Не работает нажим пера в clip studio paint
If you are drawing on a tablet connected to a computer and the coordinates are not correct, or pen pressure is not detected, please check the following items in order from the top.
Note
If the coordinates are misaligned or the pressure does not work in other graphic software, please contact the pen tablet's manufacturer.
If you are using a Wacom product such as from the Cintiq Companion or Mobile Studio series, please also check the contents of this page.
Checking your connected display monitors (Windows 10)
If you have multiple monitors connected, please refer to the following FAQ.
Checking "Using tablet service" (Windows 10)
(1) Start Clip Studio Paint and open [Preferences].
(2) Select [Tablet], check [Wintab] under [Using tablet service], and click OK.
For Tablet PCs
Please note that the settings are different for tablet PCs such as the Surface series.
See the following page for more information.
Resetting the pen tablet driver (All platforms)
Follow the instructions provided by your pen tablet manufacturer to reset the pen tablet driver.
For Wacom products, please refer to the following FAQ.
Reinstalling the pen tablet driver (All platforms)
Follow the instructions provided by your pen tablet manufacturer to reinstall the pen tablet driver.
(1) Uninstall the pen tablet driver.
(2) Install the latest version of the pen tablet driver.
Note: After uninstalling and reinstalling is complete, restart your computer.
Note
If you have more than one pen tablet driver installed, please uninstall all drivers and then install only the one you need.
For Wacom products
You can install Wacom pen tablet drivers from the following page.
Download drivers and manuals
People who read this FAQ also viewed FAQ like this.
Couldn’t find an answer to your problem?
Got Questions?
Clip Studio ASK is a support community for finding answers to your Clip Studio questions. Expert creators are on hand to help!
Pen Pressure Settings [Windows]
Adjusts the pen pressure sensitivity when using a tablet.
Before configuring the pen pressure settings, please connect the tablet and stylus you will use for drawing.
1 Select the [File] menu > [Pen Pressure Settings] to open the [Adjust pen pressure] dialog box.
2 Adjust the pen pressure sensitivity from the [Adjust pen pressure] dialog box.
(1) Draw on the canvas with your usual pen pressure, while deliberately increasing and decreasing pen pressure.
(2) Click [Check adjusted settings].
· If the [Show pen pressure graph] is turned on, the [Adjust pen pressure] dialog box will display the pen pressure graph. You can change the pen hardness by adjusting the pen pressure graph curve.
· On Windows, if pen pressure isn’t registering on the canvas or if you cannot click [Check adjusted settings], click [If the “Check adjusted settings” button isn’t clickable even after drawing a line] and follow the instructions.
· When using a Wacom stylus with an iPad or an iPhone, click [If using Wacom Stylus Pen] and follow the instructions on the screen.
3 When the [Check adjusted settings] dialog box appears, you can further adjust the pen pressure sensitivity.
(1) Draw with your usual pen pressure on the canvas. If you are satisfied with the result, proceed to step 3. To further adjust the pen pressure settings, proceed to step 2.
(2) Click [Stronger] or [Lighter] to adjust pen pressure sensitivity. Draw on the canvas again, and adjust the pen pressure to your liking.
(3) Click [Complete].
Dialog box for adjusting pen pressure
(1) Show pen pressure graph
Turn this on to display the pen pressure graph.
(2) Check adjusted settings
Opens the [Check adjusted settings] dialog box. When this dialog box opens, you can draw with the adjusted pressure on the canvas.
(3) Reset to default
Resets the pen pressure settings to default.
(4) Pen pressure graph
Pen pressure sensitivity will be shown as a curve graph. You can adjust [Pen pressure] and [Output] by dragging the control points of the curve.
You can adjust the pen pressure sensitivity by dragging the control points of the curve.
· Drag a control point to change its position.
· Click on the curve to add a control point.
· To delete a control point, drag it outside the graph.
(5) If the “Check adjusted settings” button isn’t clickable even after drawing a line [Windows]
If the line isn’t reflecting pen pressure, you can change the supported tablet type to improve it. Click this to select the tablet type. This option will not appear if a supported tablet is not connected.
(6) If using a Wacom Stylus Pen [iPad/iPhone]
You can also adjust the settings of supported Wacom stylus pens. When using a Wacom stylus, your dominant hand and hand position can be simultaneously set.
[Check adjusted settings] dialog box
(1) Stronger
The stronger the pressure, the bigger the change. This option is more sensitive to changes in heavy pen pressure.
(2) Lighter
The weaker the pressure, the bigger the change. This option is more sensitive to changes in light pen pressure.
(3) Show pen pressure graph
Turn this on to display the pen pressure graph.
(4) Pen pressure graph
Pen pressure sensitivity will be shown as a curve graph. You can adjust [Pen pressure] and [Output] by dragging the control points of the curve.
You can adjust the pen pressure sensitivity by dragging the control points of the curve.
· Drag a control point to change its position.
· Click on the curve to add a control point.
· To delete a control point, drag it outside the graph.
(5) Complete
Applies the settings in the [Adjust pen pressure] and the [Check adjusted settings] dialog boxes and closes the dialog box.
Алёна, даже не знаю, если она у тебя ни мышки, ни стилуса не видит. Возможно это поведение программы у которой истекла лицензия, закончился триальный период. предположения.
Планшет: Gaomon m106k
Дарья, работало правильно,теперь нет, вспомни что до этого происходило. Может планшет драйвера обновил. Попробуй их откатить, поставь более старые. У меня когда то после обновления Виндоус стал стилус неправильно работать, вместо рисования в фотошопе работал как рука, а в клип студио мультитач переставал работать. Тогда откатить не удалось, хорошо Майкрософт потом исправило свой косяк.
Друзья, привет!
Подскажите кто знает, я уже замучилась с ним возиться.
Давно не рисовала. Тут ужалило, решила накатить обновление.
Теперь вообще не открывается. Висит в трее, прыгает 3 секунды и пропадает, не открываясь.
Макось.
Сталкивался кто-нибудь?
Daniil, зарегистрируй как материал, поставь там галочку использовать для текстур. Можешь и другие настройки по-изменять в том окне. В частности, как текстура будет заполнять холст (там всего три варианта). После того как создашь, вытащи ее на холст. Появится слой с текстурой. Примени к нему Clip at Layer Below. Подразумевается, что слой с объектом у тебя находится прямо под текстурой.
Дополнительно можешь у слоя с текстурой изменить режим наложения, прозрачность. Кроме того, можешь его растрировать и применить деформацию чтоб лежала по форме. Растрировать лучше с отключенным режимом Clip at Layer Below. Короче, текстура должна быть с каким то запасом, иначе при деформации она может не покрыть весь объект.
Here are some troubleshooting steps to get pen pressure sensitivity to work with Clip Studio Paint (Windows). These fixes should apply to those using pen tablets, pen displays or Windows tablets.
I actually wrote this article as a checklist for myself.
1. Found out whether it's a hardware or software fault?
Is pen pressure working with other drawing apps?
I recommend you install some of these drawing apps to test for pressure sensitivity first:
Medibang Paint and Wacom Bamboo Paper are the apps I always use for testing because pen pressure will almost always work by default.
If pen pressure sensitivity works with any of the apps listed above, it means it's not the hardware fault of your pen tablet or pen display.
2. Change the preferences for WinTab vs Tablet PC
Inside Clip Studio Paint, go to menu File-Preferences (Ctrl+K) to open the Preferences dialogue box, choose Tablet from the list of tabs.
Under "Using tablet service", toggle between the two options Wintab and Tablet PC, then test for pen pressure.
Pen pressure should work now. Changing other settings further down is usually not necessary.
"Wintab" is actually meant for pen tablets and pen displays that connect to a computer. "Tablet PC" is meant for Windows tablets or those touchscreen 2-in-1 convertible laptops. The thing is Windows sometimes doesn't know which driver to use so it uses the wrong driver. Hopefully buy toggling between Wintab and Tablet PC, you can get pressure to work.
3. Check Windows Ink
Most drivers for pen tablets and pen displays should have the Windows Ink option under Pen Settings.
This should apply for drivers from Huion, XP-Pen, Gaomon, Veikk, Artisul, Ugee, Parblo, Bosto and other brands.
I apologise for my dumping of a tech problem here and hoping for an answer but I'm really at a loss for what to do. I work freelance and a huge project for me depends on me using Clip Studio Paint as it's a comic book.
Recently I had to reformat my PC completely, and since the reformat and reinstall, Clip Studio Paint has refused to launch. Trying to launch the program results in nothing onscreen. Looking in Task Manager, it appears under "Background Processes" for a few seconds, until disappearing altogether.
There are no error messages onscreen or anywhere else, it's simply a failure to launch.
I have tried: Rebooting PC Repairing Install Uninstall/Reinstall Installing on a different drive partition Installing on a different physical hard drive Installing under a different Windows user account Troubleshooting/Compatibility mode
All result in the same perplexing behaviour.
This is a clean installation of Windows 10 Pro 64bit. Clip Studio Paint worked great on this same machine, so I don't think my hardware is the problem. Both harddrives are relatively new and pass all checks.
My PC information: OS: Windows 10 Pro 64bit CPU: AMD FX-8300 RAM: 8GB Motherboard: ASUSTek M5A78L-M/USB3 GFX: NVIDIA GeForce GTX 960 Storage: 4TB across 2 physical drives. Approx 3TB free. Tablet: Wacom Cintiq 13HD
I do not have the "Windows Creator" Update yet. Is that relevant? Thanks in advance to any who can help me with this problem. I'd offer you money but I'm broke and need to do my work in order to not be broke. A dedication in the comic will have to do!
EDIT: Event viewer cites DistributedCOM under SYSTEM and ERROR: The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID and APPID It says something about an SID being Unavailable and says the security permission can be modified using the Component Services Administration Tool.
It also cites "The start type of the Background Intelligent Transfer Service service was changed from auto start to demand start."
Читайте также: