Команда xclip в автокаде
Команду XClip можно запустить, введя XCLIP в командной строке. После нажатия Enter нам будет предложено выбрать объект. Объект может быть внешней ссылкой или даже блоком.
Как сделать Xclip изображения в Autocad?
Вырезать изображение
- В командной строке введите IMAGECLIP.
- Выберите изображение для обрезки, выбрав границу изображения.
- В командной строке введите n (новая граница).
- При появлении запроса введите n (Нет) или y (Да), чтобы удалить старую границу.
- Введите p (многоугольная) или r (прямоугольная), а затем нарисуйте границу на изображении.
Как редактировать Xclip в Autocad?
Нажмите Меню «Изменить» > «Клип» > «Внешняя ссылка». Выберите внешнюю ссылку. В командной строке укажите New Boundary, нажав Enter. Выберите полилинию или укажите прямоугольную или многоугольную границу отсечения. …
Как использовать команду обрезки в Autocad?
Граница отсечения определяет часть экземпляра внешней ссылки или блока, которая скрыта снаружи или внутри границы. Видимость границы отсечения управляется системной переменной XCLIPFRAME. Совет: используйте общая команда CLIP для обрезки изображений, внешних ссылок, окон просмотра и подложек.
Как редактировать JPEG в AutoCAD?
Если вы увеличили масштаб и не видите рамки изображения, нажмите Shift + щелчок левой кнопкой мыши, чтобы выбрать изображение или изображения. Щелкните изображение правой кнопкой мыши. Щелкните Свойства. В палитре свойств выберите свойство, которое нужно изменить.
Как вырезать блок в AutoCAD?
Чтобы обрезать блок, запустить команду XCLIP введя его в командной строке или выбрав «Внешняя ссылка» в меню «Изменить» > «Клип». Выберите блок и следуйте инструкциям, чтобы создать новую границу, которая должна использоваться для обрезки блока.
Как скрыть границы Xclip в Autocad?
Как скрыть границы клипа в Autocad?
- Щелкните меню «Изменить» «Фрейм изображения объекта».
- Чтобы скрыть границы изображения, введите 0; для отображения и построения границ изображения введите 1; чтобы показать границы изображения, но не отображать их, введите 2.
Как использовать внешние ссылки в Autocad?
Прикрепить внешнюю ссылку
Что делает команда обрезки в Autocad?
Обрезает выбранные объекты, такие как блоки, внешние ссылки, изображения, видовые экраны и подложки, до указанной границы. Граница отсечения определяет часть изображения, подложки, видового экрана или внешней ссылки, которую необходимо скрыть.
Как создать полилинию в Xclip?
Следуй этим шагам:
- Создайте полилинию с этим параметром, а затем выйдите из команды XClip.
- Используйте команду PEdit для редактирования полилинии.
- Перезапустите команду XClip, а затем используйте команду «Создать | Выберите параметр полилинии, чтобы снова превратить полилинию в границу отсечения.
Как инвертировать Xclip в Autocad?
- Выберите границу XCLIP.
- На границе XCLIP будут показаны его ручки вместе со стрелкой.
- Наведите указатель мыши на ручку со стрелкой и обратите внимание на появившийся текст «Инвертировать границу x-clip». Щелкните эту стрелку, чтобы инвертировать x-clip.
Как использовать Xclip в Linux?
xclip -selection c отправит данные в буфер обмена, который работает с Ctrl + C, Ctrl + V в большинстве приложений. Если вы находитесь в режиме терминала Linux (без X), загляните в gpm или экран с буфером обмена. Попробуйте экранная команда readreg . В Windows 10+ или cygwin используйте / dev / clipboard или clip.
Как скопировать клип в AutoCAD?
Меню: Правка> Копировать. Контекстное меню: завершите все активные команды, щелкните правой кнопкой мыши в области рисования и выберите «Копировать из буфера обмена».
This week I’m excited to share another time saving and helpful tip with all of you. Today, we’re going to look at the XClip command within AutoCAD. The XClip command allows us to clip/crop an external reference (xref) or block to a specific area that can be defined by either a rectangle or polyline.
Other options within the command include the ability to invert or flip the clip, showing everything except the objects within the clipping boundary. You can even add a front/back plane to the clip, giving flexibility when using the command with 3D properties.
For today’s example, we will walk through how to initially set up an XClip on an xref as well as how to delete/remove the clip and how we can quickly modify it.
To get started we will need an xref or a block. In this image, an xref containing multiple staircase details/sections is attached to the drawing.
The XClip command can be started by entering XCLIP at the command line. After hitting enter, we are prompted to choose an object. The object can be an xref or even a block. For xrefs, the command can also be initiated by selecting the xref and choosing the create clipping boundary button on the contextual ribbon tab along the top of the screen.
After selecting an object or clicking the Create Clipping Boundary button, we then have a few options to choose. The Select Polyline or Polygon options allow us to choose a pre-drawn polyline/polygon from the drawing to use as a clipping boundary for our object. This can be very useful when needing to precisely clip around some objects in the xref by using an irregular shaped polygon.
The default Rectangle option is commonly used, allowing us to simply draw a box around the area we want to keep from the xref. The last option, Invert, will invert the selection we make, displaying the object not captured withing the rectangle or polyline/polygon.
Here, the Rectangle option is used.
After choosing an option and proceeding to draw a rectangle or select a polygon, the xref/block will automatically be clipped to the boundary chosen. This makes it very easy to keep a drawing clean when referencing in drawings that contain a large amount of data that may not be relevant to the current drawing/project.
A rectangle is drawn around the larger stair detail/section in the middle of the screen.
From here, we can simply continue on with our drawing now that the extra details have been cleanly removed and hidden from view. This is a nice option since the objects aren’t being deleted or even affected in the xref or block, simply clipped and hidden from view for the time being.
However, if changes are required, we have a few options still. To easily modify the clipping boundary, selecting the xref/block and moving the xclip grips (blue squares in the corners) allows us to dynamically change the boundary as needed. This will also work when a polyline/polygon was used as well.
This example shows the boundary now includes the detail to the left of the original boundary.
To quickly invert the clipping boundary, simply select the xref/block and click the up arrow at the bottom, as seen in the image above. This will invert the boundary, leaving us with the opposite effect.
Finally, to remove or delete the boundary restoring the xref/block to its originally extents we can enter the XCLIP command again at the command line, choose our object, and then select the delete option to remove the boundary. For xrefs, the remove boundary button from the ribbon can be used when the reference is selected.
I really like the XClip command to keep my drawings clean and uncluttered when using multiple references, especially when the references may contain much more data and linework than what is needed for my specific project. For civil projects, this could mean clipping a city legal property reference down to just a few lots that are needed for a specific site rather than cluttering and slowing down the drawing with an entire city worth of lots.
There really are endless uses for clipping references/blocks and I’m sure this command will come in handy and can be incorporated into your daily drafting practices.
To learn more about the Xclip command, including different options and to see it in use, be sure to check out my YouTube channel and the accompanying video below:
More Tuesday Tips
Check out our whole Tuesday Tips series for ideas on how to make AutoCAD work for you. Do you have any favorite AutoCAD tips? Tell us in the comments!
By:
Crops the display of a selected external reference or block reference to a specified boundary.
Find Find
The clipping boundary determines the portion of an xref or block instance that is hidden, either outside or inside the boundary. The visibility of the clipping boundary is controlled by the XCLIPFRAME system variable.
List of Options
The following options are displayed.
Displays the clipped portion of the external reference or block in the current drawing.
Displays all of the geometry of the external reference or block in the current drawing, ignoring the clipping boundary.
Clipdepth
Sets the front and back clipping planes on an xref or block. Objects outside the volume defined by the boundary and the specified depth are not displayed. Regardless of the current UCS, the clip depth is applied parallel to the clipping boundary.
Front Clip Point
Creates a clipping plane passing through and perpendicular to the clipping boundary.
Creates a clipping plane the specified distance from and parallel to the clipping boundary.
Removes both the front and back clipping planes.
Delete
Removes a clipping boundary for the selected xref or block. To temporarily turn off a clipping boundary, use the Off option. Delete erases the clipping boundary and the clipdepth. The ERASE command cannot be used to delete clipping boundaries.
Generate Polyline
Automatically draws a polyline coincident with the clipping boundary. The polyline assumes the current layer, linetype, lineweight, and color settings. Use this option when you want to modify the current clipping boundary using PEDIT and then redefine the clipping boundary with the new polyline. To see the entire xref while redefining the boundary, use the Off option.
New Boundary
Defines a rectangular or polygonal clipping boundary, or generates a polygonal clipping boundary from a polyline.
Defines the boundary with the selected polyline. The polyline can be open but must consist of straight line segments and cannot intersect itself.
Defines a polygonal clipping boundary with three or more points that you specify for the vertices of a polygon.
Defines a rectangular boundary with the points that you specify for opposite corners.
Inverts the mode of the clipping boundary: objects are clipped either outside the boundary or inside the boundary.
You can only create a new clipping boundary for a selected XREF underlay when the old boundary is deleted.
AutoCAD 2015, AutoCAD Architecture 2015, AutoCAD Civil 3D 2015, AutoCAD Electrical 2015, AutoCAD MEP 2015, AutoCAD Map 3D 2015, AutoCAD Mechanical 2015, AutoCAD P&ID 2015, AutoCAD Plant 3D 2015, AutoCAD Structural Detailing 2015, & AutoCAD Utility Design 2015
By:
Crops the display of a selected external reference or block reference to a specified boundary.
Find Find
The clipping boundary determines the portion of an xref or block instance that is hidden, either outside or inside the boundary. The visibility of the clipping boundary is controlled by the XCLIPFRAME system variable.
List of Options
The following options are displayed.
Displays the clipped portion of the external reference or block in the current drawing.
Displays all of the geometry of the external reference or block in the current drawing, ignoring the clipping boundary.
Clipdepth
Sets the front and back clipping planes on an xref or block. Objects outside the volume defined by the boundary and the specified depth are not displayed. Regardless of the current UCS, the clip depth is applied parallel to the clipping boundary.
Front Clip Point
Creates a clipping plane passing through and perpendicular to the clipping boundary.
Creates a clipping plane the specified distance from and parallel to the clipping boundary.
Removes both the front and back clipping planes.
Delete
Removes a clipping boundary for the selected xref or block. To temporarily turn off a clipping boundary, use the Off option. Delete erases the clipping boundary and the clipdepth. The ERASE command cannot be used to delete clipping boundaries.
Generate Polyline
Automatically draws a polyline coincident with the clipping boundary. The polyline assumes the current layer, linetype, lineweight, and color settings. Use this option when you want to modify the current clipping boundary using PEDIT and then redefine the clipping boundary with the new polyline. To see the entire xref while redefining the boundary, use the Off option.
New Boundary
Defines a rectangular or polygonal clipping boundary, or generates a polygonal clipping boundary from a polyline.
Defines the boundary with the selected polyline. The polyline can be open but must consist of straight line segments and cannot intersect itself.
Defines a polygonal clipping boundary with three or more points that you specify for the vertices of a polygon.
Defines a rectangular boundary with the points that you specify for opposite corners.
Inverts the mode of the clipping boundary: objects are clipped either outside the boundary or inside the boundary.
You can only create a new clipping boundary for a selected XREF underlay when the old boundary is deleted.
Команду XClip можно запустить, введя XCLIP в командной строке. После нажатия Enter нам будет предложено выбрать объект. Объект может быть внешней ссылкой или даже блоком.
Как сделать Xclip изображения в Autocad?
Вырезать изображение
- В командной строке введите IMAGECLIP.
- Выберите изображение для обрезки, выбрав границу изображения.
- В командной строке введите n (новая граница).
- При появлении запроса введите n (Нет) или y (Да), чтобы удалить старую границу.
- Введите p (многоугольная) или r (прямоугольная), а затем нарисуйте границу на изображении.
Как редактировать Xclip в Autocad?
Нажмите Меню «Изменить» > «Клип» > «Внешняя ссылка». Выберите внешнюю ссылку. В командной строке укажите New Boundary, нажав Enter. Выберите полилинию или укажите прямоугольную или многоугольную границу отсечения. …
Как использовать команду обрезки в Autocad?
Граница отсечения определяет часть экземпляра внешней ссылки или блока, которая скрыта снаружи или внутри границы. Видимость границы отсечения управляется системной переменной XCLIPFRAME. Совет: используйте общая команда CLIP для обрезки изображений, внешних ссылок, окон просмотра и подложек.
Как редактировать JPEG в AutoCAD?
Если вы увеличили масштаб и не видите рамки изображения, нажмите Shift + щелчок левой кнопкой мыши, чтобы выбрать изображение или изображения. Щелкните изображение правой кнопкой мыши. Щелкните Свойства. В палитре свойств выберите свойство, которое нужно изменить.
Как вырезать блок в AutoCAD?
Чтобы обрезать блок, запустить команду XCLIP введя его в командной строке или выбрав «Внешняя ссылка» в меню «Изменить» > «Клип». Выберите блок и следуйте инструкциям, чтобы создать новую границу, которая должна использоваться для обрезки блока.
Как скрыть границы Xclip в Autocad?
Как скрыть границы клипа в Autocad?
- Щелкните меню «Изменить» «Фрейм изображения объекта».
- Чтобы скрыть границы изображения, введите 0; для отображения и построения границ изображения введите 1; чтобы показать границы изображения, но не отображать их, введите 2.
Как использовать внешние ссылки в Autocad?
Прикрепить внешнюю ссылку
Что делает команда обрезки в Autocad?
Обрезает выбранные объекты, такие как блоки, внешние ссылки, изображения, видовые экраны и подложки, до указанной границы. Граница отсечения определяет часть изображения, подложки, видового экрана или внешней ссылки, которую необходимо скрыть.
Как создать полилинию в Xclip?
Следуй этим шагам:
- Создайте полилинию с этим параметром, а затем выйдите из команды XClip.
- Используйте команду PEdit для редактирования полилинии.
- Перезапустите команду XClip, а затем используйте команду «Создать | Выберите параметр полилинии, чтобы снова превратить полилинию в границу отсечения.
Как инвертировать Xclip в Autocad?
- Выберите границу XCLIP.
- На границе XCLIP будут показаны его ручки вместе со стрелкой.
- Наведите указатель мыши на ручку со стрелкой и обратите внимание на появившийся текст «Инвертировать границу x-clip». Щелкните эту стрелку, чтобы инвертировать x-clip.
Как использовать Xclip в Linux?
xclip -selection c отправит данные в буфер обмена, который работает с Ctrl + C, Ctrl + V в большинстве приложений. Если вы находитесь в режиме терминала Linux (без X), загляните в gpm или экран с буфером обмена. Попробуйте экранная команда readreg . В Windows 10+ или cygwin используйте / dev / clipboard или clip.
Как скопировать клип в AutoCAD?
Меню: Правка> Копировать. Контекстное меню: завершите все активные команды, щелкните правой кнопкой мыши в области рисования и выберите «Копировать из буфера обмена».
Читайте также: