Опция wpolygon команды select в автокад позволяет
Извините, что создал может быть ламерский вопрос, но действительно очень нужно узнать. Проблема стоит в том, что я бы хотел узнать как можно сделать выбор в автокаде такой же как в арчикаде. Т. е. Чтобы после завершения команды выбор выделенных объектов оставался. И еще как можно вернуть выбор объектов, т. е. после неудачной команды возвратить выбор, а не заново все выделять
Извините, но что-то у меня не получается. А на русском в панелях инструментов никак нельзя это сделать? Без ввода команд в командной строке.
А на русском в панелях инструментов никак нельзя это сделать? |
Можно создать кнопку и повесить ее на панели инструментов. Код макроса для кнопки будет выглядеть так
Как создавать кнопки с макросами, посмотрите в Cправке AutoCAD в разделе Адаптация или в статье Владимира Света Примеры создания своих команд и меню в AutoCAD
Да команда не срабатывает. Ничего себе вы загнули. )) Я просто черчу в Акаде, но такого никогда не делал. Значит без собственного рукоприкладства не обойтись? Жаль, что сразу никак не настроить, например поставив где нить какую нить галочку))
SPAM, это так кажется, с непривычки.
На виде (например) выбрал что-то _select (в русской версии через _) и ткнул что-то. Пунктир появился. Сменил вид или ПСК. Пунктир пропал. В КС опять набрал _Select, но на призыв выбрать ответить _p. И всё-ё.
А кнопка хороша, чтобы многорукое прикладство было один раз.
Вроде так.
SPAM, ничего я не загнул. Я вообще не черчу в AutoCAD, грубо говоря, я в нем рисую геологические разрезы. Хотя, конечно, по-научному, можно и сказать "выполняю построение разрезов", но сути дела это не поменяет.
На счет команды: Вы сначала на клавиатуре просто набираете _SELECT или по-русски ВЫБРАТЬ (как правило, это сразу попадает в командную строку, так что даже мышкой курсор обозначать в ком.строке не надо), нажимаете Enter и далее набираете _PREVIOUS или по-русски ТЕКУЩИЙ и нажимаете еще один раз Enter. По идее, все должно сработать!
А зачем набирать "_select" ("выбрать") ? Ну, подсветились объекты текущего набора, но мы нажали Enter и подсветка исчезла.
Люди, видимо, не работали с ArchiCAD'ом (или, например, с CorelDRAW). Там выбрали объекты, они выделились, далее мы, к примеру, переместили объекты, но они остались выделенными. В AutoCAD'е же, после выполнения команды, например, "Переместить", выделение снимается. Поэтому в AutoCAD'е для выполнения команды редактирования с текущим набором не надо сначала вводить команду "Выбрать", потому что опции этой команды включены практически во все команды редактирования. Достаточно ввести ту же команду "Переместить" или нажать соответствующую кнопку и в командной строке ввести опцию "т" ("_p").
Profan, если твое недоумение в мой "огород", то поясню не для тебя, естественно, что после Ентера подсветка исчезает, но _р без повторного _select не "пашет" в 2005. В 200? не проверял. Важен ведь принцип "Выбрать и Предыдущий". А человек-то узнает, что не птичкой- галочкой это решается, но командой. Я сам недавно об этом узнал, ничего удивительного.
Во, как! Разница в постах = 0 секунд и мне теперь придется зачеркивать всё в этих моих двух постах (в 6-ом и половине 9-го). Это класс, после Переместить указать ЛИШЬ _р. Проверено, "мин нет".
Ух ты сколько людей подключилось. Очень признателен за помощь, щас буду пробовать.
Попробовал, все равно не так как в Архикаде. ПОлучается после этого я могу только совершать те команды которые выполнял до этого? Жаль((
Почему я не могу совершать любые другие, а после этого нажать ESC и снять выделние. По моему так гораздо удобнее))
Все там пашет, в 2005-ом.
В принципе, без "_select" не обойтись, потому что любая программа редактирования начинается с предложения выбора объектов. Другое дело - что саму команду "_select" вводить не надо, вот в чем дело. Ввели сразу опцию "_p", нажали Enter для завершения выбора и далее уже выполняем запросы команды редактирования.
При редактировании объекта или группы объектов AutoCAD позволяет:
вначале выбрать объект, а затем ввести команду работы с ним (режим предварительного выбора)
вначале ввести команду, а затем выбрать объект
Самый простой способ выбора объектов – последовательно устанавливать прицел в центре перекрестия на изображении объектов и щелкать левой кнопкой мыши. Кроме последовательного выбора объектов AutoCAD 2000i предлагает множество способов выбора объектов, обеспечивая создание т. н. набора объектов.
Если вызывается какая-либо команда редактирования до указания объекта редактирования, то AutoCAD 2000i выведет приглашение Select objects :. После указания объекта, приглашение будет повторяться до тех пор, пока пользователь не укажет все объекты, подлежащие редактированию по введенной команде. Если все запланированные объекты для модификации будут выбраны, то следует щелкнуть правой кнопкой мыши в ответ на очередное приглашение.
Команда SELECT OBJECTS имеет следующие опции:
Window – определение набора объектов с помощью рамки выбора. Обеспечивается выбор всех объектов, полностью находящихся в прямоугольном поле выбора. Задается указанием координат первого и второго угла в командной строке или динамической рамкой движением слева направо
Last – выбор последнего созданного объекта. Для редактирования отбирается последний объект, вычерченный перед обращением к функции отбора объектов
Crossing – определение набора объектов с помощью секущей рамки. В этом случае набор создается из объектов полностью или частично попавших в область, ограниченную рамкой выбора
Box – – комбинация двух фильтров Window и Crossing , т. е. создание набора или с помощью рамки выбора, или с помощью секущей рамки. При определении рамки слева направо включается опция Window , при определении рамки справа налево включается опция Crossing
All – создание набора из всех объектов чертежа, включая расположенные на замороженных слоях
Fence – создание набора с помощью ломаной линии выбора, т. е. незамкнутого многоугольника. AutoCAD 2000i включает в набор любые объекты, которые пересекла ломаная линия
Wpolygon – создание рамки выбора в виде правильного многоугольника. Аналогичен опции Window
Cpolygon — создание секущей рамки выбора в виде правильного многоугольника. Аналогичен опции Crossing
Group – создание набора объектов из поименованной группы объектов. Группа объектов должна быть создана по команде GROUP , вводимой в командную строку
Add – добавление объектов в набор после выполнения опции Remove
Remove – опция отмены выбора объектов. После задания опции объекты, входящие в набор становятся невыбранными, т. е. они будут удалены из набора.
Multiple – опция отключения визуализации выделения объектов при их включении в набор. Данный фильтр позволяет увеличить скорость выбора большого числа объектов, но при этом пользователь не имеет возможности визуально наблюдать результаты процесса выбора
Previous – восстанавливает статус выбора объектов, выполненного для предыдущей команды. Этот фильтр позволяет производить несколько операций редактирования с одним и тем же набором объектов
Undo – отмена создания набора объектов, созданного в ответ на последнее приглашение select objects
Auto – опция создания набора объектов комбинированным способом – непосредственного указания и выбором по опции Box
Single – предоставление пользователю возможности создания набора с помощью любой опции. После этого AutoCAD 2000i заканчивает процесс выбора
В процессе редактирования чертежа случаются ситуации, когда изображения большое количество объектов расположены очень плотно и/или накладываются друг на друга, и отделить их при создании набора очень трудно. Для облегчения выбора объектов используется последовательный (циклический) просмотр объектов. Для организации последовательного просмотра объектов в ответ на приглашение AutoCAD 2000i Select object следует, при нажатой клавише CTRL , указать на область, в которой содержится несколько наложенных друг на друга объектов, если это не тот что требуется, то следует снова указать на эту область при нажатой клавише CTRL . Когда выделится интересующий пользователя объектов, необходимо клавишу CTRL отпустить и нажать клавишу ENTER . Затем можно продолжить создание набора выбора объектов или закончить этот процесс.
AutoCAD 2016, AutoCAD Architecture 2016, AutoCAD Civil 3D 2016, AutoCAD Electrical 2016, AutoCAD MEP 2016, AutoCAD Map 3D 2016, AutoCAD Mechanical 2016, AutoCAD P&ID 2016, AutoCAD Plant 3D 2016, AutoCAD Structural Detailing 2016, & AutoCAD Utility Design 2016
By:
Places selected objects in the Previous selection set.
A small box, called the object selection target or pickbox, replaces the crosshairs on the graphics cursor.
At the Select Objects prompt in a subsequent command, use the Previous option to retrieve the previous selection set.
For products that support 3D solid modeling, you can also press and hold the Ctrl key to select original individual forms that are part of composite solids or vertices, edges, and faces on 3D solids. You can select one of these subobjects, or create a selection set of more than one subobject. Your selection set can include more than one type of subobject. Subobject selection is not available in AutoCAD LT.
To view all options, enter ? at the Command prompt.
The following prompts are displayed.
Select objects Selects the objects that you click. Window
Selects all objects completely inside a rectangle defined by two points. Specifying the corners from left to right creates a window selection. (Specifying the corners from right to left creates a crossing selection.)
Selects the most recently created visible object. The object must be in the current space, that is, model space or paper space, and its layer must not be set to frozen or off.
Selects objects within and crossing an area defined by two points. A crossing selection is displayed as dashed or otherwise highlighted to differentiate it from window selection.
Selects all objects inside or crossing a rectangle specified by two points. If the rectangle's points are specified from right to left, Box is equivalent to Crossing. Otherwise, Box is equivalent to Window.
Selects all objects in either model space or the current layout, except those objects on frozen or on locked layers.
Selects all objects crossing a selection fence. The Fence method is similar to CPolygon except that that the fence is not closed, and a fence can cross itself. Fence is not affected by the PICKADD system variable.
Selects objects completely inside a polygon defined by points. The polygon can be any shape but cannot cross or touch itself. The last segment of the polygon is drawn so that it is closed at all times. WPolygon is not affected by the PICKADD system variable.
Selects objects within and crossing a polygon defined by specifying points. The polygon can be any shape but cannot cross or touch itself. The last segment of the polygon is drawn so that it is closed at all times. CPolygon is not affected by the PICKADD system variable.
Selects all objects within one or more named or unnamed groups. When you specify an unnamed group, be sure to include the asterisk (*). For example, enter *a3. You can use the LIST command to display the names of groups.
Switches to the Add method: selected objects can be added to the selection set by using any of the object selection methods. Auto and Add are the default methods.
Switches to the Remove method: objects can be removed from the current selection set using any object selection method. An alternative to Remove mode is to hold down Shift while selecting single objects or use the Automatic option.
Selects objects individually without highlighting them during object selection. This speeds up object selection for highly complex objects.
Selects the most recent selection set. The Previous selection set is cleared by operations that delete objects from the drawing.
Cancels the selection of the object most recently added to the selection set.
Switches to automatic selection: pointing to an object selects the object. Pointing to a blank area inside or outside an object forms the first corner of a box defined by the Box method. Auto and Add are the default methods.
Switches to the Single method: selects the first object or set of objects designated rather than continuing to prompt for further selections.
Subobject (not available in AutoCAD LT)
Allows you to select original individual forms that are part of composite solids or vertices, edges, and faces on 3D solids. You can select one of these subobjects, or create a selection set of more than one subobject. Your selection set can include more than one type of subobject.
Pressing and holding the Ctrl key is the same as selecting the SELECT command’s Subobject option.
Ends the ability to select subobjects. Allows you to use object selection methods.
Places selected objects in the Previous selection set.
Select objects: Use an object selection method
A small box, called the object selection target or pickbox, replaces the crosshairs on the graphics cursor.
Objects that are selected with this command can be automatically reselected in a subsequent command. At the Select Objects prompt in a subsequent command, use the Previous option to retrieve the previous selection set.
You can select objects individually with the pointing device, by drawing a selection window around them, by entering coordinates, or by using one of the selection methods listed below. These methods can be used to select objects regardless of the command that initiated the Select Objects prompt.
You can also press and hold the Ctrl key to select original individual forms that are part of composite solids or vertices, edges, and faces on 3D solids. You can select one of these subobjects, or create a selection set of more than one subobject. Your selection set can include more than one type of subobject.
To view all options, enter ? at the Command prompt.
Expects a point or
Select objects: Specify a point or enter an option
Selects all objects completely inside a rectangle defined by two points. Specifying the corners from left to right creates a window selection. (Specifying the corners from right to left creates a crossing selection.)
Specify first corner: Specify a point (1)
Specify opposite corner: Specify a point (2)
Selects the most recently created visible object. The object must be in the current space, that is, model space or paper space, and its layer must not be set to frozen or off.
Selects objects within and crossing an area defined by two points. A crossing selection is displayed as dashed or otherwise highlighted to differentiate it from window selection. Specifying the corners from right to left creates a crossing selection. (Specifying the corners from left to right creates a window selection.)
First corner: Specify a point (1)
Other corner: Specify a point (2)
Selects all objects inside or crossing a rectangle specified by two points. If the rectangle's points are specified from right to left, Box is equivalent to Crossing. Otherwise, Box is equivalent to Window.
Specify first corner: Specify a point
Specify opposite corner: Specify a point
Selects all objects in either model space or the current layout, except those objects on frozen or on locked layers.
Selects all objects crossing a selection fence. The Fence method is similar to CPolygon except that that the fence is not closed, and a fence can cross itself. Fence is not affected by the PICKADD system variable.
First fence point: Specify a point
Specify endpoint of line or [Undo]: Specify a point or enter u to undo the last point
Selects objects completely inside a polygon defined by points. The polygon can be any shape but cannot cross or touch itself. The last segment of the polygon is drawn so that it is closed at all times. WPolygon is not affected by the PICKADD system variable.
First polygon point: Specify a point
Specify endpoint of line or [Undo]: Specify a point or enter u to undo the last point
Selects objects within and crossing a polygon defined by specifying points. The polygon can be any shape but cannot cross or touch itself. The last segment of the polygon is drawn so that it is closed at all times. CPolygon is not affected by the PICKADD system variable.
First polygon point: Specify a point
Specify endpoint of line or [Undo]: Specify a point or enter u to undo the last point
Selects all objects within a specified group.
Enter group name: Enter a name list
Switches to the Add method: selected objects can be added to the selection set by using any of the object selection methods. Auto and Add are the default methods.
Switches to the Remove method: objects can be removed from the current selection set using any object selection method. An alternative to Remove mode is to hold down SHIFT while selecting single objects or use the Automatic option.
Specifies multiple points without highlighting the objects, thus speeding up the selection process for complex objects. The Multiple method also selects two intersecting objects if the intersection point is specified twice.
Selects the most recent selection set. The Previous selection set is cleared by operations that delete objects from the drawing.
The program keeps track of whether each selection set was specified in model space or paper space. The Previous selection set is ignored if you switch spaces.
Cancels the selection of the object most recently added to the selection set.
Switches to automatic selection: pointing to an object selects the object. Pointing to a blank area inside or outside an object forms the first corner of a box defined by the Box method. Auto and Add are the default methods.
Switches to the Single method: selects the first object or set of objects designated rather than continuing to prompt for further selections.
Allows you to select original individual forms that are part of composite solids or vertices, edges, and faces on 3D solids. You can select one of these subobjects, or create a selection set of more than one subobject. Your selection set can include more than one type of subobject.
Select objects: Select original individual forms that are part of composite solids or vertices, edges, and faces
Pressing and holding the Ctrl key is the same as selecting the SELECT command’s Subobject option.
Ends the ability to select subobjects. Allows you to use object selection methods.
AutoCAD 2015, AutoCAD Architecture 2015, AutoCAD Civil 3D 2015, AutoCAD Electrical 2015, AutoCAD MEP 2015, AutoCAD Map 3D 2015, AutoCAD Mechanical 2015, AutoCAD P&ID 2015, AutoCAD Plant 3D 2015, AutoCAD Structural Detailing 2015, & AutoCAD Utility Design 2015
By:
Places selected objects in the Previous selection set.
A small box, called the object selection target or pickbox, replaces the crosshairs on the graphics cursor.
At the Select Objects prompt in a subsequent command, use the Previous option to retrieve the previous selection set.
For products that support 3D solid modeling, you can also press and hold the Ctrl key to select original individual forms that are part of composite solids or vertices, edges, and faces on 3D solids. You can select one of these subobjects, or create a selection set of more than one subobject. Your selection set can include more than one type of subobject. Subobject selection is not available in AutoCAD LT.
To view all options, enter ? at the Command prompt.
The following prompts are displayed.
Select objects Selects the objects that you click. Window
Selects all objects completely inside a rectangle defined by two points. Specifying the corners from left to right creates a window selection. (Specifying the corners from right to left creates a crossing selection.)
Selects the most recently created visible object. The object must be in the current space, that is, model space or paper space, and its layer must not be set to frozen or off.
Selects objects within and crossing an area defined by two points. A crossing selection is displayed as dashed or otherwise highlighted to differentiate it from window selection.
Selects all objects inside or crossing a rectangle specified by two points. If the rectangle's points are specified from right to left, Box is equivalent to Crossing. Otherwise, Box is equivalent to Window.
Selects all objects in either model space or the current layout, except those objects on frozen or on locked layers.
Selects all objects crossing a selection fence. The Fence method is similar to CPolygon except that that the fence is not closed, and a fence can cross itself. Fence is not affected by the PICKADD system variable.
Selects objects completely inside a polygon defined by points. The polygon can be any shape but cannot cross or touch itself. The last segment of the polygon is drawn so that it is closed at all times. WPolygon is not affected by the PICKADD system variable.
Selects objects within and crossing a polygon defined by specifying points. The polygon can be any shape but cannot cross or touch itself. The last segment of the polygon is drawn so that it is closed at all times. CPolygon is not affected by the PICKADD system variable.
Selects all objects within one or more named or unnamed groups. When you specify an unnamed group, be sure to include the asterisk (*). For example, enter *a3. You can use the LIST command to display the names of groups.
Switches to the Add method: selected objects can be added to the selection set by using any of the object selection methods. Auto and Add are the default methods.
Switches to the Remove method: objects can be removed from the current selection set using any object selection method. An alternative to Remove mode is to hold down Shift while selecting single objects or use the Automatic option.
Selects objects individually without highlighting them during object selection. This speeds up object selection for highly complex objects.
Selects the most recent selection set. The Previous selection set is cleared by operations that delete objects from the drawing.
Cancels the selection of the object most recently added to the selection set.
Switches to automatic selection: pointing to an object selects the object. Pointing to a blank area inside or outside an object forms the first corner of a box defined by the Box method. Auto and Add are the default methods.
Switches to the Single method: selects the first object or set of objects designated rather than continuing to prompt for further selections.
Subobject (not available in AutoCAD LT)
Allows you to select original individual forms that are part of composite solids or vertices, edges, and faces on 3D solids. You can select one of these subobjects, or create a selection set of more than one subobject. Your selection set can include more than one type of subobject.
Pressing and holding the Ctrl key is the same as selecting the SELECT command’s Subobject option.
Ends the ability to select subobjects. Allows you to use object selection methods.
Читайте также: