Lgup программа для прошивки
LG Flash tool is the best KDZ Flash software for all kind of LG Android smartphones and tablet devices. Bear in your mind that Android rooting is not that safe which means it takes a little bit risky to your device. If you don't know the true procedure of flashing it will cause to brick or damage your device permanently. So we advise you to follow a complete tutorial before going with any kind of flash tool download or you will lose your Android smartphone.
No need to worry, follow our complete guides and then you'll learn how to flash your device without any trouble. The latest application has powered with a modified version of UptestEX 1.2.3.1 and now it is compatible with almost every LG smartphone. so that, all the users are able to flash stock ROM firmware no matter with both KDZ or TOT file extensions.
Additional features of LG Flash Tool
Download LG Flash Tool Latest Version
The official flash tool download is able to perform throughput to upgrade, downgrade or repair LG Androids with the exposed direct download links. So if you have an LG smartphone that sends plague error reports or if the device does not respond correctly with inputs, download LF Flash tool or LGUP. Either way, the exciting KDZ or TOT stock ROM is being flashed. The newly downloaded stock ROM replaces the long occupied factory installed firmware. Hence, need to find the correspondent and the relevant stock ROM firmware that intuitive with the device's build number perfectly. Otherwise, the entire mechanism automatically malfunctions and interactive to a bricked device at the end of the procedure.
The LGUP is the specially designed edition to flash LG smart devices that run with Android Marshmallow and higher editions. The mechanism uses the previously released LG flash application during the replacement of the stock ROM firmware. All the KDZ files in an LG smartphone are able to flash with this LGUP tool as same as the ordinary LG flash.
System Requirements
- A Windows personal computer to execute the exposed application.
- Perform the flash tool download on your PC and unpack it.
- Some apps need to install MegaLock.dll before executing the flash tool.
- Enable USB debugging mode from the developer options menu. If the developer options menu item does not visible, open about device menu and then tap seven times on the build number.
- Boot the smartphone into download mode. Switch off the LG smartphone and hold down Power + Volume Up to start the mobile in download mode.
- Install the latest version of device USB driver software is highly recommended for the installation.
- Install Visual C++ runtime library if the application does not respond correctly.
- Maintain enough battery level during the procedure.
Process of Stock Firmware Install with LG Flash
- First, install the application on the gathered Windows personal computer as a regular application.
- If you are trying to flash with LGUP flash tool, you have to install LGUP_8994_DLL_Ver_0_0_3_23 file first and then LGUP_Install_Ver_1_14_3 file on your computer.
- Enable USB debugging mode from the developer options as described above.
- Boot the device into download mode now.
- Connect the download mode activated smartphone to the PC using a recommended USB data cable.
- If use LG Flash Tool,
- Load the downloaded KDZ firmware into the "Select KDZ file" area.
- Then you have two options to select that "Normal Flash" and "CSE Flash".
- Select Normal Flash option to replace the stock firmware without eliminating data and files.
- If you select CSE Flash, it will empty the entire storage and then replaces the firmware with boot files only.
- Complete the form that displays in the next step and then continues the procedure.
- If use LGUP Tool,
- Open LG flash tool on the Windows personal computer.
- Setup the application to use "Board DL" mode and load the KDZ file here.
- Start the flash procedure with board DL mode.
Developer Credits
There are two main applications have exposed here to download for the sake of flashing the stock ROM firmware of KDZ or TOT file running LG OEM Smart devices. Both LG Flash and LGUP tools work fine when attempting to flash the stock ROM. If any LG mobile reports errors with app crash or you troubled with a boot loop, this apps will revamp devices in a short while.
LGUP is a smart tool you can download for free for the requirement of complete flash. The tool here adds support for all the LG device variants that takes KDZ, TOT, or Bin Stock firmware formats. And with its, all ease at use promising the highest success in the flash at the end has made more users attracted for it. So if you feel like having more powerful system alterations on your LG smart device, it is the time to go on with LG UP Tool. And go through the whole note for all the instructional manuals to make sure you are making no mistakes.
The device in your hand becomes more useful when it is in an improved frame. So everyone loves driving your device performance to an update and fresh state as much as possible. And for that, flashing is a great privilege from which you can get advanced system alterations. But you should always check for the most fitting tool solution from which you can increase the chance of success in flashing at the same time dropping down the risk of failure.
Why Should you Flash Stock Firmware?
Flashing a stock firmware is useful in a number of ways to your device. One thing is it is helpful in downloading the most recent firmware on your LG smart device. So if you believe upgrading to the latest possible firmware increases the performance of your operating system, you can easily make that happen with LG UP.
Another most often possible situation that requires you to download LG UP is bringing your device back to the stock state removing a number of advanced alterations you have tried. In fact, think of a situation you have rooted the device and now feel a little slow and messy. So in such a situation, you can make use of stock firmware flash to get back in the stock like state removing all the changes you had with Android root. And similarly, there could be times you are worried about the changes had after custom firmware flash which would make you turn back to the stock state. So simply, LGUP tool is an ideal option to recover your bricked Android to make that working again. But this tool supports exclusively for LG devices through Windows PC.
So, Why LG UP Tool?
To make your need of flash successful, there is a number of tools available in the market. If you have been in touch with all these fields, you must know that tools like LG Flash Tool which are also coming with the same proficiency but different only in certain aspects. In fact, LG UP is a well-developed tool for all LG device flash addressing all the places previously mattered and found as drawbacks. There, LG UP follows more developed scripts than all previously released flash tools. So reaching the should-have standards, here LG UP promises highest device support and the results at the end. And there in considering all the facts, the LG UP tool is comparatively an up to date program that provides you with the essential features and functions.
The best thing here about LGUP is its simplified work frame. In fact, it gets simpler and more comfortable with every version press forward. So other than wasting time with none-developed flash tool versions and variants, you are safe with the program LG UP here in a simpler yet convenient work frame. And as it is small in size, you can easily make use of it through the most developed software version for totally free.
LGUP Tool Compatible LG Devices
Like many other flash tools available for Android today, LG UP also works through Windows. So there is yet no way to take the program directly on your handset with support to the APK format. In that way, to make use of LGUP tool, you must have your Windows PC prepared with correct installation of drivers. And for the good news, we find the tool supporting for all the Windows versions as Windows XP, Windows 7, 8, 8.1, and also up to Windows 10. And although it was quite complicated in its previous tool versions, by now it promises for the highest compatibility through necessary adjustments.
Note: there could be various sources providing you download links to different LG UP Tool versions. So remember to follow our download section to get with the correct tool support as there could be links bringing harmful effect on your system. And remember, LG UP is an exclusive tool you can run through Windows PC but nothing further. And there is yet no support for APK for which developers would probably take more time ahead. So stay tuned for all LG UP updates.
Latest Features of LG UP Software
As a reliable flash software for all LG smart devices, the LGUP tool features important aspects. The first most important thing is its simple build and free availability. This tool comes here in a lightweight package as a single executable file. So there anyone can easily launch and use the tool here for completely free charges.
As we already know by now, the software here comes in regular update cycle adding up the most essential changes and additions to the tool package. So with that, it gives support to almost all the LG device variants in the lineup covering up to the latest. And with its feature of saving logs, you can easily take the track of the process in any case you have gone mistaken in flashing progress. So everything here comes together making the most reliable tool privilege to the user. We recommend you to continue with the most recent upgraded tool version to increase the chance of success in the end just taking a minimum time border.
Download LG UP Tool
As we previously stated, the tool here comes as a light-weight zip file to easily download and make use of. The zip file here includes LGUP install file and DLL file which equally appear in .MSI arrangement and supports you process through the Windows PC. So here you should install both the files on the PC in order to make the flash tool properly working. And also to make the PC ready, you should take several minutes to install correct LG drivers on the PC. So here make sure to check for the most fitting driver’s software here to get the best connection to the program. Before you start flashing with LG UP, we recommend you a full backup of the existing data. And then make sure to enable USB debugging mode from your LG device’s settings in order to make a successful connection with the program. If all done, make your PC ready with any Windows operating system running to successfully engage in the processing LG UP Flash here for free.
How to Install LGUP Tool on PC
Before making use of LG UP for any need of file flash, you should run the installation of the tool on the PC correctly. So catch the steps here to make sure that you are not going to miss an important step in the complete installation.
Step 01: Download LG UP zip file from the official site or our download section and go with extracting the LG UP Flash Tool on the Windows PC
Step 02: As above stated, download and install correct LG Drivers on the PC if you have not yet installed
Step 03: Take a look at the two files in the LGUP folder. Then continue with the installation of the LGUP_8994_DLL_Version_0_0_3_23.MSI. From this, you will automatically get installed several DLL files
Step 04: Once you are done the previous step, go on installing the other file LGUP_Install_Ver_1_14_3.MSI which is executable. And then, follow the screen directions to reach the installation successfully
So in several minutes, you will be done with the steps having successful LGUP Flash Tool installation on the Windows PC. Then you can now use this LG UP flash tool to install the stock firmware on your LG phone.
Flash LG Firmware on your LG Device
As we have previously discussed, you can easily operate LG UP Flash Tool to a successful LG Flash just in the way you desire. So go through the step guide below and learn the complete manuals.
Step 1: Download Free LG UP and install the tool on the Windows PC
Step 2: Install USB drivers if you have not yet installed
Step 3: Now use a proper USB cable and connect the LG handset to the PC
Step 4: Then you should see your LG smart device listed on the LGUP tool interface if it is successfully recognized. But in case if not, you should reconnect the device until it gets successfully connected
Step 5: Now make sure the BIN file is chosen on the flash tool interface and it is directed in the File Path which is towards MM KDZ you must have downloaded in order to install on the LG Device
Step 6: The important step here is to shut down LGUP tool
Step 7: Then as the step next, launch LGUP once again where you should note that the certain MM KDZ file is showing in the file path section of the tool interface
Step 8: If done, choose the option “REFURBISH” in the flash tool interface and see whether the BIN file is selected/ ticked. Then continue with option “Start”
Step 9: Let the process steps forward and gets completed systematically. At the end of all processing, your LG device will restart. And if you are all done in the flashing process, you could unplug the device connected from the Windows PC
Step 10: Restart once again and enjoy the freshly installed firmware on your LG device
Final Words
As we discussed through various sections, using LGUP Tool you can successfully install KDZ, TOT, or Bin Stock firmware to your LG device. And as you might have already known, from that you get a lot of uses simply making your device back working state preventing from a number of severe situations like boot loops, device bricks and etc. So in overall, this is a good support to any LG device user in getting the device capabilities to sharpen. In fact, it could make your system positively alternate and results from optimized device run. But remember that it could void your device warranty when you open doors for the more optimized run on your Android. So have good caution throughout the process and always choose to continue with the latest possible tool version. Always start with a complete backup of the existing data if you really want to keep your data safe even after all process is over.
Introducing the latest LG Flash Tool 2025 - an upgraded flash tool fixing bugs that detected previously, released flattening the GUI and expanding the compatible devices database. The secure enclave source codes provide the foundation to reject incompatible firmware to avoid bricking. LG smartphone Flash Tool has now consolidated the modified UptestEX 1.2.3.1 version to establish the support with a large range of LG Androids.
LG Flash Tool help you to perform a factory reset, install the KDZ or TOT stock firmware on an OEM-branded LG smart device. Flash devices in order to ADB fastboot commands is the focused task of this tool. LG Flash is now paired with restoring back an LG smartphone while it sending error reports with an application that systematically or manually installed on the Android operating system. Working with KDZ files larger than 1GB and the most compatibility with almost every LG smartphone can expose as main interests of LG Flash. Rendering downgraded or upgraded stock ROM firmware the flash tool accelerates the device speed plus boosting performances.
Latest Features of LG Flash Tool
Compatible with Every LG Smartphone
- The latest application has upgraded with a modified version of UptestEX 1.2.3.1. This causes all the LG smart devices compatible with this tool as never before. Consequently, it is able to flash every KDZ and TOT firmware running LG devices by means of lgflash Tool. Noting to worry about incompatibility errors anymore.
Redesigned GUI
- LG Flash Tool can directly with download any Windows platform without any support tool such as a PC suite. This is a featured application which can perform alonely. There is no any matter with an installed PC suite or another supportive tool also. Thereupon you are free to use the new flash application with or without an LG support tool.
Works without LG Support Tool
- The newest tool version improved with a fully simplified graphical user interface. The facility makes easy to work with the new interface even the tool uses a newbie. There is no any signal of upcoming errors with the simplified LG Flash Tool design. Just a few steps to flash any KDZ or TOT firmware.
No need to use Host Files
Download LG Flash Tool
This is the best and only ROM flashing tool that has specially designed for the LG Android smartphones and devices. The latest version of this tool is working with KDZ files larger than 1GB size. Also, this tool is compatible with Windows 7, 8 and 10 running PC to flash KDZ ROM on an LG smartphone. LG flash tool is developed and distributed by the XDA developers with free of cost. If you're an owner of an LG smartphone or tablet device, lgflash tool is the best way to install official firmware to restore your device. In another case, if you're following a serious issue with your smartphone or you want to change the device firmware, this is the nominated utility that should installed on your computer. In here, we have provided the direct download links for all the latest and available versions of the tool for the Android users.
Requirements to flash Stock ROM with LG Flash
- A Windows Computer to execute the application.
- ADB and fastboot driver installation. latest version from the given download links.
- Megalock.dll file to replace in the file location.
- Installation of the latest version of device USB driver software.
- Collect a USB data cable that better suite with your smartphone.
How to Flash LG KDZ Rom
- Download and install the latest version of LG USB driver software on your Computer.
- Extract the compressed zip file and then execute the app on the PC.
- Boot the smartphone into download mode pressing and holding relevant buttons after shutting down.
- Connect the smart mobile device to the PC using a recommended USB data cable.
- Load the downloaded KDZ file into the application clicking on the select KDZ file area.
- Click the start button and then fill the required details from the next form and continue the process.
- Wait until the process completed without operating the device.
- Once finished the entire flashing mechanism, it will notify that the process has been completed.
LGUP Tool for Flash KDZ, MM/LP or Factory Reset
Here is another LG family flashing tool entitled LGUP that addresses KDZ firmware files in blazing fast and to reset devices to factory settings. This is an updated version related to LG flash tool and it specially updated sequential Android Marshmallow and higher versions flash. You are eligible to boot up faster, launch app repairs or restore to factory settings on LG G4 - the first smartphone that released installing Android Marshmallow or recently unveiled latest LG Androids with the latest flash tool. The LGUP tool is combined with ultra-versatility of app installations on every OEM-LG devices since the beginning. It integrates flash LG stock firmware that normally followed KDZ file format or any of adjustable processes that upgrade, downgrade or restore the firmware processing and more others.
Backup all personal files and other important things are extremely demanded while utilizing this flash tool on an LG smart mobile device. You are able to follow the same instructions of the lgflash tool. There are some special requirements need for the manner. The latest tool allows upgrading to MM from the regular LP files without any data loss. Download the MM KDZ stock firmware to make changes with this application. Ticking the BIN File is recommended. This manner is totally reversible and you can restore the LP file once again using the same way replacing MM to LP. Flash stock ROM firmware with LGUP is simple than ever. Follow the exposed simple steps to stock ROM firmware flashing with LGUP.
- Power off the smartphone and close the application from the computer.
- Boot the smartphone into download mode. Normally, the LG devices can start in download mode using these steps. Power off the mobile>> Holds down Power+Volume Up buttons.
- Open the previously detailed LG flash on your PC.
- Set LG Flash tool to use "Board DL" and load TOT or KDZ firmware.
- Start flashing with board DL option.
Troubleshoooting Tips
- If you unable to execute LG smartphone flash tool on the desired Windows PC, try to install Visual C++ runtime library.
- If the application sends an error message informing that the phone is disconnected from PC, check the connected USB port first. If you have attached to a USB 3.0, detach the code and connect it to a USB 2.0 one.
- Check Whether the downloaded LG flash version works properly if the app does not perform correctly.
- Install the required tools and DLL files before starting the process to prevent error connections.
- Enable USB debugging is recommended before starting the mobile device in download mode. That is why go to developer options and then enable USB debugging mode.
- Make sure that the downloaded KDZ file is completely compatible with the device build number.
- If you need to run the flashing process without losing any data, select "Normal Flash" option from the interface.
- Refresh the mobile device with wiping all the files from the smartphone and restore back with boot files, use "CSE Flash" when starting the flash procedure.
- When using the LGUP application, install LGUP_8994__DLL_Ver_0_0_3_23 first and then install LGUP_Install_Ver_1_14_3 to avoid misbehaviors of the flash tool.
- If LGUP program displays the mobile as an Unknown Device, do not turn off the mobile with the power button. Remove the back cover of the device then remove the battery and replace once again. Let the mobile start automatically.
Conclusion
When an LG smartphone gets errors with applications that installed in the standard Android OS or with third-party apps that manually installed by the user, the reliable solution for the manner is to flash the mobile device by means of lgflash tool. The total credits for creating the application goes to XDA developer "quangnhut123". If any matter arises while configuring Android Marshmallow or higher versions, take the turn to download LGUP tool and you will able to flash KDZ files on LG OEM devices by means of the regular LG flash tool. The developer credits for LGUP flash application acquired by the app developer "shakeyabooti". Use this flashing tool for the best results of revamping devices from software issues.
Как получить root
1. Загрузите бут для своей версии прошивки.
2. Перегрузитесь в fastboot и разблокируйте загрузчик
3. Перепишите новый boot.img. Например, если установлена прошивка v10P4. Перегрузитесь и установите Magisk Manager
5. Наслаждайтесь рутом.Также с помощью Octoplus JTAG PRO можно прошить инженерный бут для получения Root!
laf_a-46 laf_b-67Прошил свой Lg G710ULM на андроид 9(корейская прошивка). Пишу инструкцию, может кому полезно.
1) Все скачиваем.
2) Устанавливаем драйвера
3) Распаковываем архив LG UP. Выглядит вот так:4) Устанавливаем LGUP_Store_Frame_Ver_1_14_3
5) Затем от имени администратора открываем bat файл SetDev.bat
6) Выключаем девайс
7) Зажимаем кнопку Громкость + и подключаем смартфон к ПК(загрузится в Download mode)
8) От имени администратора запускаем LGUPD
9) Внизу выбираем через 3 точки нашу прошивку, обязательно ставим галочку на PARTICION DL, нажимаем Start
10) Появляется окно Particion list, ставим галочку Select all и ok.Ждем конца прошивки, не отключаем смарт, перезагрузится 2 раза. Только когда увидите 100% и надпись Complete, можете отключить от ПК.
По вопросам можно в личку. За ссылки и помощь спасибо ув. ZNCHNK.
прошивка стоит g710ulm.
Google pay естественно скорее всего не работает (сюдя по отзывам на 4pda и xda).В шапке правда шьют обновление той же версии ULM, но если почитать всю тему то есть люди которые шили прошивки от Verizon (G710VM) и у них заработал Gpay и даже OTA обновления.
Сам себе отвечу. Прошил вчера телефон на прошивку от оператора Verizon (USA) и Google pay заработал (хотя графа с серийным номером так и осталась пустой). Сразу после этого пришли исче 3 обновы на телефон (OTA). На даный момент у меня последняя прошивка с системами безопасности на 1 февраля 2019.Пожалуй напишу тут мини инструкцию как я делал. Но перед тем как делать да читайте все до конца.
1. Скачиваем на комп прошивку VRZ (от 14.03.18 или от 07.11.18)
2. Удаляем с компа весь установленый софт от LG (если есть).
3. Скачиваем LGUP Dual.
4. Скачиваем и устанавливаем драйвера LG
5. Запускаем файл setdev.bat от имени администратора(в папке с LGUP)
6. Запускаем LGUPD.exe.
7. Переводим телефон в режим загрузки (Download mode).
8. Далее выбираем файл прошивки VRZ. Ставим галочку в окне LGUP dual напротив надписи partition dl
Далее нажимаем кнопку Start. Начнеться закачка прошивки на телефон (гдето ~2 мин). По окончанию LGUP высветит надпись, что все закончилось, а телефон перезагрузится и будет висеть на экране загрузки с надписью Verizon (я ждал 30 мин и телефон так и не загрузился)
9. Дале я выдернул кабель с телефона и принудительно перезагрузил телефон до входа в boot меню и там выбрал "выключить телефон (зажимаем кнопку громкости вниз и кнопку питания и ждем пока не высветиться экран с надписями где можно будет выбрать "Turn Off")
10. Переводим телефон снова в режим загрузки (7 пункт).
11. Заново прошиваем телефон той же ж прошивкой только теперь выбираем режим "refurbish". По окончанию телефон сам перезагрузиться уже в систему.
-----
Я не исключаю что возможно я сделал что-то не правильно. Возможно можно было сразу шить в режиме refurbish, но я этого не могу утверждать.------
Есть ище один вариант описанный недавно на ХДА. Чтобы не шить второй раз прошивку в режиме "refurbish", можно проделать следующее:
После того как ваш телефон повис на экране загрузки после первого прошивания в режиме partition dl, нужно не выдергивая кабель с телефона зажать кнопку громкости вниз и кнопку питания и держать так пока экран не потухнет. И сразу после того как экран потух отпускаем обе кнопки и нажимаем и держим кнопку громкости вверх. Это сделает полный вайп прошивки и после этого телефон уже должен загрузиться в систему (в таком случае пункт 9, 10, 11 инструкции можно пропустить).
------
Есть один нюанс. На этой прошивке нужно самому вручную вводить настройки интернета вашего провайдера (создать точку доступа APN), ибо интернет соединение телефон сам не подхватит.
Сейчас телефон работает без проблем (сеть, смс, 3g, 4g). Весь хлам от Verizon можно отключить в настройках, что я и сделал.
Украинского языка нет, но можно поставить morelocale2 с маркета, дать ему разрешения через adb и применить укр.язык (настройки все ище будут на русском, но другие программы уже будут думать что у вас установлен укр.язык и соответсвенно ставить автоматом укр.
Также поставил Fluid Navigations (управление жестами). Навигационные кнопки убрал без проблем с помощью adb.
Скорость анимаци поставил 0.5х (в режиме разработчика)
Сейчас телефон летает не хуже чем OP 6t, при этом все очень плавненько, без дергань.
Как резюме - телефоном более чем довольный за свои деньги (260$ в состоянии нового).LGUP is a small tool that is used to flash KDZ & TOT Firmware on LG phones. It is an alternative to LG Flash Tool and used in many cases where we can’t use the LG Flash Tool. Like when you want to flash the firmware of different regions then you can use LGUP Tool. Here you can download LGUP Tool to flash KDZ & TOT firmware (All versions).
LGUP tool helps users to update LG phones, fix LG phones, and reset LG phones all using the KDZ & TOT firmware. So if you are planning to flash firmware or update file on your LG smartphone then here you will get the links to download latest LGUP tool.
Table of Contents
LGUP Tool – Features
- Easy to Use: It is a small tool that is easy to install on Windows PC. And it also very easy to flash KDZ & TOT files, all you need is just one look at the instruction.
- Support All Phones: The LGUP tool supports almost all the available LG smartphones including the latest phones. It is designed with binaries same as LG phone, so it will also support upcoming LG phones.
- Multiple Options: The tool offers multiple options to choose from while flashing the firmware on LG phones. Options include Refurbish, Upgrade, Phonesetting, and FOTA upgrade.
- Easy Detection: LGUP tool easily detects the phone which is connected to the PC. Sometimes we don’t even need to install LG USB Drivers (works in case of a few latest LG phones).
Download LGUP Tool (All Versions)
How to Install LGUP Tool on Windows PC
If you have an older version of LG UP tool then the installation is easy. Just double click on the application file and install the tool by following the instructions provided by the setup wizard. But the new version has a different installation process as now it has two different files. Follow the below steps to install LG UP tool on your PC.
- Extract the recently downloaded LGUP tool zip file.
- Open the extracted LGUP folder.
- There you will see two files. So first install the LG_UP_DLL file (LGUP_8994_DLL_Ver_0_0_3_23.msi).
- Now run the LG_UP_Installer file (LGUP_Install_Ver_1_14_3.msi) and install it by following instructions given by the installation wizard.
- Download LGUP_Common zip file and extract it.
- Open the extracted folder and you will find a common folder. Copy the common folder to the location (C:\Program Files (x86)\LG Electronics\LGUP\model). It will help to fix LGUP can’t load the model error.
- After this now you are all set to use LGUP on your PC.
How to Use LGUP Tool to Flash KDZ & TOT Firmware
The LGUP tool lets users flash TOT & KDZ firmware on LG phones with multiple options for user convenience. Mostly the tool comes into use when any OTA update arrives in some region but not in your region, then you can use LGUP to flash KDZ firmware to update the phone. Follow the prerequisites before flashing any firmware using the LGUP.
Prerequisites
-
(To avoid data loss)
- Install LG USB Drivers on your PC
- Charge your LG Phone to at least 50%
- Download KDZ or TOT Firmware for your device
- Install ADB & Fastboot drivers on PC
Steps to Use LGUP
- Completely Power off your phone.
- Boot your phone into Downloadmode.
- While in Download mode connect your phone to the PC using a USB cable.
- Open LGUP on your PC.
- It will automatically detect the phone.
- Make sure the BIN File is marked. Now click on BIN File and load the KDZ or TOT firmware that you want to flash.
- After selecting the firmware file select the installation option.
- Select ‘Upgrade’ if you want to keep the data on your phone.
- Select “Refurbish” if you want to erase all the data and clean install.
- Then click on “Start”.
- It will take time to flash so wait for the process.
- After finishing, the phone will reboot and Done.
This is how you can use LGUP to flash KDZ & TOT Firmware on LG phones. So there you have it the complete guide on LGUP Tool including download links and user guide. Enjoy flashing.
Читайте также: