0x8004011c outlook неизвестная ошибка
Многие пользователи Windows видят код ошибки 0x8004011D при попытке обновить свою электронную почту в Outlook или при отправке / получении электронной почты. Сообщается, что эта проблема возникает в каждой последней версии Windows (Windows 7, Windows 8.1 и Windows 10) и, по-видимому, не зависит от используемой версии Outlook.
В большинстве случаев эта проблема возникает из-за проблемы сервера Exchange, которая возникает только временно. В этом случае вы, вероятно, сможете избежать любых возможных ошибок 0x8004011D в будущем, включив режим кэширования в автономных настройках Exchange.
Некоторым пользователям удалось решить эту проблему, создав новый профиль электронной почты для использования с Outlook. Это не идеально, поскольку вы потеряете некоторые данные, прикрепленные к вашей электронной почте, которые хранятся локально, но впоследствии вы сможете восстановить их, синхронизировавшись с почтовым клиентом.
Если вы видите ошибку 0x8004011D только при подключенной SD-карте, возможно, вы имеете дело с заражением вредоносным ПО, вызванным вирусом, который любит находиться в корневых папках SD-карт и флэш-накопителей (jutched.exe). В этом случае перевод компьютера в безопасный режим с подключением к сети и запуск утилиты безопасного сканирования должен решить эту проблему.
Включение режима кэширования Exchange
Если вы сталкиваетесь с ошибкой 0x8004011D с учетной записью Microsoft Exchange, вы можете решить эту проблему, заставив Outlook использовать режим кэширования Exchange и посмотреть, позволяет ли это нормально подключаться к серверу Exchange.
Примечание. Прежде чем сделать это, важно убедиться, что вы используете последнюю версию программы Outlook, которая вызывает у вас этот код ошибки.
Если вы подтвердите, что используете последнюю версию Outlook, следуйте приведенным ниже инструкциям, чтобы включить использование режима кэширования Exchange через окно настройки учетной записи пользователя.
Вот краткое руководство, которое покажет вам, как включить «Режим кэширования Exchange» для уязвимой учетной записи Outlook:
- Перво-наперво, запустите Outlook и все связанные экземпляры.
- Затем нажмите клавишу Windows + R, чтобы открыть диалоговое окно «Выполнить». Внутри текстового поля введите «control.exe» и нажмите Enter, чтобы открыть классический интерфейс панели управления.Открытие панели управления
- В окне панели управления нажмите «Почта» в списке доступных параметров или воспользуйтесь функцией поиска (в верхнем правом углу), чтобы сузить список элементов.Открытие приложения Почта
- Как только вы окажетесь на экране настройки почты, нажмите кнопку учетной записи электронной почты, связанную с учетными записями электронной почты.Доступ к меню учетных записей электронной почты
- В меню «Настройки учетных записей» выберите вкладку «Электронная почта», затем дважды щелкните учетную запись Exchange, которую вы используете в данный момент.Доступ к учетной записи электронной почты, которая в данный момент активна
- Как только вы окажетесь в меню настроек, связанных с вашей учетной записью электронной почты, прокрутите вниз до раздела «Автономные настройки» и установите флажок, связанный с режимом использования кэшированного обмена.Включение режима кэширования Exchange
Примечание. Если режим кэширования Exchange уже включен, отключите эту опцию и продолжайте выполнять следующие шаги. Если проблема не устранена, перепроектируйте шаги, чтобы включить ее снова.
Если проблема все еще не решена, перейдите к следующему потенциальному решению ниже.
Создание нового профиля Outlook
Несколько затронутых пользователей подтвердили, что его работа, наконец, позволила им нормально использовать свою программу Outlook, не обнаруживая ошибки всякий раз, когда они пытались синхронизировать приложение.
ВАЖНО! Если вы заранее не создадите резервную копию файла .PST / .OST, вы потеряете все данные Outlook, которые хранятся локально, выполнив следующие действия.
Вот краткое руководство, которое покажет вам, как удалить текущий профиль Outlook и создать новый с нуля, чтобы устранить ошибку 0x8004011D:
- Начните с закрытия Outlook и любых связанных служб.
- Затем нажмите клавиши Windows + R, чтобы открыть диалоговое окно «Выполнить». Затем введите «control.exe» и нажмите Enter, чтобы открыть окно «Классическая панель управления».Доступ к интерфейсу классической панели управления
- Как только вы окажетесь внутри классического интерфейса панели управления, используйте кнопку поиска (в верхнем правом углу), чтобы найти «почту». Далее из списка результатов нажмите на Почту.Открытие приложения Почта
- В главном окне Mail Setup нажмите кнопку Показать профили, связанные с профилями.Доступ к меню профилей
- Зайдя в окно «Почта», выберите профиль Outlook, который вы активно используете, и нажмите кнопку «Удалить», чтобы избавиться от него.Удаление вашего профиля электронной почты Outlook
Примечание. Перед этим сделайте резервную копию файла .PST или .OST, чтобы избежать полной потери данных.
Запуск сканирования на вредоносное ПО в безопасном режиме
Как выясняется, этой проблеме также может способствовать некое вредоносное ПО, обнаруженное в вашей системе. В большинстве случаев затронутые пользователи сообщали, что проблема была вызвана вирусом (jutched.exe), который хранился на SD-карте.
Вот краткое пошаговое руководство по удалению вредоносного ПО, которое может вызывать ошибку Outlook:
-
Подключите SD-карту к компьютеру, на котором вы столкнулись с проблемой, и отформатируйте диск, щелкнув правой кнопкой мыши диск и выбрав «Формат» в появившемся контекстном меню.Форматирование SD-карты
Примечание. Если у вас есть какие-либо важные данные на SD-карте, сделайте резервную копию перед началом этой процедуры. Но не копируйте никакие корневые файлы (только содержимое папки с изображениями / видео, которую вы хотите не потерять).
Примечание. Если у вас есть время, вам следует рассмотреть возможность использования полного формата (сняв флажок «Быстрое форматирование»), но это не обязательно.
Примечание. Загрузка в безопасном режиме с поддержкой сети крайне важна, поскольку для загрузки и развертывания утилиты Windows Safety Scanner вам потребуется доступ в Интернет.
Примечание. Убедитесь, что вы загружаете правильную битовую версию в соответствии с архитектурой вашей ОС.
Если это не помогло, вам также следует рассмотреть возможность глубокого сканирования с помощью Malwarebytes.
Если ошибка 0x8004011D сохраняется, перейдите к следующему потенциальному исправлению ниже.
Разрешение двух учетных записей Exchange в одной установке Outlook
Как оказалось, эта проблема может возникнуть в ситуациях, когда у пользователя есть 2 учетные записи Microsoft Exchange, подключенные через одну и ту же установку Outlook. Эта проблема, кажется, ограничена более старыми версиями Outlook (старше, чем Outlook 2013).
Вот краткое пошаговое руководство о том, как это сделать:
-
Нажмите клавишу Windows + R, чтобы открыть диалоговое окно «Выполнить». Затем введите «regedit» в текстовом поле и нажмите Enter, чтобы открыть редактор реестра.Открыть Regedit
Примечание. Если вы получите приглашение UAC (Контроль учетных записей), нажмите Да, чтобы предоставить административные привилегии.
Примечание. Вы можете либо попасть туда вручную, либо вставить весь путь непосредственно в панель навигации и нажать клавишу «Ввод», чтобы сразу попасть туда.
Примечание. Если значение MaximumAllowedSessionsPerUser уже существует, пропустите этот шаг.
When I setup a IMAP email account in MS outlook 2016 in a Win 10 pro workstation, I got a error msg: An unknown error occurred, error code: 0x8004011c.
It is our first MS office 2016 and win 10 pro computer. What should I do? Thanks for any suggestions.
Popular Topics in Windows 10
Finally found a solution:
This problem happens only for a domain account (We use samba, win 10 and outlook 2016). The solution gives in
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Protect\Providers\df9d8cd0-1501-11d1-8c7a-00c04fc297eb]
-> Add this key "ProtectionPolicy"=dword:00000001
The above register key solved my problem. Hope it is useful for others.
9 Replies
In these kind of situations, I'd always suggest downloading MalwareBytes and running it on the machine. you can use SuperAntiSpyware if you prefer, but I would ensure the machine is clean by running one of those tools before we actually look further as normally it's a bit of malware/spyware (whatever you want to call it) causing your problems.
Run one of those, reboot the machine, check it's Windows Updates are complete and then lets go from there
Thank Flatpack. But in my opinion, it is not a virus issue. It should be a problem caused by MS office 2016 or windows 10. Our computer is brand new computer.
Hope more suggestions.
Da_Schmoo
Running a repair is always the first step.
Thank Da_Schmoo. Full repair doesn't solve this issue.
OK, I get it's a new computer, but is it a new user ?
If it was a config problem, you'd see it across your network.
Anyway, why are you using IMAP with Office ? Why are you using Exchange ?
Finally found a solution:
This problem happens only for a domain account (We use samba, win 10 and outlook 2016). The solution gives in
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Protect\Providers\df9d8cd0-1501-11d1-8c7a-00c04fc297eb]
-> Add this key "ProtectionPolicy"=dword:00000001
The above register key solved my problem. Hope it is useful for others.
Thanks Craigliu. This worked like a charm! Im using ClearOS Domain, Win10, Office 2016
craigliu, you are awesome. That solved my issue. Office 2013 on win10. I had completely run out of options, then found your thread. THANKYOU :-)
Made sure Office was up to date then ran a quick repair. This sorted it out for me.
This topic has been locked by an administrator and is no longer open for commenting.
To continue this discussion, please ask a new question.
Spark! Pro Series - 10 May 2022
Today in History: 10 May1291 - Scottish nobles recognize authority of English King Edward I1497 - Italian navigator Amerigo Vespucci leaves for his first voyage to the new world (disputed)1534 - French navigator Jacques Cartier reaches Newfoundland176.
Snap! BIG-IP vuln, Lincoln College, instant messaging, Google I/O, & space!
Your daily dose of tech news, in brief. You need to hear this. Hackers are actively exploiting BIG-IP vulnerability with a 9.8 severity rating We spotlighted this last week but it is back in the news. Shortly after F5 released patches for a c.
If you could take an extended break from work, what would you do with the time? Not only that, but how intentional would you be in planning for that break? In part 2 of the interview with Mike Wood we explore the planning and thought processes that went.
And how was your Monday
Had a 3rd party ask me to stop at one of their clients and diagnose a connection issue.The UPS was not connected to anything or even plugged in so I am guessing dead batteries there.The DSL system had been upgraded but they never removed the old DSL modem.
IT staff to Employee Ratio
Hi all, I'm curious to get thoughts on the following: IT staff to employee ratio for help desk types of services Numbers/Types of Back end IT Staff for supporting infrastructure (Is this in addition to helpdesk staff?) The environment I am looking at is a.
I've got an issue with a Windows XP SP3 PC running Outlook 2003 the computer is left on all the time and one morning I came in and Outlook produced the error:
Task "Microsoft Exchange Server" reported error (0x8004011D): "The server is not available. Contact your administrator if this condition persists."
For some reason I can not get outlook to connect to the exchange server. Here's what I've tried:
- connect to owa (works)
- ping the exchange server (works)
- telnet to port 25 on the exchange server (works)
- I can login to any other machine on the network and launch outlook and it connects fine with the same user account.
- I've ran 5 different virus / anti malware scans - they did find some malware and removed them. (microsoft security scan, superantispyware, malwarebytes, spybot search & destroy, eTrust)
- Ran spinrite on the hard drive.
- chkdsk'd the hard drive on a different PC ( when I try to do it on the original machine i receive a "Cannot open volume for direct access" error
- completely uninstalled office with revo uninstaller, deleted the files & registry keys that are left over and reinstalled -- same error
- I've tried extracting the messaging subsystem registry keys from a working pc and importing them into the broken one, but it doesn't resolve the issue.
- ran sfc /scannow
- ran tcpview when launching / trying to sync with outlook (no records of network access from outlook)
- ran wireshark while attempting to sync - no network activity
- tried various outlook command switches /cleanprofile, etc.
- tried deleting my outlook mail profile and having it recreate.
- I've tried cached mode and non-cached mode.
- I've tried toggling the 'Always prompt for user name and password' option
- ran dell diagnostics on the HDD
I think that is about all. I'm running another scan now, and I'm going to try to log in as another user to see if that user can access outlook / exchange when it's finished. Any help / ideas would be greatly appreciated
joejarvis
Popular Topics in Microsoft Office
OP joejarvis
I found it! So here's my resolution. (somewhat)
10 Replies
You said you deleted your outlook mail profile. Did you do that from control panel, or just delete the .ost? I ask because generally when I run into that error, I go to control panel > mail > show profiles, and remove it from there.
Jay6111
Other network activity is fine? Is the IP of this machine static or DHCP? NSLOOKUP on Exchange IP and name return correctly?
Seems to be some sort of glitch in Outlook and Exchange server connection where a particular client will loose all chances of connecting successfully to the server while all other clients continue to work normally.
Try logging off the user (rebooting the computer would be better), restart exchange services if possible right now.
OP joejarvis
Thanks for the responses. I removed the profile from the control panel method. Also when I uninstalled office it removed the control panel icon all together and I went into my user profile and deleted the folders altogether.
I want to say my pc is static because it's the same pc im running the spiceworks server on. But I'll check tomorrow to make sure. I haven't tried an ns lookup but since I can ping / telnet / access the unc path I assume it's ok DNS wise. I've rebooted my pc several times there also is an error message that has been popping up recently regarding a missing ordinal and wsock32.dll or something if I get the error again I'll post it. Also I probably don't have access to restart exchange services. It is a global company and the exchange server I'm connecting to is in Germany. I don't want anything to go wrong on the server side and it be my fault. Anyway since mine is the only computer that is having this issue I'm pretty sure it isn't exchnge.
And I tried a different user account on my PC and I receive the same problem.
OP joejarvis
OK here's an update. The machine is DHCP but it has a reservation on the server. I tried an nslookup and when I did a dialog box came up and it says:
nslookup.exe - Ordinal Not Found
The ordinal 1108 could not be located in the dynamic link library WSOCK32.dll.
However, when I ping it by the server name it resolves to the correct IP and it pings successfully.
I tried to remove the NIC from device manager and let it reinstall but that didn't help.
Following problem: Exchange server 2013 installed on an windows Server 2012. Client connecting with Outlook 2007 and 2010. All users using cached mode because they are out of the office a lot of time. The problem we have is if the user is on the road , sending an recieving mail is not a problem. While they are in the office the outlook client updates the folders and says "Online". When the user sends a message the message is stuck in the outbox. When clicking on send and recive we got an eror "unknow error 0x8004011C" and while transmitting error 0x80040115 for this action the exchange server should be online. but the server is online because the folders are beeing updated. Looking into autodiscovery and so all url's are correct.
Anyone having a tip ?
Answers
I suggest you to to try following cmdlets to change Autodiscover and OutlookAnywhere Authentication. We can set their Authentication method to default type:
1). Set-AutodiscoverVirtualDirectory -Identity 'autodiscover(default Web Site)' -WindowsAuthentication $true -BasicAuthentication $true
2). Set-OutlookAnywhere -Identity:CAS01\rpc (Default Web Site) -IISAuthenticationMethods Basic,NTLM
And we can refer to following blog which although describes Exchange 2007 to get more knowledge:
Hope helpful to you.
Exchange 2013 | Exchange 2010 | Exchange 2007 | Outlook 2013 | Outlook 2010 | Outlook 2007
Finding problems is to make progress & Solving problems is to keep advance
All replies
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
Simon Wu
TechNet Community Support
I suggest you to refer to following post. Although it describes the issue which happens on Exchange 2010. I hope it useful to you:
Sending mail - 0x80040115
We can refer to following article which describes the error "(0x80040115)". And maybe it can give you some ideas:
Hope all above helpful to you.
Exchange 2013 | Exchange 2010 | Exchange 2007 | Outlook 2013 | Outlook 2010 | Outlook 2007
Finding problems is to make progress & Solving problems is to keep advance
Hi Jerry & Simon
Thank you for your quick reply.
From your description "If you use autodiscover it puts logon network security on anonymous authentication and so no encryption between Outlook and Exchange", do you mean "Encrypt data between Microsoft Outlook and Microsoft Exchange" is not checked by defult in your environment?
And Logon Network security type is Anonymous Authentication by default?
As I know, "Encrypt data between. " is selected by defualt and the default Logon network security type is Negotiate Authentication.
Could you please let me know the true situation in your environment?
Exchange 2013 | Exchange 2010 | Exchange 2007 | Outlook 2013 | Outlook 2010 | Outlook 2007
Finding problems is to make progress & Solving problems is to keep advance
I suggest you to to try following cmdlets to change Autodiscover and OutlookAnywhere Authentication. We can set their Authentication method to default type:
1). Set-AutodiscoverVirtualDirectory -Identity 'autodiscover(default Web Site)' -WindowsAuthentication $true -BasicAuthentication $true
2). Set-OutlookAnywhere -Identity:CAS01\rpc (Default Web Site) -IISAuthenticationMethods Basic,NTLM
And we can refer to following blog which although describes Exchange 2007 to get more knowledge:
Hope helpful to you.
Exchange 2013 | Exchange 2010 | Exchange 2007 | Outlook 2013 | Outlook 2010 | Outlook 2007
Finding problems is to make progress & Solving problems is to keep advance
Correct , I think the error is comming from that setting. The customer is now already running the morning without calling us that sending messages doesn't work.
Thank you for your reply.
If so, then I suggest you to try those cmdlets on Exchange server side.
If there is any result or update, please feel free to let me know.
Exchange 2013 | Exchange 2010 | Exchange 2007 | Outlook 2013 | Outlook 2010 | Outlook 2007
Finding problems is to make progress & Solving problems is to keep advance
I have exactly the same problem :(
Fresh Exchange 2013 installation on Windows Server 2012. Two users (only two) of the organization can NOT send emails from their Outlook 2010 SP1 client : messages are stuck in Outbox. But incoming emails are perfectly well received ! Send/receive window only shows 0x8004011C (unknown error) or 0x80040115 (The connection to Microsoft Exchange is unavailable) errors. In the status bar, Outlook says "Connected to Microsoft Exchange" (That's absolutely crazy !). Profile settings : cached mode, encryption enabled, Outlook anywhere enabled (since a direct RPC connection is no longer possible with Exchange 2013), NTLM Authentification. Complete deletion and recreation of Outlook profile does not solve anything. When these users log on to OWA, they can send messages without any problems.
Could anyone help me ?
The Error messages translates to:
> Do you see any change in behavior with the "Outlook online mode"?
Ok, we have EXACT issue also - newly installed Exchange 2013 on a new Server 2012. Small company under 30 users.
Our problem MIRRORS the post above, except it is happening with more than 2 users:
Fresh Exchange 2013 installation on Windows Server 2012. Two users (only two) of the organization can NOT send emails from their Outlook 2010 SP1 client : messages are stuck in Outbox. But incoming emails are perfectly well received ! Send/receive window only shows 0x8004011C (unknown error) or 0x80040115 (The connection to Microsoft Exchange is unavailable) errors. In the status bar, Outlook says "Connected to Microsoft Exchange" (That's absolutely crazy !). Profile settings : cached mode, encryption enabled, Outlook anywhere enabled (since a direct RPC connection is no longer possible with Exchange 2013), NTLM Authentification. Complete deletion and recreation of Outlook profile does not solve anything. When these users log on to OWA, they can send messages without any problems.
Could anyone help me
I will add that when switching to ONLINE mode, this problem does not surface. Also no problems with OWA, active sync, etc..
This is a big issue for us and our customer is becoming frustrated. Anyone have an update, info to share or something to try?
We have a couple cases open atm, none have helped.
Anyone else out there with this issue? Very unhappy users as they took their notebooks out of the office for the weekend and a few experienced the problem with outgoing emails getting stuck in the outbox. "Use OWA" is not an answer anyone wants to hear. Any suggestions.
We have the same issue. Clients - Outlook 2010, 2013.
Users can send mail via outlook only without cached mode. All users.
We are experiencing the same issue with Outlook 2010 and Outlook 2013 on Exchange 2013 on Windows Server 2012. The cause seems to be linked to additional mailboxes - when manually added to accounts, rather than letting Outlook auto-add after a user gets given FullAccess permissions. Remove additional mailboxes and restart Outlook. Possibly linked to SendAs permissions on mailboxes that users are given FullAccess to, but it's very inconsistent so haven't been fully able to establish one way or another.
Same configuration doesn't affect Exchange 2010, seems like a Exchange 2013 bug to me.
Thank you Adrian for workaround!
Needed to take it one step further - removed additional mailboxes from Outlook as Adrian recommends, then a redo in EAC for delegation on each mailbox - not 100% confirmed, but seems to clear this up.
NOTE: Exchange 2013 on Windows 2012 coexisting with Exchange 2010 - mailboxes were migrated from 2010.
Also - doesn't look like groups are available for delegation. they are there from the migration, but I can't seem to add groups for delegation in 2013, need to research more..
Adrian!! You rock. This was the root cause for sure. After previously failing within minutes to hours with cached mode outbox issues, we have now gone since last Thursday with no problems at all.
Brilliant Adrian. Had me stumped for 3 days straight. Very time consuming fix however, I had around 40 users I had to go around removing all the additional mailboxes and readding them. God forbid if you are in a large organisation.
Anyone implemented CU1 yet? Have you noticed whether this issue has been resolved? Still trying to find a definitive list of bugs fixed.
Today i will install CU1 in the test enviroment before installing it live.
Hopefully it will solve a lot of problems.
Problems not solved with the CU1 version. i have the feeling they even get worse.
We are seeing the same issue in Exchange 2013 CU1 with Exchange 2010 coexist. I had to go into my Outlook profile and manually change the security settings, and have seem some odd issues trying to connect to public folders and download the address book that are still on the Exchange 2010 environment. Changing the security setting seems to be the fix for both of these.
Odd that these settings are not getting populated correctly when creating a new Outlook profile and letting autodiscover setup the account. I am connecting to Exchange 2013 with Outlook 2013.
Also, how are others manually adding an exchange profile since with 2013 you are unable to enter in the FQDN of the CAS server since it appears to now be using a GUID formatted name? You pretty much have to rely on Autodiscover to properly configure the account, which isn't really a big deal, but plays a major role in proper auto configuration of the Outlook profile.
Well , I have now a working system : I have also changed this in to the registery and recreated the outlook profile and now all outlooks connects without asking for password. The GUID name of the server is standard now , I did read it in a post from the exchange team.
Following key added :
Windows Registry Editor Version 5.00
Clients use LM and NTLM authentication, but they never use NTLMv2 session security. Domain controllers accept LM, NTLM, and NTLMv2 authentication.
Clients use LM and NTLM authentication, and they use NTLMv2 session security if the server supports it. Domain controllers accept LM, NTLM, and NTLMv2 authentication.
Clients use only NTLM authentication, and they use NTLMv2 session security if the server supports it. Domain controller accepts LM, NTLM, and NTLMv2 authentication.
Clients use only NTLMv2 authentication, and they use NTLMv2 session security if the server supports it. Domain controllers accept LM, NTLM, and NTLMv2 authentication.
Clients use only NTLMv2 authentication, and they use NTLMv2 session security if the server supports it. Domain controller refuses LM authentication responses, but it accepts NTLM and NTLMv2.
Clients use only NTLMv2 authentication, and they use NTLMv2 session security if the server supports it. Domain controller refuses LM and NTLM authentication responses, but it accepts NTLMv2.
Also. I tested connecting to my mailbox that is on Exchange 2013 with Outlook 2010 and the proper Security Settings were pulled down into Outlook under the security Tab:
Outlook 2010 Profile Security Settings
Encrypt Data Between Microsoft Outlook and Microsoft Exchange - Checked
Logon Network Security: Negotiate Authentication
Outlook 2013 Profile Security Settings ( Do not work. Outlook prompts for password )
Encrypt Data Between Microsoft Outlook and Microsoft Exchange - NOT Checked
Logon Network Security: Anonymous Authentication
I have similar issue. Outlook 2007 / with 1 additional mailbox in Cached mode. The only working solution in my case is to use Online mode. After changing to online mode all is working fine.
Well , I have now a working system : I have also changed this in to the registery and recreated the outlook profile and now all outlooks connects without asking for password. The GUID name of the server is standard now , I did read it in a post from the exchange team.
Following key added :
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
"lmcompatibilitylevel"=dword:00000001
Value
Meaning
0
Clients use LM and NTLM authentication, but they never use NTLMv2 session security. Domain controllers accept LM, NTLM, and NTLMv2 authentication.
1
Clients use LM and NTLM authentication, and they use NTLMv2 session security if the server supports it. Domain controllers accept LM, NTLM, and NTLMv2 authentication.
2
Clients use only NTLM authentication, and they use NTLMv2 session security if the server supports it. Domain controller accepts LM, NTLM, and NTLMv2 authentication.
3
Clients use only NTLMv2 authentication, and they use NTLMv2 session security if the server supports it. Domain controllers accept LM, NTLM, and NTLMv2 authentication.
4
Clients use only NTLMv2 authentication, and they use NTLMv2 session security if the server supports it. Domain controller refuses LM authentication responses, but it accepts NTLM and NTLMv2.
5
Clients use only NTLMv2 authentication, and they use NTLMv2 session security if the server supports it. Domain controller refuses LM and NTLM authentication responses, but it accepts NTLMv2.
Did you change the registry on the exchange 2013 sever or the client computers?
Did this fix the cached mode to work now with out prompting for password?
We are experiencing the same issue with Outlook 2010 and Outlook 2013 on Exchange 2013 on Windows Server 2012. The cause seems to be linked to additional mailboxes - when manually added to accounts, rather than letting Outlook auto-add after a user gets given FullAccess permissions. Remove additional mailboxes and restart Outlook. Possibly linked to SendAs permissions on mailboxes that users are given FullAccess to, but it's very inconsistent so haven't been fully able to establish one way or another.
Same configuration doesn't affect Exchange 2010, seems like a Exchange 2013 bug to me.
Spot on, had the same problem and could resolve it by removing the linked mailbox. The exact same configuration, actually the same mailbox with linked mailbox on Exchange 2010 didn't have the problem.
Exchange 2013 CU1 running on Windows Server 2012, so it looks like CU1 doesn't fix it.
Это средство исправления может устранить такие распространенные компьютерные ошибки, как BSODs, замораживание системы и сбои. Он может заменить отсутствующие файлы операционной системы и библиотеки DLL, удалить вредоносное ПО и устранить вызванные им повреждения, а также оптимизировать ваш компьютер для максимальной производительности.
Об ошибке Windows
Операционная система Windows сегодня используется миллионами пользователей персональных компьютеров и ноутбуков. И вполне вероятно, что большинство из них в свое время сталкивались с тем или иным типом ошибки Windows. Отчеты об ошибках были представлены компанией Microsoft для обеспечения средств сбора и отправки отладочной информации после ошибки или для применения шагов по устранению неполадок в зависимости от того, получил ли пользователь синтаксическую, логическую ошибку или ошибку времени выполнения.
Каким бы ни был случай, вот некоторые общие сведения об устранении неполадок, которые можно использовать для устранения ошибок Windows.
Симптомы 0x8004011c - Ошибка 0x8004011c
Ошибки Windows можно классифицировать как синтаксические ошибки, логические ошибки или ошибки времени выполнения.
Ошибки времени выполнения происходят во время работы приложения. Поэтому, когда ошибка возникает, она просто происходит без предупреждения, и компьютер выдает уведомление о том, что произошла ошибка.
Логические ошибки связаны с программированием. Ошибка вызывает непреднамеренный вывод или поведение. Если говорить о компьютерных системах, которые прошли все испытания и поступили в продажу, то логические ошибки случаются только тогда, когда произошли значительные изменения в физическом состоянии логической платы. Возможно, часть шин расплавилась или возникла подобная ситуация. Это может привести к тому, что компьютер внезапно издаст громкий звуковой сигнал или скрежещущий звук, и даже может перейти к внезапной нестабильной работе, замерзнуть или резко изменить температуру перед фактическим сбоем.
(Только для примера)
Причины ошибок Ошибка 0x8004011c - 0x8004011c
Ошибки Windows могут быть вызваны неисправностью аппаратных компонентов или повреждением ОС. Некоторые из них могут быть даже связаны с проблемами программирования, которые не были решены, поскольку ошибки не были устранены на этапе проектирования. Иногда ошибки Windows могут возникать из-за изменений, внесенных в компьютер.
Методы исправления
Для разных категорий ошибок Windows существуют разные шаги по устранению неполадок. Однако существуют общие шаги, которые можно применить, столкнувшись с этими ошибками. Вот они.
Если метод ремонта вам подошел, пожалуйста, нажмите кнопку upvote слева от ответа, это позволит другим пользователям узнать, какой метод ремонта на данный момент работает лучше всего.
Читайте также: