Автокад ошибка no function definition ai draworder
You saw an error containing the text No function definition.
You may have received one of several possible No function definition errors. The exact ones we've chronicled are listed in the Solution below.
Cause
A No function definition error is the result of a function within the software that can't be completed (in other words, it's not defined). The solution will depend on the function that's not being defined.
Solution
Step 1: Restart your computer.
Simply restarting can sometimes clear up the error. Try opening CAD after restarting. If you don't see a No function definition error, you've resolved the issue.
Still seeing a No function definition error after restarting your computer? Move on to the specific error message troubleshooting steps below.
Step 2 (if necessary): Troubleshoot your specific No function definition error message.
If restarting your computer didn't resolve the error, your solution will depend on the exact text within the No function definition error you're seeing:
This error is the result of custom civil engineering objects that the Canadian firm GHD attaches to its drawings. This practice allows GHD to implement precautions such as preventing users from deleting or moving critical utilities. However, this method of adding this functionality does not follow programming best practices, and essentially makes the file unusable by other firms.
Complete the following steps to clean these custom objects.
1. Open the CAD Options dialog box by typing Options or Op in the Command line and pressing Enter.
2. In the Options dialog box, select the Open and Save Tab. Then set the Demand load ObjectARX apps menu to Command invoke.
3. Open the problematic file.
4. Copy and paste the following text into the Command line, making sure to include all the parentheses:
(dictremove (namedobjdict) "VL-REACTORS")
5. Press Enter.
6. Immediately run our Nuke tool on the file.
The reactor should now be removed from the file, and you can work with it as you would normally.
If you received any of these three no function definition errors, your AutoCAD installation is likely configured improperly. The exact cause of these errors is unknown, although they may result from having multiple versions of AutoCAD on your computer.
To resolve the issue:
1. Download the zip file linked below.
Download the file to a location where you can easily find it, such as your desktop.
2. Locate and double-click the downloaded file vlax-ename fix.reg.zip.
3. You'll now see the Registry Editor warning message pictured to the right. Click Yes.
We are the source of the information referenced in the message, and yes, you can trust us.
4. You'll now have a file named vlax-ename fix.reg in that same location. Double-click this file.
5. Restart CAD.
6. Attempt the same action that generated the error. If you don't see the error, you've resolved the issue.
Still getting the error? Move on to the next step.
7. Check whether you have multiple versions of AutoCAD or F/X CAD installed. If you have an older version installed, follow our steps to uninstall that version. Do not reinstall that older version.
8. Once you're sure you only have one version of AutoCAD or F/X CAD (the version you want to use) installed, follow our steps to reinstall that version.
For example, if you got the error while trying to use F/X CAD 2018, repair F/X CAD 2018 after removing any older versions.
Problems installing? You may need to disable your antivirus software temporarily while installing AutoCAD or F/X CAD. Don't forget to enable it once the installer finishes.
AutoCAD includes myriad add-on libraries. If you're curious, take a look in the folder C:/Program Files/Autocad on your computer. The error may be a result of a problem with one of the following files in that folder: vlreac.dll, vllib.dll, or vlcom.dll.We have been unable to resolve this issue by copying these files over, and these files are not self-registering DLL files, which leaves reinstalling as the only viable solution.
This error is the result of a problem with the OpenDCL function. You can easily resolve it by following our steps to reinstall OpenDCL.
There's never a dull moment .
For some reason whenever I want to move entities in front of or behind
other entities I now receive the following error message " Error: no
function definition: AI_DRAWORDER"
Any ideas . worked ok before ?
Post by Bernard Rother
There's never a dull moment .
For some reason whenever I want to move entities in front of or behind
other entities I now receive the following error message " Error: no
function definition: AI_DRAWORDER"
Any ideas . worked ok before ?
Thanks, Bernard.
Post by Bernard Rother
There's never a dull moment .
For some reason whenever I want to move entities in front of or behind
other entities I now receive the following error message " Error: no
function definition: AI_DRAWORDER"
Any ideas . worked ok before ?
Thanks, Bernard.
It might have something to do with how you are issuing it. Are you doing it
from a button or a menu? What's your text screen say?
At the command line, "ai_draworder" by itself wont work, but
"(ai_draworder "_b")" works and send to back.
"(ai_draworder "_f")" sends to front
"(ai_draworder "_u")" send it under, and
"(ai_draworder "_a")" sends it above
At the command line, you have to issue the command "DRAWORDER".
Post by Bernard Rother
There's never a dull moment .
For some reason whenever I want to move entities in front of or behind
other entities I now receive the following error message " Error: no
function definition: AI_DRAWORDER"
Any ideas . worked ok before ?
Thanks, Bernard.
It might have something to do with how you are issuing it. Are you doing it
from a button or a menu? What's your text screen say?
At the command line, "ai_draworder" by itself wont work, but
"(ai_draworder "_b")" works and send to back.
"(ai_draworder "_f")" sends to front
"(ai_draworder "_u")" send it under, and
"(ai_draworder "_a")" sends it above
At the command line, you have to issue the command "DRAWORDER".
I'm using it from the toolbar. I just used to pick a button for the draw
order I required and picked the elements. Now for some reason the
toolbar buttons are working. I'm guessing I may have to load ( appload ?
) something to get them going again.
If I do what you suggest above, I receive "no function definition:
AI_DRAWORDER"
Really wierd.
Post by Bernard Rother
There's never a dull moment .
For some reason whenever I want to move entities in front of or behind
other entities I now receive the following error message " Error: no
function definition: AI_DRAWORDER"
Any ideas . worked ok before ?
Thanks, Bernard.
It might have something to do with how you are issuing it. Are you doing it
from a button or a menu? What's your text screen say?
At the command line, "ai_draworder" by itself wont work, but
"(ai_draworder "_b")" works and send to back.
"(ai_draworder "_f")" sends to front
"(ai_draworder "_u")" send it under, and
"(ai_draworder "_a")" sends it above
At the command line, you have to issue the command "DRAWORDER".
I'm using it from the toolbar. I just used to pick a button for the draw
order I required and picked the elements. Now for some reason the
toolbar buttons are working. I'm guessing I may have to load ( appload ?
) something to get them going again.
AI_DRAWORDER"
Really wierd.- Hide quoted text -
- Show quoted text -
and choose your product, then go to the Data and Downloads link on the
left.
If your product is patched and up to date then you have a corrupt
installation. You could try a repair and if that doesn't work you will
have to do a clean uninstall and reinstall.
Post by Bernard Rother
There's never a dull moment .
For some reason whenever I want to move entities in front of or
behind other entities I now receive the following error message "
Error: no function definition: AI_DRAWORDER"
Any ideas . worked ok before ?
Thanks, Bernard.
It might have something to do with how you are issuing it. Are you
doing it from a button or a menu? What's your text screen say?
At the command line, "ai_draworder" by itself wont work, but
"(ai_draworder "_b")" works and send to back.
"(ai_draworder "_f")" sends to front
"(ai_draworder "_u")" send it under, and
"(ai_draworder "_a")" sends it above
At the command line, you have to issue the command "DRAWORDER".
I'm using it from the toolbar. I just used to pick a button for the
draw order I required and picked the elements. Now for some reason the
toolbar buttons are working. I'm guessing I may have to load (
appload ? ) something to get them going again.
AI_DRAWORDER"
Really wierd.
Post by Bernard Rother
There's never a dull moment .
For some reason whenever I want to move entities in front of or
behind other entities I now receive the following error message "
Error: no function definition: AI_DRAWORDER"
Any ideas . worked ok before ?
Thanks, Bernard.
It might have something to do with how you are issuing it. Are you
doing it from a button or a menu? What's your text screen say?
At the command line, "ai_draworder" by itself wont work, but
"(ai_draworder "_b")" works and send to back.
"(ai_draworder "_f")" sends to front
"(ai_draworder "_u")" send it under, and
"(ai_draworder "_a")" sends it above
At the command line, you have to issue the command "DRAWORDER".
I'm using it from the toolbar. I just used to pick a button for the
draw order I required and picked the elements. Now for some reason the
toolbar buttons are *NOT* working. I'm guessing I may have to load (
appload ? ) something to get them going again.
AI_DRAWORDER"
Really wierd.
Sorry Mike, should have been ". toolbar buttons are *NOT* working." It
worked not so long ago so it looks as though I may have to reinstall
it as suggested by a sakoguy. I had done a scan and imported the vectors
so as to trace over them after sending them "below" my new drawing. Oh
well, something to keep me busy over the weekend.
Thanks for all the suggestions.
Bernard.
Post by Bernard Rother
There's never a dull moment .
For some reason whenever I want to move entities in front of or
behind other entities I now receive the following error message "
Error: no function definition: AI_DRAWORDER"
Any ideas . worked ok before ?
Thanks, Bernard.
It might have something to do with how you are issuing it. Are you
doing it from a button or a menu? What's your text screen say?
At the command line, "ai_draworder" by itself wont work, but
"(ai_draworder "_b")" works and send to back.
"(ai_draworder "_f")" sends to front
"(ai_draworder "_u")" send it under, and
"(ai_draworder "_a")" sends it above
At the command line, you have to issue the command "DRAWORDER".
I'm using it from the toolbar. I just used to pick a button for the
draw order I required and picked the elements. Now for some reason the
toolbar buttons are *NOT* working. I'm guessing I may have to load (
appload ? ) something to get them going again.
AI_DRAWORDER"
Really wierd.
Sorry Mike, should have been ". toolbar buttons are *NOT* working." It
worked not so long ago so it looks as though I may have to reinstall
it as suggested by a sakoguy. I had done a scan and imported the vectors
so as to trace over them after sending them "below" my new drawing. Oh
well, something to keep me busy over the weekend.
Thanks for all the suggestions.
Bernard.- Hide quoted text -
- Show quoted text -
By clean uninstall/reinstall I mean the procedure in the following
document.
Removing all Autodesk products and all the files, folders, and
regisrty entries detailed in the document is the only way to get a
truly clean uninstall/reinstall.
After reinstalling you should make sure you install the appropriate
service packs and patches.
I worked as an Autodesk product support engineer for a year and that
is the method suggested by Autodesk.
Active Member Join Date 2001-05 Location Carthage, MO Posts 76
error: no function definition: AI_DRAWORDER
I keep getting this error, can anyone else repeat it. All I'm trying to do is send an item to the back. **ADDED** I only get this when using the pull down or right click menu.
The Silent Type Join Date 2000-11 Posts 13,656
Originally Posted by esdeyo
I keep getting this error, can anyone else repeat it. All I'm trying to do is send an item to the back. **ADDED** I only get this when using the pull down or right click menu.
If you type the following at the AutoCAD Command Line, does draworder work ok! ?
When you receive the message "error: no function definition: AI_DRAWORDER" check and see if "acdorder.arx" is loaded.
Have a good one, Mike
Active Member Join Date 2001-05 Location Carthage, MO Posts 76
Originally Posted by Mike.Perry
If you type the following at the AutoCAD Command Line, does draworder work ok! ?
When you receive the message "error: no function definition: AI_DRAWORDER" check and see if "acdorder.arx" is loaded.
Have a good one, Mike
Typing the command works just fine. I have been in contact with autodesk & they had me repair my installation, they think its a acad.mnl error. It still doesn't work for me.
The Silent Type Join Date 2000-11 Posts 13,656
Originally Posted by esdeyo
I have been in contact with autodesk & they had me repair my installation, they think its a acad.mnl error. It still doesn't work for me.
The following thread on the Autodesk Discussion Groups also points to acad.mnl being the cause of the problem.
Basically, the above thread points to making sure acad.mnl is somewhere within your AutoCAD Support Search Path.
Have a good one, Mike
The Silent Type Join Date 2000-01 Location Seattle WA USA Posts 5,859
Member Join Date 2007-03 Posts 3
Has the cure been found? I am having the same problem. Draworder from the drop down menu or from the draworder menubar causes the "error: no function definition: AI_DRAWORDER" error.
Member Join Date 2016-01 Location Hants / Wilts Border Posts 25
I'm not sure whether this is the answer but I have had similar problems with other commands and I traced it back to our corruption of my profile created by our corporate menus
To test the theory without loosings all your settings if it isn't the problem go to tools, options then the profile tab. Export your profile saving it as a different name to the one you are using then import is back in, effectively making a copy. Set the copy current then reset it.
If that doesn't cure the problem then delete the test profile and go back to the original one with all your setting still intact.
There's never a dull moment .
For some reason whenever I want to move entities in front of or behind
other entities I now receive the following error message " Error: no
function definition: AI_DRAWORDER"
Any ideas . worked ok before ?
S. Smith
Michael Bulatovich
It might have something to do with how you are issuing it. Are you doing it
from a button or a menu? What's your text screen say?
At the command line, "ai_draworder" by itself wont work, but
"(ai_draworder "_b")" works and send to back.
"(ai_draworder "_f")" sends to front
"(ai_draworder "_u")" send it under, and
"(ai_draworder "_a")" sends it above
At the command line, you have to issue the command "DRAWORDER".
--
Bernard Rother
I'm using it from the toolbar. I just used to pick a button for the draw
order I required and picked the elements. Now for some reason the
toolbar buttons are working. I'm guessing I may have to load ( appload ?
) something to get them going again.
If I do what you suggest above, I receive "no function definition:
AI_DRAWORDER"
Really wierd.
sakoguy
On Mar 5, 2:32 am, Bernard Rother
wrote:
> Michael Bulatovich wrote:
> > "Bernard Rother" wrote in message
and choose your product, then go to the Data and Downloads link on the
left.
If your product is patched and up to date then you have a corrupt
installation. You could try a repair and if that doesn't work you will
have to do a clean uninstall and reinstall.
Michael Bulatovich
So it's WORKING now?
Bernard Rother
Michael Bulatovich wrote:
> Bernard Rother wrote:
>> Michael Bulatovich wrote:
>>> "Bernard Rother" wrote in message
>>> news:Sv-dnWoA5KqcgVDa. @saix.net.
>>>> There's never a dull moment .
>>>> For some reason whenever I want to move entities in front of or
>>>> behind other entities I now receive the following error message "
>>>> Error: no function definition: AI_DRAWORDER"
>>>> Any ideas . worked ok before ?
>>>>
>>>> Thanks, Bernard.
>>> It might have something to do with how you are issuing it. Are you
>>> doing it from a button or a menu? What's your text screen say?
>>>
>>> At the command line, "ai_draworder" by itself wont work, but
>>> "(ai_draworder "_b")" works and send to back.
>>> "(ai_draworder "_f")" sends to front
>>> "(ai_draworder "_u")" send it under, and
>>> "(ai_draworder "_a")" sends it above
>>>
>>> At the command line, you have to issue the command "DRAWORDER".
>> I'm using it from the toolbar. I just used to pick a button for the
>> draw order I required and picked the elements. Now for some reason the
>> appload ? ) something to get them going again.
>> If I do what you suggest above, I receive "no function definition:
>> AI_DRAWORDER"
>> Really wierd.
>
> So it's WORKING now?
>
>
Sorry Mike, should have been ". toolbar buttons are *NOT* working." It
worked not so long ago so it looks as though I may have to reinstall
it as suggested by a sakoguy. I had done a scan and imported the vectors
so as to trace over them after sending them "below" my new drawing. Oh
well, something to keep me busy over the weekend.
Thanks for all the suggestions.
Bernard.
Если вы получили ответ на вопрос и хотите поддержать проект материально - внизу страницы есть специальная формы для перечисления пожертвований через PayPal, Яндекс.Деньги и пр. Также можно воспользоваться этой ссылкой или этой ссылкой.
Доброе утро, Андрей!
Если Вы работаете в программе ТЕКЛА.
Можно Вам задать вопросы по работе в программе ТЕКЛА?
Если нет, то могли бы кого то посоветовать?
С Уважением, Э.З.Керимов.
Андрей, здравствуйте.
Прочитал статью по настройке интерфейса 2015. У меня остался один вопрос. Можете подсказать как отключить появление панели "Несколько объектов" в ленте при выборе нескольких объектов. Раньше в версии 2011 эта функция убиралась в настройках "Выбор" в параметрах программы.Сейчас я ее никак найти не могу.
Буду благодарен за помощь.
Заранее спасибо.
Ответ:
Добрый день!
Установите переменную SELECTIONCYCLING = 0.
Или на статусной панели отключите кнопку Циклический выбор
Ответ:
Добрый день, Владимир!
К сожалению, с динамическими блоками эти фокусы не проходят
Здравствуйте. После удаления SIVIL 3d программой Unins Tool не работает все прог AUTOdesk.Подскажите .Спасибо
Внимательно читаю все ваши статьи в блоге об Autocad. Собственно поэтому и решил, что вы сможете дать мне ответ. Проблема в следующем: версии с 13-ой, при переходе в 3д моделирование, перекрестие становится не ортогональным экрану (как обычно в 2д модели), а ложится в плосткость X-Y. Хотя сама рамка выбора растягивается ортогонально экрану. Нет ли переменной или команды, которая бы это исправляла?
Здравствуйте, у меня проблема с подключением лицензии автокада и инвентора 2017 на вин10, сам автодеск не может подключится к сети, хотя интернет есть, что мне можно сделать?
Здраствуйте! А не подскажете через объектную модель ActiveX нельзя работать с быстрым выбором?
Например произвести аналог выбора:
Применить > Ко всему чертежу, Тип объектов > Несколько, Свойства > Цвет, Оператор > = Равно, Значение > Зеленый
Здравствуйте!
Спасибо за Ваш блок!
Хочу освоить проектирование изделий в инвертор, подскажите видео курсы хорошие.
На примере обучения автокад использовал курсы Меркулова, очень хороший результат после прохождения. Но он не учит в инвентаре.
Буду рад ответу.
Подскажите если можно вот что.Автокад упорно пишет,что я использую не сертифицированное оборудование.Пробовал разные версии драйвера.И с сайта самого Автокада (331.82) и с сайта Нвидиа (376 и 378).Толку ноль.
Автокад 2014,карта Quadro k2000
Ответ:
ОС какая?
Ответ:
Нет, только руками с помощью отрезка, блока или любого другого подходящего инструмента
Андрей, добрый день! Подскажите, пожалуйста, если возможно. Не могу найти ни папку с Express Tools, ни файлы acettest.fas, leaderex.arx и ctextapp.arx. Спасибо заранее!
Ответ:
Добрый день! По-умолчанию все инструменты Express Tools лежат в папке Express в каталоге установки C:\Program Files\Autodesk\AutoCAD 2015\express
Здравствуйте. При масштабировании чертежа Autocad ухудшает качество графики - "Для оптимизации производительности параметр создания геометрии в высоком качестве временно отключён". Проблема в том, что после этого и качество ухудшается, и тормозить начинает сильнее. Подскажите, можно ли как-то отключить это отключение создания геометрии в высоком качестве?
Ответ:
Добрый день! Нет, нельзя. У вас либо встроенная, либо очень простая видеокарта, не совместимая с AutoCAD. Попробуйте обновить драйвер, желательно поставить совместимый с AutoCAD
Õîëîäèëüíàÿ ìàøèíà - это то самое наречие, на котором отображается весь текст в чертеже. Есть алгоритм перевода, который можно применить ко всем надписям одновременно. Заранее спасибо.
Добрый вечер! Андрей. Недавно перешел на инвентор . Делаю параметрическую корзину.Корзина состоит из рамы и полукруглой сетки,которая крепиться к раме .Ячейка сетки 25х25 (диам.1 мм-прутка). Возникли вопросы:
1.По дуге построил массив ( перпендикулярный дуге ) , но не знаю как прописать в параметрах , чтобы строился массв сам ?
2. Днище корзины тоже закрывается сеткой и сетка выходит за пределы дуги при использовании массива , помогите решить вопрос ? Могу переслать скрин корзины . Спасибо.
Ответ:
Добрый день, Виталий!
По первому вопросу непонятно, что именно вы хотите прописать. Шаг и кол-во экземпляров? В параметрах создайте такие переменные и при создании массивов укажите их вместо числовых значений.
Здравствуйте, Андрей! Хочу вернуть статусной строке в Акаде17 прежний вид (не значки, а слова) и не могу. Подскажите, есть ли возможность как-то решить задачу
Ответ:
Добрый день! К сожалению, такой возможности нет
Андрей , добрый вечер спасибо за ролик , помогло . Теперь хотел у вас поинтересоваться как можно купить определенные уроки Инвентора . Меня интересует сборка трубопроводов ( где всегда присутствует запорная арматура , отводы ,тройники ,трубы) . Задача собирать их как можно быстрее ,менять диаметры трубопроводов , подбирать нужное давление , может поможет "айлоджик". Что вы скажете ? Спасибо.
Ответ:
Модулем построения трубопроводов в Inventor не пользуюсь. Если что-то встречу в сети, скину вам ссылку
Открываю JPEG изображение через Paint, выделяю его (Ctrl+A), копирую (Ctrl+C), вставляю в Автокад 2016 (Ctrl+V). Получаю OLE объект, сохраняю файл, закрываю и сразу же открываю его, но OLE объекта уже нет. Подскажите почему OLE объект пропадает, или как вставить в автокад изображение (например печать в формате JPEG), чтоб не таскать картинку за файлом.
Ответ:
Никак, таскать все равно придется. Кладете картинку в одну папку с dwg-файлом, вставляете командой Присоединить или ИЗОБВСТАВИТЬ, устанавливаете относительный путь. Если вдруг потеряете ссылку, то через диспетчер внешних ссылок всегда можно восстановить
Здравствуйте. Видеокарта AMD R9 270. Какие драйвера нужно устанавливать для совместимости с Автокадом? В 2д вроде нормально, но в 3д при применении просвечивания и скрытых линий начинаются глюки. +Постоянно выскакивает уведомление, что производительность 3д отображения недоступна, и нигде не найду как его отключить.
Ответ:
Добрый день! Отключить командой ГРАФИКАНАСТР, на счет драйверов - пробовать разные. Т.к. AMD R9 270 это перелицованная Radeon 7000, то искать в эту сторону
День добрый! Формирую таблицы спецификаций в экселе – потом всталяю в автокад – проблема в том что все целые значения отделены точками, а не запятыми. Как решить проблему?
Ответ:
Добрый день! Единственный способ - поменять разделитель в операционной системе.
Еще один вопрос нескромный – если у меня в таблицах «Ексель» две длины 0,9км – 900м, 0,89 км – 890 км – как сделать так чтоб количество знаков было одинаково после запятой, при том чтоб целая часть оставалась без записи – допустим в штуках что то считается – 5шт. – чтоб не появлялось 5,00 шт.?
Ответ:
В AutoCAD штатными средствами этого не сделать, в Excel можно округлять командой ОКРУГЛ и ОКРУГЛВВЕРХ
каким образом в автокаде настроить чтоб из таблицы Экселя брались значения как текст? А в экселе можно было кодить формулы
Ответ:
В Excel готовую таблицу копируете, вставляете в режиме только значения, далее уже ее в AutoCAD
не могу после двух щелчков ЛКМ изменять текст, не удаляются не текст ни чертежи, также не переносятся. В чем может быть причина?
Ответ:
Установите значения переменных DBLCLKEDIT = 1 и PICKFIRST = 1
здравствуйте!
закрыл автокад не сохранив чертеж, можно ли восстановить полностью несохраненный чертеж? нашел файл .bak но там чертеж в таком же виде каком и была.
Ответ:
Добрый день! К сожалению нет. Единственная надежда - BAK-файл.
Ответ:
Это на каком языке?
Ответ:
Добрый день! AutoCAD 2015 не поддерживает Windows 10, поэтому его корректная работа на этой операционной системе не гарантируется. Перейдите на более новую версию (Windows 10 поддерживается начиная с AutoCAD 2016 SP1)
При создании массива в динамическом блоке элменты массива теряют динамические свойства. Есть ли возможность сохранить динамические свойства для элементов массива?
Ответ:
Нет, этого сделать нельзя
Подскажите пожалуйста! в автокаде 15 перестала работать кнопка draworder. а еще при вставке растрового изображения раньше можно было вырезать контур полилинией, а теперь эта команда пропала
Заключение
Еще раз хочу напомнить всем, что я отвечаю далеко не на все вопросы, а лишь на те, на которые знаю ответ или для поиска вменяемого ответа не требуется много времени. Если вы от меня не получили ответ, то спросите на форуме
Если вы получили ответ на свой вопрос и хотите поддержать проект материально - внизу страницы для этого есть специальная форма.
Читайте также: