind that some USB cables can only be used for charging. If the cable does not support data transfer then it won’t be of use
Bluetooth
- Make sure your BT adapter has the minimum specs for your controller
- The controller needs to be set into pairing mode to be added as a Bluetooth device through Windows’ settings. If a pin is asked try 0000
- If a controller has already been previously paired and you can’t reconnect, try removing the device from Windows’ Bluetooth devices list and repairing them
Setting Controller in pairing mode
Hold at the same time the PS + Share buttons until the lightbar starts flashing in a heartbeat pattern.
Hold down the sync button until the controller LEDs enter a back n’ forth pattern.
- Probably the same as the official ones
- If facing trouble, check the controller’s manual
Sony DualShock 4 USB Wireless adapter
The official adapter from Sony supports only 1 controller, but allows the headphone jack to be used wireless for both audio and mic.
To pair a DualShock 4 to it, both must be set to pairing mode. For the Wireless Adapter, its main body must be slightly pressed towards the USB port (until a “click” is felt) then hold it down in this position for 3 seconds, with its LED flashing in a heartbeat pattern indicating that it’s in pairing mode. Set then DualShock 4 into pairing mode (check the previous section) and it it should connect to the adapter.
Final Checks
Assuming everything is working as expected then DS4Windows should have no trouble detecting your controller, just make sure you haven’t accidentally stopped DS4Windows (in case you have, just press DS4Windows’ start button)
If for whatever reason DS4Windows is failing to detect your controller or you are not sure if it has been properly connected, check the Controller Detection troubleshoot page.
DS4Windows is an open-source gamepad input mapper and virtual emulator designed to use and connect your PlayStation controller (DualShock 3/4 and DualSense 5) to a Windows 10 & 11 PC.
Get the best gaming experience with state of the art features, gamepad customization and less input latency on a PS3/PS4/PS5 Controller.
Why DS4Windows?
Due to Sony’s PlayStation controllers like the DualShock4 not supporting Windows natively (by that we mean you can try plugging it in via USB or Bluetooth and it won’t be detected, sucks right?). Well, this is where an awesome tool called DS4windows comes handy and emulates a Xbox controller and tricks the computer into thinking the DS4, is in fact, an Xbox game pad (virtual emulation occurs).
Connect DS4 Controller
DS4 Windows supports any PlayStation controller, from DualShock 3, 4 and PS5 DualSense to Nintendo Switch Pro, Joycons and even "fake" DS4 replica's.
KB+Mouse/Joystick Mapper
Not only can you map the controller to any game, but you can also modify it as your keyboard + mouse. Macros integration & motion sensor emulation.
Supports Most Games
With various games added and tested to make sure DS4 Windows works with all the latest and greatest games.
Profile System
DS4Windows comes with an automatic profiling system that you can configure for each specific game or controller.
Free Application
DS4 Windows is an opensource application which means its free and maintained by Ryochan7/Community
Helpful Community
Over the last few years, a thriving community has built up around DS4Win with continuous support & updates.
Not only is DS4win able to emulate and connect your controller to Windows, but you are also able to remap and rebind your keys/buttons to anything you want (including keyboard, mouse, joysticks, lightbar, rumble/vibration and motion sensors, also known as gyro).
DS4 is the best free game pad input mapper, virtual emulator and customizer available. Giving you the power to take control!
DS4 Screenshots
Features and Requirements
Choosing DS4Windows will give you the best gaming experience with less input lag and latency issues compared to other paid apps. In addition to added customization options, now you can always play with a controller and bypass game limitations!
DS4Windows works by remapping the user’s “real” gamepad into a new, virtual / “fake” / emulated gamepad or by directly mapping the real gamepad to the user’s keyboard and mouse. This allows:
For DS4/DS5 to properly function on your Windows 10 PC you are required to install necessary first and third party drivers. Some of which, of course, are optional but will improve DS4windows capabilities. Here we will list and give a description of every driver needed to allow your DualShock 4 and DualSense 5 to work. Launching the DS4 app will also ask to install the drivers.
DS4 Drivers
1. Virtual Gamepad Emulation Bus - ViGEmBus (Required)
The ViGEmBus driver is the most important driver used by DS4Windows. It can create virtual/fake/emulated controllers, which DS4Windows uses to spawn virtual Xbox and DS4 controllers.
2. HidHide (Optional)
The HidHide driver allows the user to “hide” gamepads from the system and make them detectable to only chosen programs in order to prevent the infamous double input issue.
3. FakerInput (Optional)
DS4Windows uses the FakerInput driver to expose system-wide virtual keyboard, relative mouse and absolute mouse. Allows Keyboard + Mouses events/commands to be usable in some situations where the usual way DS4Windows sends those commands (via “SendInput) fails. Examples of those situations are elevated processes and games, UAC prompts and anti-cheat systems that block SentInput events. Use of FakerInput is necessary to allow DS4Windows to work with some games with anti-cheat protection like valorant.
4. Windows Libraries & Frameworks (Required)
5. DS4Windows Application (Required)
After installing the above prerequisite drivers, you can run and launch the DS4Windows program. Download the official DS4 App.
Legacy Controller Drivers
The following “old” ds4 driver are no longer required to install and only listed for documenting and usage purposes.
HidGuardian
HidGuardian is a driver that can hide controllers from the system and allow only chosen processes to detect them. It was previously used by DS4Windows to solve the double input issue, but was made obsolete by the release of its successor, HidHide, a similar driver that works better and is easier to use.
DS4Windows removed support for HidGuardian in version 3.0.8 in favor of HidHide. As such, users who used and still have HidGuardian installed can be in a state where their controllers are hidden and undetectable to Windows and DS4Windows.
Virtual Gamepad Emulation Bus (ScpVBus)
The ScpVBus driver is used to create fake/virtual/emulated Xbox 360 controllers. It was made obsolete by the release of its successor, the ViGEmBus driver.
Usually, users accidentally install this driver when they search for “DS4Windows” on google and end-up clicking on the first result that appears, which leads to the original (but now obsolete) version of DS4Windows from the developer Jays2kings which prompts the user to install it.
ScpVBus is not used anymore by Ryochan7’s DS4Windows besides for experimenting purposes on special testing builds. Therefore, this driver has no use for the average user and it’s better if it were to be uninstalled in case it’s present since it has a minor chance of causing issues/BSoD on Windows.
Первый способ обеспечивает более качественное соединение, так как подключение по Блютуз, как правило, сопровождается потерей сигнала и задержкой ввода. У Sony есть USB-адаптер для подключения Dualshock 4, который должен устранять эти проблемы, но стоит он дороже обычных Bluetooth-адаптеров, а в последнее время его сложно найти в продаже.
Этап 2: Настройка в Steam
После подключения устройство можно использовать в большинстве игр без установки эмуляторов и дополнительных драйверов, но только если играть в Steam. Уже несколько лет платформа официально поддерживает Дуалшок 4. Главное, чтобы он был включен в настройках клиента.
- Открываем Steam, переходим во вкладку «Вид» и выбираем «Режим Big Picture», разработанный для того, чтобы удобнее было запускать платформу на телевизорах и управлять ею с помощью геймпада.
Стим распознает не только оригинальные контроллеры от PS4, но и некоторые их копии при условии, что они нормально работают на самой консоли.
Этап 3: Установка дополнительных драйверов
Если игра не связана с платформой Steam, например, приобретена и установлена в другом сервисе, придется скачать дополнительное ПО. Таких программ несколько, но принцип их работы мало чем отличается. Рассмотрим настройку Dualshock 4 в Windows 10 на примере приложения DS4Windows.
-
Заходим на официальную страницу ПО и нажимаем «Download now».
Теперь Dualshock 4 готов для работы на компьютере с Windows 10. Программу DS4Windows нужно будет запускать каждый раз, когда необходимо воспользоваться геймпадом.
Мы рады, что смогли помочь Вам в решении проблемы.
Отблагодарите автора, поделитесь статьей в социальных сетях.
Опишите, что у вас не получилось. Наши специалисты постараются ответить максимально быстро.
Читайте также: