Драйвер для самсунг j3 2017 для подключения к компьютеру
Владельцы смартфонов регулярно подключают мобильный девайс к ПК. Делается это для того, чтобы передать файлы с одного носителя на другой для дальнейшего использования. Но иногда пользователи сталкиваются с проблемой, когда телефон Samsung Galaxy J3 (2017) не видит компьютер. Почему так происходит, и что нужно делать в такой ситуации?
Почему Samsung Galaxy J3 (2017) не видит компьютер
Если человек подключает смартфон к ПК через USB-кабель, но компьютер никак не реагирует, значит, пользователь столкнулся с одной из следующих проблем:
- неисправность кабеля;
- поломка гнезда USB на одном из устройств;
- на компьютере установлены некорректные драйвера для смартфона, или их нет вовсе;
- при подключении выбрана опция «Только зарядка»;
- сбой в работе операционной системы одного из устройств.
Таким образом, все обозначенные проблемы можно поделить на физические и программные. Чтобы определить точную причину того, что телефон Samsung Galaxy J3 (2017) не видит ПК, нужно выполнить проверку оборудования и настроек обоих устройств.
Как решить проблему
Для начала вы должны убедиться, что для подключения используется исправный кабель. Самый простой способ – поставить телефон на зарядку с тем же шнуром. Если девайс заряжается, значит, проблема точно не в кабеле.
Второй момент, который пользователи часто упускают из вида, – выбран неправильный тип подключения. Когда человек соединяет смартфон с ПК, на экране мобильного устройства появляется уведомление, предлагающее выбрать один из нескольких типов сопряжения:
- только зарядка;
- камеры;
- медиаустройство и так далее.
По умолчанию указывается тип «Только зарядка». При таком подключении смартфон на ОС Андроид просто получает энергию от компьютера. Проверьте настройки сопряжения и выберете пункт «Подключить как медиаустройство» или «USB-накопитель». Только в таком случае ПК увидит телефон Samsung Galaxy J3 (2017), как полноценный носитель информации.
Если же при подключении мобильного девайса к ПК не происходит совсем ничего (гаджет даже не заряжается), нужно проверить работоспособность интерфейса USB на компьютере. Например, можно вставить флешку или подключить мышку.
Проблемы физического характера (поломка кабеля или разъема) решаются только заменой комплектующих. А в ситуации, когда вы выбираете правильный тип подключения (медиаустройство) и пользуетесь исправными аксессуарами, причиной появления ошибки становятся неисправные драйвера.
Как правило, они устанавливаются автоматически при первом сопряжении смартфона и ПК. Загружается ПО только при наличии соединения с интернетом. Если не подключиться к сети, драйвера загружены не будут. Поэтому рекомендуется проверить доступ к интернету.
Проверить работоспособность драйверов можно следующим образом:
- Открыть диспетчер устройств (Win+R и затем ввести devmgmt.msc).
- Найти в списке MTP-устройство или название телефона.
- Дважды нажать левой кнопкой мыши.
- Кликнуть «Обновить драйвер».
- Выбрать «USB-устройство MTP».
- Нажать «Далее».
- Дождаться окончания переустановки драйверов.
Если же в диспетчере устройств никак не отображается смартфон, есть смысл включить на гаджете Андроид режим разработчика:
- Открыть настройки телефона.
- Перейти в раздел «Для разработчиков».
- Активировать функцию.
- Кликнуть «Конфигурация USB по умолчанию».
- Выбрать значение «Передача файлов».
Когда не помогает ни один из предложенных советов, единственный выход – сбросить настройки смартфона. Эта операция выполняется в том случае, если владелец устройства подозревает, что сопряжение отсутствует из-за наличия вирусов.
Для сброса настроек нужно:
- Открыть настройки.
- Перейти в раздел «Восстановление и сброс».
- Нажать «Сбросить настройки».
После выполнения операции с мобильного девайса удалятся все файлы. Чтобы не потерять важную информацию, рекомендуется предварительно создать резервную копию.
Альтернативные методы подключения
Если соединить телефон Samsung Galaxy J3 (2017) с компьютером через USB не получилось, можно попробовать альтернативные методы передачи информации с одного устройства на другое:
Первый вариант не нуждается в подробном описании, так как в таком случае просто требуется вставить карту памяти в адаптер и подключить к ПК через соответствующий разъем. Но подобный вид сопряжения позволит лишь перекинуть файлы на флешку или с нее.
Чтобы получить доступ к памяти смартфона, нужно использовать соединение Wi-Fi. Для этого понадобится дополнительная программа. Например, MyPhoneExplorer. Ее следует загрузить как на ПК (с официального сайта), так и на телефон (через Google Play).
Дальнейшее подключение выполняется следующим образом:
- Подключить оба устройства к одной сети Wi-Fi.
- Открыть приложение MyPhoneExplorer на телефоне.
- Придумать пароль для подключения.
- Открыть программу на ПК.
- Нажать кнопку «Файл» и выбрать пункт «Подключить».
- Подтвердить сопряжение вводом ранее созданного кода.
Так смартфон сможет подключиться к ПК без использования USB-кабеля. В MyPhoneExplorer на компьютере отобразится список всех доступных файлов. Можно перекинуть информацию как с телефона, так и на него.
Как не столкнуться с проблемой в будущем
Чтобы впредь ситуация не повторялась, и телефон Samsung Galaxy J3 (2017) всегда видел компьютер, следуйте нескольким простым советам:
- Используйте для подключения только комплектные аксессуары. Не покупайте дешевые кабели.
- На телефоне выставляйте параметр «Медиаустройство» или «USB-накопитель».
- При первом сопряжении не забудьте установить драйвера и при необходимости обновить их.
Соблюдение всего трех правил раз и навсегда избавит от проблем при подключении телефона к компьютеру.
If you are an owner of Samsung Galaxy J3 (2017) and looking out for USB drivers to connect your device to the computer, then you have landed on the right page. Download Samsung Galaxy J3 (2017) USB driver from here, install it on your computer and connect your device with PC or Laptop successfully.
Here, we have provided two USB drivers for your Samsung Galaxy J3 (2017).
Download Samsung Galaxy J3 (2017) USB Driver
USB Driver Type: Samsung Driver
USB Driver Purpose: For flashing Stock firmware on your device.
File Size: 9 MB
USB Driver Type: ADB Driver
USB Driver Purpose: For connecting your device to a computer.
File Size: 8.3 MB
Steps To Install Samsung Galaxy J3 (2017) Samsung Driver In Computer
Video Tutorial
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download the Samsung driver and extract it on your desktop.
Step 2: Once extracted, you will see Samsung driver setup file. Click on it to launch the Installation Wizard window where you will have to choose the required language and your country.
Step 3: Now choose the destination folder (which is usually C:\Program Files\Samsung\USB Drivers) using the Browse button. Once done, click “Install” in the installation wizard window.
Step 4: Next, you will see the Installation Status Window. Now you will have to wait until the Window closes.
Step 5: Once the installation is finished, click “Finish” to close the installation wizard.
That’s it. Your Samsung device driver is now successfully installed on your computer.
Steps To Install Samsung Galaxy J3 (2017) ADB Driver In Computer
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download the driver and extract it on your desktop.
Step 2: Now, open Device Manager > Action > Add legacy hardware.
Step 3: Next, click “Next” in the Add legacy hardware wizard.
Step 4: Now choose “Install the hardware that I manually select from the list (Advanced)” and click “Next“.
Step 5: Once done choose “Show all devices“, click “Next” and select the extracted file manually from your computer.
Step 6: Now to start installing your new hardware, click “Next” again.
Step 7: Click “Install” in the Windows security prompt window.
Step 8: Next, click “Finish” to complete installation.
That’s it. Now you have successfully finished installing ADB driver in your computer. If you encounter any issues while following this tutorial, do let me know via comments.
Note: If you have bricked your Samsung Galaxy J3 (2017), download Samsung Galaxy J3 (2017) Stock ROM and flash it on your device using an Android flash tool.
If you are an owner of Samsung SM-J330G and searching for the USB drivers for your device, then you have landed on the right page. Download Samsung SM-J330G USB driver from here, install it on your computer and connect your device with PC or Laptop successfully.
Here, we have provided two USB drivers for your Samsung SM-J330G.
Download Samsung SM-J330G USB Driver
USB Driver Type: Samsung Driver
USB Driver Purpose: For flashing Stock firmware on your device.
File Size: 9 MB
USB Driver Type: ADB Driver
USB Driver Purpose: For connecting your device to a computer.
File Size: 8.3 MB
Steps To Install Samsung SM-J330G Samsung Driver In Computer
Video Tutorial
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download the Samsung driver and extract it on your desktop.
Step 2: Once extracted, you will see Samsung driver setup file. Click on it to launch the Installation Wizard window where you will have to choose the required language and your country.
Step 3: Now choose the destination folder (which is usually C:\Program Files\Samsung\USB Drivers) using the Browse button. Once done, click “Install” in the installation wizard window.
Step 4: Next, you will see the Installation Status Window. Now you will have to wait until the Window closes.
Step 5: Once the installation is finished, click “Finish” to close the installation wizard.
That’s it. Your Samsung device driver is now successfully installed on your computer.
Steps To Install Samsung SM-J330G ADB Driver In Computer
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download the driver and extract it on your desktop.
Step 2: Now, open Device Manager > Action > Add legacy hardware.
Step 3: Next, click “Next” in the Add legacy hardware wizard.
Step 4: Now choose “Install the hardware that I manually select from the list (Advanced)” and click “Next“.
Step 5: Once done choose “Show all devices“, click “Next” and select the extracted file manually from your computer.
Step 6: Now to start installing your new hardware, click “Next” again.
Step 7: Click “Install” in the Windows security prompt window.
Step 8: Next, click “Finish” to complete installation.
That’s it. Now you have successfully finished installing ADB driver in your computer. If you encounter any issues while following this tutorial, do let me know via comments.
Note: If you have corrupted your Samsung SM-J330G, download Samsung SM-J330G stock ROM and flash it on your device to get it back to a working condition easily.
If you are an owner of Samsung SM-J320F and searching for the USB drivers for your device, then you have landed on the right page. Download Samsung SM-J320F USB driver from here, install it on your computer and connect your device with PC or Laptop successfully.
Here, we have provided two USB drivers for your Samsung SM-J320F.
Download Samsung SM-J320F USB Driver
USB Driver Type: Samsung Driver
USB Driver Purpose: For flashing Stock firmware on your device.
File Size: 9 MB
USB Driver Type: ADB Driver
USB Driver Purpose: For connecting your device to a computer.
File Size: 8.3 MB
Steps To Install Samsung SM-J320F Samsung Driver In Computer
Video Tutorial
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download the Samsung driver and extract it on your desktop.
Step 2: Once extracted, you will see Samsung driver setup file. Click on it to launch the Installation Wizard window where you will have to choose the required language and your country.
Step 3: Now choose the destination folder (which is usually C:\Program Files\Samsung\USB Drivers) using the Browse button. Once done, click “Install” in the installation wizard window.
Step 4: Next, you will see the Installation Status Window. Now you will have to wait until the Window closes.
Step 5: Once the installation is finished, click “Finish” to close the installation wizard.
That’s it. Your Samsung device driver is now successfully installed on your computer.
Steps To Install Samsung SM-J320F ADB Driver In Computer
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download the driver and extract it on your desktop.
Step 2: Now, open Device Manager > Action > Add legacy hardware.
Step 3: Next, click “Next” in the Add legacy hardware wizard.
Step 4: Now choose “Install the hardware that I manually select from the list (Advanced)” and click “Next“.
Step 5: Once done choose “Show all devices“, click “Next” and select the extracted file manually from your computer.
Step 6: Now to start installing your new hardware, click “Next” again.
Step 7: Click “Install” in the Windows security prompt window.
Step 8: Next, click “Finish” to complete installation.
That’s it. Now you have successfully finished installing ADB driver in your computer. If you encounter any issues while following this tutorial, do let me know via comments.
Note: If you have corrupted your Samsung SM-J320F, download Samsung SM-J320F stock ROM and flash it on your device using an Android flash tool.
Download Newest SAMSUNG J330 Galaxy J3 2017 Drivers
Would you like to transfer data between SAMSUNG and computer? Does your SAMSUNG J330 Galaxy J3 2017 getting a problem during connection to Windows PC? Do you want to update SAMSUNG J330 Galaxy J3 2017 by computer to the latest version of Android? Are you looking for the SAMSUNG J330 Galaxy J3 2017 newest drivers?
We have great information especially for SAMSUNG users! You have an opportunity to connect your SAMSUNG phone for development environment by downloading USB drivers, which allows you to ease communication between your SAMSUNG J330 Galaxy J3 2017 and PC. Official USB drivers from 2022 will give you a possibility to transfer data between a device and the computer. This amazingly useful connection is creating many possibilities for example update phone by computer, transfer documents, files, videos, photos, and more personal stuff or flash band stock firmware. Let's download the latest version of SAMSUNG drivers by using our free link. Download SAMSUNG J330 Galaxy J3 2017 Drivers
The SAMSUNG USB drivers installation files will be compatible with Android 7.0 Nougat system and older OS. All SAMSUNG J330 Galaxy J3 2017 introduced 2017 and powered by Samsung Exynos 7570 will work with those drivers. So let's follow our instructions to use SAMSUNG J330 Galaxy J3 2017 USB connection. The last SAMSUNG J330 Galaxy J3 2017 drivers are compatible with Windows 10, Windows 8 and Windows 7.
Read the step by step instruction to successfully perform installation of SAMSUNG J330 Galaxy J3 2017 USB drivers.Drivers Installation Guide
If you need to use SAMSUNG J330 Galaxy J3 2017 ADB Connection use the ADB drivers installaton files.Mini ADB & Fastboot Drivers
> > Drivers Download
If you found this helpful, click on the Google Star, Like it on Facebook or follow us on Twitter and Instagram
Читайте также: